Torque screwdriver

Last updated August 07, 2023

A torque screwdriver is a screwdriver with components that ensure tightening to a specified torque, ensuring tightening which is sufficient, but not excessive. An insufficiently tightened screw connection may loosen in operation, and excessive tightening can damage parts; for example, if the nuts holding the wheel of a car in place are too loose, or damaged by overtightening, a wheel may come off at speed. Torque screwdrivers are used in mechanical production, manufacturing, and maintenance; their use is part of quality assurance.

Torque-limiting clutch

The clutch is the component that defines a torque screwdriver. This is achieved with steel balls rolling between indented plates, compressed by a spring at one end, and the other side driving a screw or fastener. The torque limiting clutch is the part of the tool that limits the amount of torque being applied to the fastener at the receiving end of the tool. On simpler tools the clutch settings may be marked with arbitrary numbers (e.g., from 1 for the lowest available torque to 20 for the highest, without necessarily having a linear relationship with actual torque) rather than torque values.

Torque screwdrivers are available with several types of clutch, including “cam-over”, “cushion clutch”, and “auto shutoff”. Most of these clutch types are used in electric screwdrivers, air screwdrivers, impulse screwdrivers, manual torque screwdrivers, and cordless torque screwdrivers. Each type has the ability to preset a specified torque value. In some cases a tool may need to be certified in a calibration lab to verify its torque output; a certificate may be issued by an organisation such as NIST in the United States.

Cam over

A Cam-over clutch is usually found in a manual torque screwdriver where the clutch simply “fags“ or “cams-over”, meaning that it signals the maximum torque has been achieved.

Cushion clutch

Cushion clutch or “slip clutch” styles are found in both electric screwdrivers and air screwdrivers. This clutch style is similar to the “cam-over” once the final torque is reached because the clutch continues to cam over and slip. It will continue to run until the operator releases the throttle.

Auto shutoff

An auto-shutoff clutch switches off the tool once the maximum torque is reached. Auto shutoff tools are designed for critical applications. They provide precision torque control and reduce energy consumption by eliminating idling.

Drive source

The torque may be provided manually (by the operator's wrist), by an electric motor, or by a pneumatic drive.

Manual torque screwdriver

Manual torque screwdrivers are made in straight and pistol-grip models. Manual torque screwdrivers can have a range of 0.04 N⋅m (6 in oz) to 20 N⋅m (170 in lb).

Electric torque screwdriver

Screwdriving requires torque to be applied by a rotary motion. Drilling responds to the same description; general-purpose power tools ("drill/drivers") are designed for both screwdriving and drilling, with a slipping clutch and low speed added to the drilling functionality. In an industrial environment dedicated tools optimised for their particular function are more often used.

Corded

Corded electric torque screwdrivers are commonly made in three different designs: pistol grip, angle and inline. This type is the one mostly used for industrial assembly applications such as electronic assembly and small parts assembly. Brushed electric motors and more efficient brushless motors are used. The torque ranges typically from 0.02 N⋅m to at least 27 N⋅m,^[1] with speeds of up to 2,000 revolutions per minute (rpm).

Electric screwdrivers with transducers can be categorized into three groups according to their physical features:

Pistol grip: Enables the user to hold the tool and apply up to 10 N⋅m of torque; more than that is not recommended due to ergonomics. Lets the user hold the tool with one hand and offers better accessibility in some cases.
Angle type: With angle-type tightener user can tighten with up to 100 N⋅m torque using both hands, or even more with the help of assistive tools. In some cases it can offer better for accessibility to the tightening point.
Inline type: Looks like a regular screwdriver. Not possible to tighten manually more with more than 2 N⋅m of torque. Commonly used on machines and manipulators. Can apply go up to 1000 N⋅m torque on machines. Mostly used in the trucking and flight industries, especially for wheel tightening.

Cordless

Cordless torque screwdriver are powered by batteries, usually rechargeable batteries with voltages from 3.6 to 18 volts. Dedicated screwdrivers for domestic use tend to operate off 3.6 to 4.8 volts and have relatively low maximum torque; drill/drivers operate off higher voltages and can deliver higher maximum torque. Cordless torque screwdrivers are used for the same applications as cordless screwdrivers without torque control.

Pneumatic torque screwdriver

The pneumatic torque screwdriver is widely used for assembly requiring higher levels of torque. These tools are commonly used in automotive, aerospace and marine manufacturing. Pneumatic tools require a constant pressurized air source. Torque for this type of torque screwdriver ranges from 0.17 N⋅m (1.5 in lb) to 30 N⋅m (265 in lb), and speeds range from 800 to 2600 rpm. These tools must be near their compressed air source, not a problem in manufacturing but less suitable for general maintenance. Torque may not be controlled as accurately as by electrically powered tools.

Related Research Articles

<span class="mw-page-title-main">Clutch</span> Mechanical device that connects and disconnects two rotating shafts or other moving parts

A clutch is a mechanical device that allows the output shaft to be disconnected from the rotating input shaft. The clutch's input shaft is typically attached to a motor, while the clutch's output shaft is connected to the mechanism that does the work.

A screwdriver is a tool, manual or powered, used for turning screws.

A drill is a tool used for making round holes or driving fasteners. It is fitted with a bit, either a drill or driver chuck. Hand-operated types are dramatically decreasing in popularity and cordless battery-powered ones proliferating due to increased efficiency and ease of use.

A torque wrench is a tool used to apply a specific torque to a fastener such as a nut, bolt, or lag screw. It is usually in the form of a socket wrench with an indicating scale, or an internal mechanism which will indicate when a specified (adjustable) torque value has been reached during application.

Torx is a trademark for a type of screw drive characterized by a 6-point star-shaped pattern, developed in 1967 by Camcar Textron. A popular generic name for the drive is star, as in star screwdriver or star bits. The official generic name, standardized by the International Organization for Standardization as ISO 10664, is hexalobular internal. This is sometimes abbreviated in databases and catalogs as 6lobe. Torx Plus,Torx Paralobe and Torx ttap are improved head profiles.

A limited-slip differential (LSD) is a type of differential that allows its two output shafts to rotate at different speeds but limits the maximum difference between the two shafts. Limited-slip differentials are often known by the generic trademark Positraction, a brand name owned by General Motors.

Dremel is a multinational brand of power tools, focusing on home improvement and hobby applications. Dremel is known primarily for its rotary tools such as the Dremel 3000, 4000 and 8200 series which are similar to the pneumatic die grinders used in the metalworking industry by tool or moldmakers. Dremel later expanded its product range and now produces butane tools, benchtop and hand-held saws and oscillating tools.

A socket wrench is a type of spanner that uses a closed socket format, rather than a typical open wrench/spanner to turn a fastener, typically in the form of a nut or bolt.

A hammer drill, also known as a percussion drill or impact drill, is a power tool used chiefly for drilling in hard materials. It is a type of rotary drill with an impact mechanism that generates a hammering motion. The percussive mechanism provides a rapid succession of short hammer thrusts to pulverize the material to be bored, so as to provide quicker drilling with less effort. If a hammer drill's impact mechanism can be switched off, the tool can be used like a conventional drill to also perform tasks such as screwdriving.

A pneumatic motor, or compressed air engine, is a type of motor which does mechanical work by expanding compressed air. Pneumatic motors generally convert the compressed air energy to mechanical work through either linear or rotary motion. Linear motion can come from either a diaphragm or piston actuator, while rotary motion is supplied by either a vane type air motor, piston air motor, air turbine or gear type motor.

The shank is the end of a drill bit grasped by the chuck of a drill. The cutting edges of the drill bit contact the workpiece, and are connected via the shaft with the shank, which fits into the chuck. In many cases a general-purpose arrangement is used, such as a bit with cylindrical shaft and shank in a three-jaw chuck which grips a cylindrical shank tightly. Different shank and chuck combination can deliver improved performance, such as allowing higher torque, greater centering accuracy, or moving the bit independently of the chuck, with a hammer action.

Motor drive means a system that includes a motor. An adjustable speed motor drive means a system that includes a motor that has multiple operating speeds. A variable speed motor drive is a system that includes a motor and is continuously variable in speed. If the motor is generating electrical energy rather than using it – this could be called a generator drive but is often still referred to as a motor drive.

A torque limiter is an automatic device that protects mechanical equipment, or its work, from damage by mechanical overload. A torque limiter may limit the torque by slipping, or uncouple the load entirely. The action of a torque limiter is especially useful to limit any damage due to crash stops and jams.

An impact wrench is a socket wrench power tool designed to deliver high torque output with minimal exertion by the user, by storing energy in a rotating mass, then delivering it suddenly to the output shaft. It was invented by Robert H. Pott of Evansville, Indiana.

<span class="mw-page-title-main">Impact driver</span> Tool

An impact driver is a tool that delivers a strong, sudden rotational force and forward thrust. The force can be delivered either by striking with a hammer in the case of manual impact drivers, or mechanically in the case of powered impact drivers.

Metabowerke GmbH is a manufacturer of power tools for professional users headquartered in Nürtingen, Germany. The company was founded in the 1920s and got its name from a hand drill, the so-called "Metallbohrdreher". Today, Metabo offers a wide range of power tools. The company is owned by the American investment firm Kohlberg Kravis Roberts & Co.

A rotary hammer, also called rotary hammer drill is a power tool that can perform heavy-duty tasks such as drilling and chiseling hard materials. It is similar to a hammer drill in that it also pounds the drill bit in and out while it is spinning. However, rotary hammers use a piston mechanism instead of a special clutch. This causes them to deliver a much more powerful hammer blow, making it possible to drill bigger holes much faster. Most rotary hammers have three settings: drill mode, hammer drill or just hammer, so they can act as a mini jackhammer.

A torque tester is used as a quality control device to test or calibrate torque controlled tools. This includes electronic torque wrenches, click torque wrenches, dial torque wrenches, electric screwdrivers, air screwdrivers, pulse tools, cordless screwdrivers, nutrunners, and torque screwdrivers. Today's advanced torque testers include the ability to measure in clockwise and counter-clockwise directions, and potentially convert to engineering units. They can also have different modes of operation, or include a certificate from a local regulator.

<span class="mw-page-title-main">Bolt (fastener)</span> Threaded fastener with an external male thread requiring a matching female thread

A bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Bolts are very closely related to screws.

References

1 2 Specification of Skil 6222 mains screwdriver, for domestic use; torque is 27 N⋅m Archived 2010-12-26 at the Wayback Machine

External links

Preset torque screwdriver example
US 3119247,Grabovac, Bosko,"Limited Torque Tool",published 1964-01-28 ; Grabovac (1964) is the patent on Apex Tool Group's Utica torque screwdrivers
Utica catalog; see cutaway illustration on page 5

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[skil-1] 1 2 Specification of Skil 6222 mains screwdriver, for domestic use; torque is 27 N⋅m Archived 2010-12-26 at the Wayback Machine

[1]