Top (tool)

Last updated
A typical Top used in rope making. Top (Tool).jpg
A typical Top used in rope making.

A top is a hand tool with an iron loop and hook used in the creation and splicing of rope. A Top is used to simultaneously hold a piece of rope while providing a hole to separate the "lays" (or strands) of synthetic or natural rope for splicing. A variation of a Top, the gripfid, is used for ply-split braiding. The gripfid has a jamming cleat to pull a cord back through the cord split by the fid's point. A variation of a Top can also be used as a rope wrench, rope separator or rope tool can be used in the manufacture of laid rope. The top is used to prevent the strands of a rope twisting together prematurely, which would lead to the rope being loose, allowing it to untwist. The amount of pressure applied to the top determines the stiffness of the final product; more pressure forces the strands together more tightly, making a rope that is harder to bend.

Contents

Tops come in a variety of forms for use on different types of rope. The simplest is a forked stick, used to create three strand rope, however more elaborate grooved bullet-shaped and cast iron types are available. [1] Depending on the gauge of rope being made, the top can either be handheld or mounted on a trolley that moves along the ropewalk.

Usage

Top2 (Tool).jpg

A rope is pushed into the curved hook to hold the rope securely. A Fid is then pushed through the loop to create an opening to prepare for splicing.

History

Invented in 1822 in Dudley by Alexander Adams the Top was first used to braid and weave rope or twine together.

19 century first evolution of the tool. Albert Geuppert, Wrench for Tightening Rope Bed, c. 1939, NGA 28392.jpg
19 century first evolution of the tool.

By the 1900’s the tool was refined to aid specifically with splicing large ropes over 1 inch (25.4 mm) diameter – such as those used on ships.

See also

Related Research Articles

Knot Method of fastening or securing linear material

A knot is an intentional complication in cordage which may be practical or decorative, or both. Practical knots are classified by function, including hitches, bends, loop knots, and splices: a hitch fastens a rope to another object; a bend fastens two ends of a rope to each another; a loop knot is any knot creating a loop; and splice denotes any multi-strand knot, including bends and loops. A knot may also refer, in the strictest sense, to a stopper or knob at the end of a rope to keep that end from slipping through a grommet or eye. Knots have excited interest since ancient times for their practical uses, as well as their topological intricacy, studied in the area of mathematics known as knot theory.

Constrictor knot Binding hitch knot

The constrictor knot is one of the most effective binding knots. Simple and secure, it is a harsh knot that can be difficult or impossible to untie once tightened. It is made similarly to a clove hitch but with one end passed under the other, forming an overhand knot under a riding turn. The double constrictor knot is an even more robust variation that features two riding turns.

A whipping knot or whipping is a binding of marline twine or whipcord around the end of a rope to prevent its natural tendency to fray.

<i>Yawara</i> Japanese weapon

The yawara is a Japanese weapon used in various martial arts. Numerous types of jujutsu make use of a small rod, made of wood, that extends somewhat from both ends of a person's fist which is known as a yawara. The yawara likely originated from the use of the tokkosho, a Buddhist symbolic object, by monks in feudal Japan. The tokkosho was used during the Edo period and it was made of brass. Sometimes a short rope or cord would be looped around the user's wrist to distract someone else while in combat. The methods of using a yawara may have been created by samurai that used tantojutsu, which was combat that made use of a short knife. According to another theory, a samurai might have fought with the scabbard "when a more deadly weapon was not necessary".

The common whipping is the simplest type of whipping knot, a series of knots intended to stop a rope from unravelling. As it can slip off the rope easily, the common whipping should not be used for rope ends that will be handled. This whipping knot is also called 'wolf' whipping in some parts of the world. The 'Hangman's knot' is a variation of this whipping knot.

<span class="mw-page-title-main">Rope</span> Linear combination of plies, yarns or strands which are twisted or braided together

A rope is a group of yarns, plies, fibres, or strands that are twisted or braided together into a larger and stronger form. Ropes have tensile strength and so can be used for dragging and lifting. Rope is thicker and stronger than similarly constructed cord, string, and twine.

<span class="mw-page-title-main">Glossary of climbing terms</span> List of definitions of terms and concepts related to rock climbing and mountaineering

This glossary of climbing terms is a list of definitions of terms and jargon related to rock climbing and mountaineering. The specific terms used can vary considerably between different English-speaking countries; many of the phrases described here are particular to the United States and the United Kingdom.

<span class="mw-page-title-main">Whip</span> Tool or weapon used to train animals either by sound or physical pain.

A whip is a tool or weapon designed to strike humans or other animals to exert control through pain compliance or fear of pain. They can also be used without inflicting pain, for audiovisual cues, such as in equestrianism. They are generally either a firm stick designed for direct contact, or a flexible line requiring a specialized swing. The former is easier and more precise, the latter offers longer reach and greater force. A hunting whip combines a firm stick with a flexible line.

Rope splicing Semi-permanent joint between two ropes

Rope splicing in ropework is the forming of a semi-permanent joint between two ropes or two parts of the same rope by partly untwisting and then interweaving their strands. Splices can be used to form a stopper at the end of a line, to form a loop or an eye in a rope, or for joining two ropes together. Splices are preferred to knotted rope, since while a knot typically reduces the strength by 20–40%, a splice is capable of attaining a rope's full strength. However, splicing usually results in a thickening of the line and, if subsequently removed, leaves a distortion of the rope. Most types of splices are used on 3-strand rope, but some can be done on 12-strand or greater single-braided rope, as well as most double braids.
While a spliced 3-strand rope's strands are interwoven to create the splice, a braided rope's splice is constructed by simply pulling the rope into its jacket.

Twine Cord composed of two or more thinner strands twisted together

Twine is a strong thread, light string or cord composed of two or more thinner strands twisted, and then twisted together (plied). The strands are plied in the opposite direction to that of their twist, which adds torsional strength to the cord and keeps it from unravelling. This process is sometimes called reverse wrap. The same technique used for making twine is also used to make thread, which is thinner, yarn, and rope, which is stronger and thicker, generally with three or more strands.

<span class="mw-page-title-main">Prusik knot</span> Type of knot

A Prusik is a friction hitch or knot used to attach a loop of cord around a rope, applied in climbing, canyoneering, mountaineering, caving, rope rescue, ziplining, and by arborists. The term Prusik is a name for both the loops of cord used to tie the hitch and the hitch itself, and the verb is "to prusik". More casually, the term is used for any friction hitch or device that can grab a rope. Due to the pronunciation, the word is often misspelled Prussik, Prussick, or Prussic.

<span class="mw-page-title-main">Parachute cord</span> Multi-core rope originally used for parachutes

Parachute cord is a lightweight nylon kernmantle rope originally used in the suspension lines of parachutes. This cord is now used as a general purpose utility cord. This versatile cord was used by astronauts during the 82nd Space Shuttle mission to repair the Hubble Space Telescope.

Wire rope Metal rope

Wire rope is several strands of metal wire twisted into a helix forming a composite rope, in a pattern known as laid rope. Larger diameter wire rope consists of multiple strands of such laid rope in a pattern known as cable laid.

Fid Ropework tool

A fid is a conical tool traditionally made of wood or bone. It is used to work with rope and canvas in marlinespike seamanship. A fid differs from a marlinspike in material and purposes. A marlinspike is used in working with wire rope, natural and synthetic lines, may be used to open shackles, and is made of metal. A fid is used to hold open knots and holes in canvas, and to separate the "lays" of synthetic or natural rope for splicing. A variation of the fid, the gripfid, is used for ply-split braiding. The gripfid has a jamming cleat to pull a cord back through the cord split by the fid's point.

<i>Kumihimo</i> Traditional Japanese artform of making cords and braids

Kumihimo is a traditional Japanese artform of making braids and cords. Literally meaning "gathered threads", kumihimo are made by interlacing reels of yarn, commonly silk, with the use of traditional, specialised looms - either a marudai or a takadai (高台).

<span class="mw-page-title-main">Eye splice</span> Method of creating a loop in the end of a rope

The eye splice is a method of creating a permanent loop in the end of a rope by means of rope splicing.

The manufacture of textiles is one of the oldest of human technologies. To make textiles, the first requirement is a source of fiber from which a yarn can be made, primarily by spinning. The yarn is processed by knitting or weaving, which turns yarn into cloth. The machine used for weaving is the loom. For decoration, the process of colouring yarn or the finished material is dyeing. For more information of the various steps, see textile manufacturing.

Fiador knot Type of knot

The fiador knot is a decorative, symmetrical knot used in equine applications to create items such as rope halters, hobbles, and components of the fiador on some hackamore designs. As traditionally described, it is a four strand diamond knot in which six of the eight ends loop back into the knot, thus allowing it to be tied with a single line. While a specific knot is discussed in this article, the fiador knot has also been treated as an entire class of multi-strand knots similarly made with a single line.

<span class="mw-page-title-main">String (structure)</span>

String is a long flexible structure made from fibers twisted together into a single strand, or from multiple such strands which are in turn twisted together. String is used to tie, bind, or hang other objects. It is also used as a material to make things, such as textiles, and in arts and crafts. String is a simple tool, and its use by humans is known to have been developed tens of thousands of years ago. In Mesoamerica, for example, string was invented some 20,000 to 30,000 years ago, and was made by twisting plant fibers together. String may also be a component in other tools, and in devices as diverse as weapons, musical instruments, and toys.

References

  1. "Make Rope". Make Rope. Retrieved 2016-04-22.