Threepence (New Zealand coin)

Last updated

Threepence
New Zealand
Value3d (£NZ)
Mass1.41 g
Diameter16.3 mm
EdgePlain
Composition1933–1946: 50% silver, 50% quaternary alloy
1947–1965: cupronickel (75% copper, 25% nickel)
Years of minting1933–1965
Obverse
1933 Threepence, New Zealand, Obverse.png
DesignCrowned bust of George V
Designer Percy Metcalfe
Reverse
1933 Threepence, New Zealand, Reverse.png
DesignCrossed patu clubs.
Designer George Kruger Gray

The New Zealand threepence is a coin of the New Zealand pound issued from 1933 to 1965. Equal to three pence, the coin was the smallest in size of all New Zealand pound coinage, and the smallest in denomination of the initial 1933 issue of New Zealand pound coinage, produced due to shortages of British silver coins resulting from the devaluation of local currency relative to the pound sterling. British artist George Kruger Gray designed the coin's reverse design after an earlier pattern design featuring a hei-tiki was rejected by a coinage design committee organised by Gordon Coates. It features two crossed patu (ornamental Māori clubs) below the label "3d". Initially struck in silver by the Royal Mint, it was struck in cupronickel from 1947 onward due to rising precious metal prices. Following decimalisation in 1967, the threepence was replaced by the coinage of the New Zealand dollar.

Contents

Background

British threepence first circulated in New Zealand during the early 19th century alongside various other silver coinage, including American, Spanish, French, and Dutch issues alongside other British silver denominations. The British pound sterling was confirmed as the sole legal tender in 1858, [1] but had in effect been the sole circulating currency since 1847. [2] Australia began issuing its own coinage in 1910, including the Australian threepence. Widespread circulation of the Australian silver coinage in New Zealand began in 1930, when Australia devalued the Australian pound relative to the pound sterling. Large amounts of the devalued Australian currency began to flood into New Zealand, eventually making up 30–40% of all coinage in circulation by early 1933. The counterfeiting of silver coins also increased during this period. [3]

New Zealand followed in devaluing the New Zealand pound in 1933, triggering mass smuggling of silver coinage to Britain and its other colonial possessions. After several decades of proposals, the New Zealand government pursued the creation of a domestic coinage the same year. [4] The Coinage Act 1933, outlined the weights and sizes of the six denominations of New Zealand silver coinage, defining the threepence as a coin weighing 1.41 grams, with a silver fineness of .500. [5] The coin was worth one quarter of a shilling. Although domestic firms offered to produce the coinage, the New Zealand government deemed that domestic facilities were not sufficient for mass production, and contracted with the Royal Mint for minting. [6]

Design

All coinage obverses from the initial 1933 issue featured a crowned bust of George V designed by Royal Mint designer Percy Metcalfe, initially for use on the Southern Rhodesian pound. This was based on an older crowned bust by Australian sculptor Bertram Mackennal, used on the coinage of other British colonies and dominions. Reverse designs were a matter of collaboration between the Royal Mint Advisory Committee, headed by Deputy Master Robert Johnson, and the New Zealand government. Local artists and members of the New Zealand Numismatic Society were consulted throughout the design process, but British designers were tasked with creating an initial series of designs, despite requests from local art societies for domestic artistry of the coins. Metcalfe and George Kruger Gray were experienced artists who had each previously designed coinage for several other British dominions and colonies. The two were tasked to submit designs for each of the five initial silver denominations of coinage. [7] [8]

Kruger Gray's threepence pattern featured kotiate (a short Māori hand weapon) above two crossed tewhatewha (long axe-shaped Māori clubs). Numismatic historian and Coinage Design Committee member Allan Sutherland described this designs as "very effective", but it was rejected by the Advisory Committee, alongside Kruger Gray's similar sixpence design. [9] Metcalfe submitted two threepence designs. The first was highly minimalist, featuring the Roman numeral III between the letters N and Z, both letters being 90-degree flipped images of the other. This minimalist design, recalling Metcalfe's similar sixpence proposal, was rejected without further comment in favor of his Māori-inspired design, featuring a hei-tiki. [9]

Metcalfe's hei-tiki threepence featured the figure in a central vertical strip between a large "3" and "D". [lower-alpha 1] Sir Thomas Wilford, the New Zealand High Commissioner, was particularly fond of this design, believing it would be instantly recognizable to New Zealanders. Kruger Gray was asked to model a new pattern off of Metcalfe's base, in order to standardize the lettering of the coinage. [9]

Redesigns

A Maori chief holding a patu. MaoriChief19C.jpg
A Māori chief holding a patu.

New Zealand's prime minister George Forbes held a very weak premiership, and finance minister Gordon Coates served as de facto acting prime minister, especially during Forbes' extended stays in Britain. In July 1933, Coates appointed a Coinage Design Committee, composed of various local artists alongside members of the New Zealand Numismatic Society. [11] Sutherland was highly critical of the tiki, describing it as a fertility charm inappropriate for the modern age, incorrectly believing the figure to represent a human foetus. Coates ordered the design to be abandoned; however, in 1940, the hei-tiki motif would be re-used in essentially unmodified form for the halfpenny. [12] Despite initially calling for the "elimination of all native ornament" on the coins, Coates's Coinage Design Committee called for the threepence reverse to comprise "two Māori panels, crossed at right angles with figure 3d in clear space in centre." [11]

This proposal was baffling to Kruger Gray, who was not given any illustrations or instructions on how to design the panels. [13] In August, Coates offered an alternate design suggestion, a stringed mere. Although he experimented with individual meres at Coates's suggestion, he submitted a design crossing two of the clubs, reminiscent of his earlier Southern Rhodesian sixpence. Coates initially protested the modification, but conceded after Kruger Gray argued that a single mere would create a design that was lopsided and difficult to strike. [14]

By late 1933, the basic design had been accepted, and Kruger Gray created a final pattern incorporating traditional ornamentation. Referencing Augustus Hamilton's 1901 book, Maori Art , he based the clubs off of two antique patu; one from the Ngāti Tūmatakōkiri, as well as a club from the vicinity of Lake Waikaremoana held at the Otago Museum. The threepence was the last design of the initial series of coinage to be completed. [14] The coins entered production, with the first 1933-dated threepences reaching New Zealand in mid-March, 1934. [15] British threepences, like all other pound sterling coinage, ceased to be legal tender on 1 February 1935. [16]

Reception

The threepence were frequently likened by the public to bottles of ginger beer. [17] Defending the coins, ethnologist Johannes Andersen described the patu design as unfairly criticised by ignorant New Zealanders, and proposed that foreigners encountering the coins would learn about the country's culture from investigating the designs. Andersen, however, raised that the patu were rendered upside-down and suggested that this should be altered in future issues of the coinage. [18]

Mintage and production

Threepence mintages were relatively consistent compared to other New Zealand coins. Only in 1938 and 1949 were none produced, although an extremely low mintage of 40,000 led to a 1935 key date for the coin. Several million threepence were minted most years from 1933 to 1965. [19] Due to high prices of silver in the years following World War II, previously silver denominations (including the threepence) were instead made of a cupronickel alloy from 1947, besides a crown issue in 1949. Much silver coinage was recalled from circulation and melted down by banks. The threepence was abolished in 1967 in favour of the new denominations of the New Zealand dollar. [20]

Proof threepences were included in proof sets produced in 1935 and 1953, [21] as well as prooflike set produced in 1965. [19]

George V Threepence Mintage (thousands) [19]
Date1933193419351936
Mintage6,0006,000402,760
George VI Threepence Mintage (thousands) [19]
Date1937193819391940194119421943194419451946194719481949195019511952
Mintage2,880003,0002,0001,7603,1204,4002,8402,5206,0806,4004,0008003,6008,000
Elizabeth II Threepence Mintage (thousands) [19]
Date1953195419551956195719581959196019611962196319641965
Mintage4,0004,0004,0004,8008,0004,0004,0004,0004,8006,0004,0006,4004,200

Notes

  1. Pence was frequently abbreviated "d.", stemming from the Roman denarius denomination. [10]

Related Research Articles

<span class="mw-page-title-main">Threepence (British coin)</span> Former coin of the United Kingdom and other territories

The British threepence piece, usually simply known as a threepence, thruppence, or thruppenny bit, was a denomination of sterling coinage worth 180 of one pound or 14 of one shilling. It was used in the United Kingdom, and earlier in Great Britain and England. Similar denominations were later used throughout the British Empire and Commonwealth countries, notably in Australia, New Zealand and South Africa.

<span class="mw-page-title-main">Australian pound</span> Former currency of Australia

The pound was the currency of Australia from 1910 until 14 February 1966, when it was replaced by the Australian dollar. Like other £sd currencies, it was subdivided into 20 shillings, each of 12 pence.

George Edward Kruger Gray was an English artist, best remembered for his designs of coinage and stained glass windows.

<span class="mw-page-title-main">Threepence (Irish coin)</span>

The threepence or 3d coin was a subdivision of the pre-decimal Irish pound, worth 180 of a pound or 14 of a shilling. Leath reul literally means "half reul", the reul being a sixpence coin worth about the same as the Spanish real. As with all other Irish coins, it resembled its British counterpart, as the Irish pound was pegged to the British pound until 1979.

<span class="mw-page-title-main">Sixpence (British coin)</span> Former coin of the United Kingdom and other territories

The British sixpence piece, sometimes known as a tanner or sixpenny bit, was a denomination of sterling coinage worth 140 of one pound or half of one shilling. It was first minted in 1551, during the reign of Edward VI, and circulated until 1980. The coin was made from silver from its introduction in 1551 until 1947, and thereafter in cupronickel.

The threepence or threepenny bit was a denomination of currency used by various jurisdictions in England, Ireland, Scotland and Wales, valued at 1/80 of a pound or 14 of a shilling until decimalisation of the pound sterling and Irish pound in 1971. It was also used in some parts of the British Empire, notably Australia, New Zealand and South Africa.

<span class="mw-page-title-main">Florin (New Zealand coin)</span> Coin of the New Zealand pound from 1933 to 1965

The florin is a coin issued for the New Zealand pound from 1933 to 1965, equal to two shillings or twenty-four pence. The coin features a kiwi on the reverse and the reigning monarch on the obverse. It was introduced in 1933 as part of the first issue of New Zealand pound coinage, due to shortages of British silver coins resulting from the devaluation of local currency relative to the pound sterling. A lengthy design process was further protracted due to differing proposed design motifs between the Royal Mint, supporting a reverse design featuring heraldic ships, and the Gordon Coates–appointed Coinage Committee's proposed kiwi design. This disagreement led to almost a dozen proposed designs and revisions before the finalised issue entered circulation in February 1934. Initially struck in silver by the Royal Mint to replace the previous imperial florin, it was struck in cupronickel from 1947 due to rising precious metal prices. While proposed as the base of a decimalised New Zealand coinage since the 1930s, the florin was ultimately replaced in 1967 by the coinage of the New Zealand dollar.

<span class="mw-page-title-main">Florin (Australian coin)</span>

The Australian florin was a coin used in the Commonwealth of Australia before decimalisation in 1966. The florin was worth two shillings . The denomination was first minted in 1910 to the same size and weight as the British florin.

<span class="mw-page-title-main">Shilling (Australian)</span>

The shilling, informally called a "bob", was a type of silver coinage issued by the Commonwealth of Australia, that circulated prior to the decimalisation of Australian coinage. The Australian shilling was derived from the British pre-decimal sterling pound system and was first issued following the passing of the Australian Coinage Act 1909, which established Australia's first formal currency system. The shilling was issued as part of Australia's silver coinage, which included the two-shilling (florin), the sixpence and the threepence. The shilling was minted from 1910 until 1963. During this period there was one significant modification to the design of the Australian shilling, the change in its reverse design, which occurred in 1938 when the design was altered from the Australian Coat of Arms (1910–1936) to the visage of a Merino ram’s head (1938–1963).

<span class="mw-page-title-main">Jubilee coinage</span> British coins depicting Queen Victoria

The Jubilee coinage or Jubilee head coinage are British coins with an obverse featuring a depiction of Queen Victoria by Joseph Edgar Boehm. The design was placed on the silver and gold circulating coinage beginning in 1887, and on the Maundy coinage beginning in 1888. The depiction of Victoria wearing a crown that was seen as too small was widely mocked, and was replaced in 1893. The series saw the entire issuance of the double florin (1887–1890) and, in 1888, the last issue for circulation of the groat, or fourpence piece, although it was intended for use in British Guiana. No bronze coins were struck with the Jubilee design.

<span class="mw-page-title-main">Old Head coinage</span> 1893–1901 British coins

The Old Head coinage or Veiled Head coinage were British coins struck and dated between 1893 and 1901, which featured on the obverse a portrait by Thomas Brock of an aged Queen Victoria wearing a diadem partially hidden by a widow's veil. It replaced the Jubilee coinage, struck since 1887, which had been widely criticised both for the portrait of the Queen, and because the reverses of most of the coins did not state their monetary values. Some denominations continued with their old reverse designs, with Benedetto Pistrucci's design for the sovereign extended to the half sovereign. New designs for some of the silver coinage were inaugurated, created either by Brock or by Edward Poynter, and all denominations less than the crown, or five-shilling piece, stated their values.

<span class="mw-page-title-main">Halfpenny (New Zealand coin)</span> Former denomination of New Zealand currency

The halfpenny was first issued in New Zealand in 1940, seven years after the first introduction of a domestic pound coinage. The coin's issuing was scheduled to align with the centennial of the Treaty of Waitangi and the New Zealand centennial, alongside the penny and centennial half-crown. Designed by Leonard Cornwall Mitchell after winning a government-sponsored design competition, the halfpenny features the head of the reigning monarch on the obverse, with a hei-tiki pedant ornamented with simplified kowhaiwhai woodcarvings on the reverse. The smallest of all denominations of the New Zealand pound, the copper coin was worth 1/480th of a pound, or 1/120th of a crown, the largest coinage denomination. It was discontinued alongside all other New Zealand currency following decimalisation in 1967.

<span class="mw-page-title-main">Waitangi crown</span> New Zealand commemorative coin

The Waitangi crown is a commemorative crown coin struck in 1935 by the British Royal Mint for the Dominion of New Zealand to commemorate the 1840 signing of the Treaty of Waitangi, often seen as New Zealand's founding constitutional document. It was the first five-shilling piece minted of the New Zealand pound and the nation's first coin minted primarily for collectors. Following the rejection of designs by James Berry and George Kruger Gray, Royal Mint designer Percy Metcalfe was commissioned to design the reverse. Design disagreements plagued the production of the crown, and only an extremely small mintage of 1,128 was struck and distributed to collectors. Released to muted media coverage and a general lack of interest in coin collecting during the economic aftermath of the Great Depression, the coin has become heavily sought by collectors of New Zealand coinage. Regularly selling for thousands of dollars, one pattern issue of the coin auctioned at over $70,000 USD, becoming the most expensive New Zealand coin ever sold.

<span class="mw-page-title-main">Coins of the New Zealand pound</span> Former New Zealand coinage

The first coinage of the New Zealand pound was introduced in 1933 in response to large-scale smuggling of prior British imperial coinage after devaluation of New Zealand exchange rates relative to the pound sterling and large influxes of other foreign coinage into circulation. The Coinage Act, 1933 outlined the weights and compositions of various denominations, out of which five silver issues entered circulation over the following year, after lengthy disagreement between rival coinage design committees. The copper penny and halfpenny entered circulation in 1940, corresponding to anniversary of the New Zealand centennial. An eighth denomination of coin, the five-shilling piece or crown, was produced solely through three commemorative issues. The first issue, the Waitangi crown, was produced in extremely limited quantities and sold to collectors. Later commemorative crown issues in 1949 and 1953 were produced for circulation.

<span class="mw-page-title-main">Penny (New Zealand pre-decimal coin)</span> New Zealand coin

The New Zealand penny is a large bronze coin issued from 1939 to 1965. Introduced seven years after the larger denominations of New Zealand pound coinage, the coin's issuing was scheduled to align with the centennial of the Treaty of Waitangi and the New Zealand centennial, alongside the halfpenny and centennial half-crown. Featuring the standard portrait of the ruling monarch on the obverse, the reverse features a tūī bird perched atop a kōwhai branch.

<span class="mw-page-title-main">Shilling (New Zealand coin)</span> Silver or cupronickel coin minted 1933–1965

The New Zealand shilling was first issued in 1933 alongside four other denominations of New Zealand pound coinage, introduced due to shortages of comparable British silver coinage following the devaluation of the New Zealand pound relative to the pound sterling. Roughly 24 mm in diameter, it is slightly larger than the British coin it replaced. Worth twelve pence, the denomination was equal to half a florin, two sixpence, or two-fifths of a half-crown.

<span class="mw-page-title-main">Sixpence (New Zealand coin)</span> New Zealand coin

The New Zealand sixpence is a coin of the New Zealand pound issued from 1933 to 1965. Equal to twice a threepence or half a shilling, the sixpence was one of five denominations of silver coinage introduced in the initial issue of New Zealand coinage in 1933. Early designs for the coin featuring spears and silver ferns were rejected by committee. The coin's final reverse, designed by George Kruger Gray, features a female huia, an extinct New Zealand bird, perched atop a branch. Issued in 50% silver until a postwar rise in silver prices triggered a shift to cupronickel in 1947, the coin was minted with relative consistency until 1965, when it was discontinued following decimalisation and the adoption of the New Zealand dollar.

<span class="mw-page-title-main">Half-crown (New Zealand coin)</span> Former denomination of the New Zealand pound

The half-crown is the largest of five denominations of New Zealand pound coinage first issued in 1933. Introduced due to shortages of comparable British silver coinage following the devaluation of the New Zealand pound relative to the pound sterling, the coin measures roughly 32 mm (1.3 in) in diameter. It was equal to thirty pence, two and a half shillings, or an eighth of a pound.

<span class="mw-page-title-main">Centennial half-crown</span> Commemorative coin of New Zealand

The Centennial half-crown is a commemorative coin of the New Zealand half-crown released in 1940 to coincide with the hundredth anniversary of the Treaty of Waitangi. Designed by New Zealand artist Leonard Cornwall Mitchell, the coin features a Māori woman surrounded by both traditional and modern architecture. Although a relatively large number, over a hundred thousand, were issued, the coin was obtainable at face value and quickly disappeared from circulation.

<span class="mw-page-title-main">1949 New Zealand crown</span> Commemorative coin of the New Zealand pound

A commemorative crown coin of the New Zealand pound was produced for a planned visit by King George VI in 1949. Having first visited the country in 1927 in his duties as the Duke of York, proposals for a visit by the monarch to New Zealand in 1940 were postponed by the outbreak of World War II. A 1949 tour by the king and queen to Australia and New Zealand was announced in early 1948, the first visit of a reigning monarch to the dominion.

References

Citations

  1. Matthews, Ken (March 2003). "The Legal History of Money in New Zealand" (PDF). Reserve Bank of New Zealand Bulletin. 66 (1): 40–49. Archived (PDF) from the original on 1 November 2023. Retrieved 24 November 2023.
  2. Hargreaves 1972, p. 32.
  3. Hargreaves 1972, pp. 141–142.
  4. Hargreaves 1972, p. 142.
  5. "An act to make Provision with respect to Currency, Coinage, and Legal Tender in New Zealand". Coinage Act of 1933. New Zealand Parliament.
  6. Hargreaves 1972, pp. 144–145.
  7. Stocker 2005, pp. 145–146.
  8. Johnson, Robert A. (1934). Sixty-Fourth Annual Report of the Deputy Master and Comptroller of the Royal Mint – 1933 (Report). London: His Majesty's Stationery Office. pp. 6–8. Archived from the original on 4 November 2023. Retrieved 24 November 2023.
  9. 1 2 3 Stocker 2005, p. 149.
  10. "Pounds, Shillings and Pence". Royal Mint Museum. Retrieved 2 January 2024.
  11. 1 2 Stocker 2005, pp. 150–151.
  12. Stocker, Mark (2011). "Completing the Change: The New Zealand Coin Reverses of 1940" (PDF). British Numismatic Journal (81): 211–212.
  13. Stocker 2005, p. 151.
  14. 1 2 Stocker 2005, p. 153.
  15. Stocker 2005, p. 157.
  16. Hargreaves 1972, pp. 149–150.
  17. Hargreaves 1972, p. 147.
  18. Andersen, Johannes C. (30 April 1934). ""WARLIKE SHILLING": Experts Criticize New Zealand Coins". Dominion . p. 8.
  19. 1 2 3 4 5 Čuhaj, George S. (2014). 2014 Standard Catalog of World Coins (41st ed.). Iola, Wisconsin: Krause Publications. p. 1633. ISBN   9781440235672.
  20. Hargreaves 1972, p. 181-183.
  21. Humble, Michael (December 1992). "The Waitangi Proof Set Revisited". New Zealand Numismatic Journal (70): 13–17.

Bibliography