Foster-Daimler tractor

Last updated

Foster-Daimler tractor
Experimental Tractors of the First World War Q70906.jpg
Type Tractor
Place of origin United Kingdom
Service history
Used by United Kingdom
Wars First World War
Production history
Manufacturer William Foster & Co. &
Daimler Company Limited
Unit cost£1,866
No. built97 for Royal Marine Artillery
Specifications
MassAlmost 14 long tons (14 t)

EngineDaimler 6-cylinder double-sleeve valve petrol
105 bhp (78 kW)
Drive 4x2
Transmission2 speed
ReferencesVehicles at war [1] & The devil's chariots [2] [ page needed ]

The Foster-Daimler tractor, often called the Daimler-Foster tractor, was a heavy tractor built by William Foster & Co. in the early 20th century. It was used by the armed forces of the United Kingdom as a heavy artillery tractor during the First World War, it also formed the basis of the experimental Tritton trenching machine and its power unit was used in early British tanks.

Contents

Design

The Foster-Daimler tractor weighed almost 14 long tons (14 t), it was powered by a Daimler 6-cylinder double-sleeve valve petrol engine that developed 105 brake horsepower (78 kW) with a two-speed gearbox. [2] [3] The tractors were driven by traction engine-type rear wheels that were 8 feet (2.4 m) in diameter and 2 feet (0.61 m) wide; they could tow loads of 35 long tons (36 t). [2] [ page needed ]

History

The Battle of the Somme, July-november 1916 Q1346.jpg
Foster-Daimler hauling a wagon during the Battle of the Somme
Tritton Trench Crosser 1915.jpg
The Tritton trenching machine
NYT - Big British gun going to its position.jpg
Foster-Daimler hauling a BL 7.5-inch Mk III gun

The Foster-Daimler tractor was first built in 1912 as a joint venture between Lincoln based agricultural machinery manufacturers William Foster & Co. and Daimler Company Limited. It was produced as a petrol-engined heavy tractor for export to countries with limited coal reserves, principally in South America. [1] [2]

In late 1914 the Coventry Ordnance Works developed the BL 15-inch howitzer. Weighing over 60 long tons (61 t) these howitzers were broken down into several loads for road transportation. [2] [ page needed ] Upon receipt of an order for twelve 15-inch howitzers from the Royal Navy, the general manager of the Coventry Ordnance Works Rear-Admiral Reginald Bacon approached Daimler for the provision of tractors to tow the ordnance. Daimler referred Bacon to William Tritton, the managing director of William Foster. [2] [ page needed ] It was agreed the Foster-Daimler tractor would be adapted for the purpose of towing the broken down 15-inch howitzers, and an order for 97 tractors was placed at £1,866 per unit, along with 291 special towed wagons. [2] [ page needed ]

Acceptance trials for the tractor were conducted in Lincoln on 10 December 1914, and in early 1915 the 15-inch howitzers and the Foster-Daimler tractors were taken into service with the Royal Marine Artillery attached to the Royal Naval Division. [1] [2] In service, eight Foster-Daimler tractors were used to tow each 15-inch howitzer. The tractors could be used conventionally when travelling on roads or, if fitted with flanged wheels, could move along railways. [1]

Tritton trenching machine

The December 1914 acceptance trials included a bridging demonstration where a tractor towed two trailers of bridging timbers to a broad ditch; after engineers spanned the ditch, the tractor and trailers were waved across and one of the trailers toppled over the side, collapsing the bridge. [2] [ page needed ] After this accident Bacon remarked to Tritton that an armed and armoured vehicle that could lay its own bridge would be of great value. [2] [ page needed ] Bacon continued to press Tritton about the idea and designs were drawn up for a modified Foster-Daimler tractor capable crossing a gap. These were presented to Winston Churchill by the end of December and an order was placed for the production of an experimental prototype. [2] [ page needed ]

The prototype, known by various names including the Tritton trenching machine, the Tritton trencher and the Tritton trench crossing machine, consisted of a Foster-Daimler tractor with the usual front wheels removed and a sub-frame fitted to the front of the chassis which had two wide road wheels in tandem – increasing the vehicles overall length to approximately 31 ft (9.4 m) – and two steel bridging girders 15 ft (4.6 m) in length were hung below the chassis on either side. [2] [4] [3] As the vehicle approached a trench the front wheel would protrude across, and as it made contact the girders were lowered allowing the machine to drive across the trench. Once across, the vehicle would winch the girders across, reverse over them and be prepared to cross another trench. [2] [4] [3] Bacon proposed fitting every trencher with a pair of headlights and another light on each side of the vehicles, each with glass 2 feet (0.61 m) in diameter and painted with the head of a ferocious Chinese warrior to unnerve the enemy during night attacks. [2] [ page needed ]

Initially, the machine was to be ready for demonstration by 1 February 1915. This was subsequently delayed to mid-February but due to further various delays did not occur until 9 June 1915. [2] [ page needed ] The machine had little difficulty in laying the girders over single trenches 8 ft (2.4 m) wide, but after crossing it required at least 25 ft (7.6 m) of clear ground to retrieve the girders. It was also found to be extremely nose-heavy, too cumbersome, and underpowered. [2] [3] Despite the design's ingenuity, it was found to be impractical and the tractor was returned to its original configuration at a cost of £20. [2] [3]

Legacy

Probably the greatest contribution the Foster-Daimler tractor made to the war effort was to bring William Foster & Co, and particularly William Tritton, into the development and production of the tank. [1] Tritton was one of the engineers who developed the first completed tank design, Little Willie and its successor "Mother" ("Big Willie"), as well as the Mark A "Whippet" and Mark C "Hornet" medium tanks, with William Foster & Co. conducting much of the production. [1] [5]

Little Willie, Mother, and the unchanged Mark I tank used the Foster-Daimler tractor's 105 brake horsepower Daimler engine, gear-box and differential, as it was one of the few power units available in England with the required power, speeding up development and production. [4] [3] [6] They were also used in the Mark II, Mark III, and Mark IV tanks. Later, to increase the power of the engine, it was modified with aluminium pistons and dual carburettors to deliver 125 brake horsepower (93 kW), the upgraded engine being installed in the last 200 Mark IV tanks. [3] [6]

Related Research Articles

<span class="mw-page-title-main">History of the tank</span> Chronicle of armoured combat vehicles

The history of the tank begins with World War I, when armoured all-terrain fighting vehicles were introduced as a response to the problems of trench warfare, ushering in a new era of mechanized warfare. Though initially crude and unreliable, tanks eventually became a mainstay of ground armies. By World War II, tank design had advanced significantly, and tanks were used in quantity in all land theatres of the war. The Cold War saw the rise of modern tank doctrine and the rise of the general-purpose main battle tank. The tank still provides the backbone to land combat operations in the 21st century.

<span class="mw-page-title-main">Crusader tank</span> British WWII cruiser tank

Crusader, in full "Tank, Cruiser Mk VI, Crusader", also known by its General Staff number A.15, was one of the primary British cruiser tanks during the early part of the Second World War. Over 5,000 tanks were manufactured and they made important contributions to the British victories during the North African campaign. The Crusader tank would not see active service beyond Africa but the chassis of the tank was modified to create anti-aircraft, fire support, observation, communication, bulldozer and recovery vehicle variants.

<span class="mw-page-title-main">Half-track</span> Land vehicle with both regular wheels and continuous tracks

A half-track is a civilian or military vehicle with regular wheels at the front for steering and continuous tracks at the back to propel the vehicle and carry most of the load. The purpose of this combination is to produce a vehicle with the cross-country capabilities of a tank and the handling of a wheeled vehicle.

<span class="mw-page-title-main">BL 60-pounder gun</span> Heavy field gun

The Ordnance BL 60-pounder was a British 5 inch (127 mm) heavy field gun designed in 1903–05 to provide a new capability that had been partially met by the interim QF 4.7 inch Gun. It was designed for both horse draft and mechanical traction and served throughout the First World War in the main theatres. It remained in service with British and Commonwealth forces in the inter-war period and in frontline service with British and South African batteries until 1942 being superseded by the BL 4.5 inch Medium Gun.

<span class="mw-page-title-main">BL 5.5-inch medium gun</span> Medium gun

The BL 5.5-inch gun was a British artillery gun introduced during the middle of the Second World War to equip medium batteries.

<span class="mw-page-title-main">William Foster & Co.</span>

William Foster & Co Ltd was an agricultural machinery company based in Lincoln, Lincolnshire, England often called "Fosters of Lincoln." The company can be traced back to 1846, when William Foster purchased a flour mill in Lincoln. William Foster then proceeded to start small scale manufacturing of mill machinery and threshing machinery. The mill was converted to an iron foundry by 1856, thus becoming the original Wellington Foundry. By 1899 the works had moved to the Wellington foundry in New Boultham and the original works were then occupied by William Rainforth. During the First World War Fosters built some of the first tanks for the British Army.

<span class="mw-page-title-main">Flying Elephant</span> Super-heavy tank

The Flying Elephant was a proposed super-heavy tank, planned but never built by the British during World War I.

<span class="mw-page-title-main">Morris C8</span> Artillery tractor

The Morris Commercial C8 FAT, commonly known as a Quad, is an artillery tractor used by the British and Commonwealth forces during the Second World War. It was used to tow field artillery pieces, such as the 25-pounder gun-howitzer, and anti-tank guns, such as the 17-pounder.

<span class="mw-page-title-main">Tanks in World War I</span> Use of tanks during World War 1

The development of tanks in World War I was a response to the stalemate that developed on the Western Front. Although vehicles that incorporated the basic principles of the tank had been projected in the decade or so before the War, it was the alarmingly heavy casualties of the start of its trench warfare that stimulated development. Research took place in both Great Britain and France, with Germany only belatedly following the Allies' lead.

<span class="mw-page-title-main">Richard Hornsby & Sons</span> Engine and machinery manufacturer in Grantham, Lincolnshire, England from 1828 until 1918

Richard Hornsby & Sons was an engine and machinery manufacturer in Grantham, Lincolnshire, England from 1828 until 1918. The company was a pioneer in the manufacture of the oil engine developed by Herbert Akroyd Stuart, which was marketed under the Hornsby-Akroyd name. The company developed an early track system for vehicles, selling the patent to Holt & Co. in America. In 1918, Richard Hornsby & Sons became a subsidiary of the neighbouring engineering firm Rustons of Lincoln, to create Ruston & Hornsby.

Sir William Ashbee Tritton, JP, was a British expert in agricultural machinery, and was directly involved, together with Major Walter Gordon Wilson, in the development of the tank. Early in World War I he was asked to produce tractors for moving heavy howitzers, the result being eventually the first tanks.

<span class="mw-page-title-main">Artillery tractor</span> Specialized heavy-duty form of tractor unit used to tow artillery pieces

An artillery tractor, also referred to as a gun tractor, is a specialized heavy-duty form of tractor unit used to tow artillery pieces of varying weights and calibres. It may be wheeled, tracked, or half-tracked.

<span class="mw-page-title-main">Little Willie</span> British prototype armoured tank

<span class="mw-page-title-main">Scammell Pioneer</span> Tractor unit

The Scammell Pioneer was a British 6×4 tractor unit used in World War II as an artillery tractor, recovery vehicle and tank transporter.

<span class="mw-page-title-main">M5 Tractor</span> World War II era artillery tractor

The M5 13 ton High Speed Tractor was a World War II era artillery tractor that was used by the US Army from 1942 to tow medium field artillery pieces.

<span class="mw-page-title-main">BL 6-inch gun Mk XIX</span> United Kingdom heavy field gun

The British BL 6-inch gun Mk XIX was introduced in 1916 as a lighter and longer-range field gun replacement for the obsolescent BL 6-inch gun Mk VII.

<span class="mw-page-title-main">Holt Manufacturing Company</span> Defunct American tractor company, predecessor to Caterpillar Tractor Company

The Holt Manufacturing Company began with the 1883 founding of Stockton Wheel Service in Stockton, California, United States. Benjamin Holt, later credited with patenting the first workable crawler ("caterpillar") tractor design, incorporated the Holt Manufacturing Company in 1892. Holt Manufacturing Company was the first company to successfully manufacture a continuous track tractor By the early 20th century, Holt Manufacturing Company was the leading manufacturer of combine harvesters in the US, and the leading California-based manufacturer of steam traction engines.

<span class="mw-page-title-main">M6 Tractor</span> Artillery tractor

The M6 High-Speed Tractor was an artillery tractor used by the US Army during World War II.

The Vickers Medium Dragon was a fully-tracked British field artillery tractor made by Vickers, produced in various versions from 1922 to 1937. The Medium Dragon towed a wide range of artillery, from 18-pounder field guns to BL 60-pounder heavy field guns. It was developed from the carrier version of a 'Tropical Tank' designed by Lt-Colonel Philip Johnson, using components from the running gear of the Vickers Medium Mark I tank.

<span class="mw-page-title-main">Vickers Light Dragon</span>

The Vickers Light Dragon was a fully-tracked British field artillery tractor made by Vickers-Armstrongs Ltd from 1929 to 1935. Designed to tow small-calibre field guns, it complemented Vickers' Medium Dragon tractor, which pulled medium to heavy artillery.

References

  1. 1 2 3 4 5 6 Bishop, Denis; Ellis, Chris (1979). Vehicles at War. London: George Allen & Unwin Ltd. pp. 25, 29, 31–33, 50 & 59. ISBN   0-498-01699-4.
  2. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Glanfield, John (2001). The Devil's Chariots: the origins and secret battles of first tanks. Stroud: Sutton. ISBN   0750927062 via Google Books.
  3. 1 2 3 4 5 6 7 Macksey, Kenneth (1972). The Guinness Book of Tank Facts and Feats. Enfield: Guinness Superlatives Limited. pp. 50–51 & 53. ISBN   0900424-09-5.
  4. 1 2 3 Ellis, Chris; Chamberlain, Peter (1972). Fighting Vehicles: the machines that revolutionised land warfare in the Twentieth Century. London: Hamlyn. p. 17. ISBN   0-600-33481-3.
  5. Hogg, Ian V.; Weeks, John (1980). The Illustrated Encyclopedia of Military Vehicles. London: New Burlington Books. p. 21 & 110–188. ISBN   0-90628-675-1.
  6. 1 2 Fuller, J. F. C. (1920). Tanks in the Great War: 1914–1918. London: John Murray. pp. 38–39.