Train whistle

Last updated
One of two (front and rear) whistles on steam locomotive 60163 Tornado 60163 Tornado front whistle.jpg
One of two (front and rear) whistles on steam locomotive 60163 Tornado

A train whistle or air whistle (originally referred to as a train trumpet or air trumpet) is an audible signaling device on a steam or gas locomotive, used to warn that the train is approaching, and to communicate with rail workers. Modern diesel and electric locomotives primarily use a powerful air horn instead of a whistle as an audible warning device. However, the word whistle continues to be used by railroaders in referring to such signaling practices as "whistling off" (sounding the horn when a train gets underway).

Contents

The need for a whistle on a locomotive exists because trains move on fixed rails and thus are uniquely susceptible to collision. This susceptibility is exacerbated by a train's enormous weight and inertia, which make it difficult to quickly stop when encountering an obstacle. Hence a means of warning others of the approach of a train from a distance is necessary. As train whistles are inexpensive compared to other warning devices, the use of loud and distinct whistles became the preferred solution for railway operators.

Steam whistles were almost always actuated with a pull cord (or sometimes a lever) that permitted proportional (tracker) action, so that some form of "expression" could be put into the sound. Many locomotive operators would have their own style of blowing the whistle, and it was often apparent who was operating the locomotive by the sound. Modern locomotives often make use of a push button switch to operate the air horn, eliminating any possibility of altering the horn's volume or pitch.

North American usage

North American steam locomotive whistles have different sounds from one another. They come in many forms, from tiny little single-note shriekers to larger plain whistles with deeper tones (a deep, plain train whistle is the "hooter" of the Norfolk & Western, used on their A- and Y-class Mallet locomotives). Even more well known were the multi-chime train whistles. Nathan of New York copied and improved Casey Jones's boiler-tube chime whistle by casting the six chambers into a single bell, with open "steps" on top to save on casting.[ citation needed ]

Another very popular American train whistle was, again, a Nathan product. This was a five-note whistle, with a much shorter bell, and therefore, much higher in pitch. This whistle produced a bright G-major 6th chord (GBDEG) and, again, was heavily imitated, copies being made by many different railroads.

The most popular American chime train whistle was the three-note version. These were either commercially made (Crosby, Lunkenheimer, Star Brass, Hancock Inspirator Co. among others) or shop-made by the railroads themselves. Some famous and very melodious shop-made train whistles were Pennsy's passenger chimes and the Baltimore and Ohio's step-top three chimes. But the most beloved of all three-chime train whistles to the public and railroaders alike were the deep-chorded "steamboat minor" long-bells.[ citation needed ] A well known commercially made chime was Hancock Inspirator Company's three-note step top. These found use on almost every American railroad. Some railroads copied these also, examples being found on the old St. Louis–San Francisco Railway, Southern Railway (U.S.) and Illinois Central.

An air whistle mounted on a British Rail Class 483 EMU working on the Island Line. The whistles on the Class 483s were used by the previous Class 485 and 486 units and even the Class 71 locomotives and were fitted to the Class 483 units when the trains were rebuilt from 1938 tube stock in 1989. British Rail Class 483 Air whistle closeup.jpg
An air whistle mounted on a British Rail Class 483 EMU working on the Island Line. The whistles on the Class 483s were used by the previous Class 485 and 486 units and even the Class 71 locomotives and were fitted to the Class 483 units when the trains were rebuilt from 1938 tube stock in 1989.
GWR twin whistles, seen on 7827 Lydham Manor Lydham Manor 7827 Didcot (Whistles).jpg
GWR twin whistles, seen on 7827 Lydham Manor

Noise complaints from train whistles

It is not uncommon for the sound of a train's whistle to propagate for miles; yet vehicle operators still have a difficult time hearing the warning signal due to the vehicle's soundproofing and ambient noise within the cab (such as engine, road, radio, and conversation noises).

The need to blare a train's whistle loudly to be heard by the driver of a vehicle approaching a grade crossing has become a major disadvantage to the use of train whistles as a safety device and has caused much controversy among those living within earshot of the train's whistle. It has been documented that a train's whistle, when operating on compressed air, driving an exponential horn, has been measured at a higher decibel levels within the homes of nearby residents than within the cab of a vehicle sitting at the grade crossing. [1]

Given the tonal design of the train whistle, the sound level, how often trains pass through a given community, the number of grade crossings in proximity, and the time of day (night) of occurrence, community residents residing near crossing sometimes feel that train whistles have a serious detrimental effect on the quality of life despite the gain in safety that sounding the horn provides to motorists and pedestrians. [2] [3] However, one Federal Railroad Administration study has shown that the frequency of grade crossing accidents increases in areas where quiet zones are in effect. [1] [4] The study fails to account for other factors that were also introduced at the same time which may have also accounted for the reduction in accidents during the same period the study measured. [4] For instance, it was during the same period that locomotives began sporting the now crucially important tri-lamp headlight arrangement ("ditch lights") and reflector strips similar to those commonly found on highway tractor-trailers. [5] [6] [7] Additionally, the measurements were based on accidents at grade-crossings, which are very low numbers overall to begin with. A grade-crossing that had two accidents during the comparison years, when contrasted with only one accident during the control period, would statistically yield a high percentage-wise improvement in safety, when in reality, it was the difference in only one accident for that grade-crossing.

Conversely, there are those who do not object to the train whistle, as they believe it provides an important safety feature. [8] Some people even like the sound of the whistle, as it calls to mind a nostalgic era, as with the riverboats and their steam whistles and calliopes. However, no real studies have been performed by unbiased official entities to measure the real effects such noise has on a community. [9] [10] [11] [12] [13]

Quiet zones are created in municipalities where citizens of the community complain of the noise pollution from the increasing number of trains which decreases their quality of life. In order to be approved for quiet zones, extensive safety and traffic studies must be conducted. Municipalities and the owners of the tracks must work together to ensure all federal regulations are being met. Quiet zones require improvements which would include installing standard or conventional automatic warning devices such as gates with lights if not already installed Medians must be installed at the railroad crossings to ensure vehicles do not proceed into the opposite lane to go around the gates. [3] Once all safety measures are completed train whistles will be silenced at the railroad crossings.

Whistle code

Train whistles are used to communicate with other railroad workers on a train or in the yard. Specific combinations of long and short whistles have specific meanings. They are used to pass instructions, as a safety signal, and to warn of impending movements of a train. Despite the advent of modern radio communication, many of these whistle signals are still used today. (See also Train horn § Common horn signals.)

Signals below are North American practice:   represents short sounds, and   for longer ones.

SequenceMeaning
  Acknowledgment of any signal not otherwise provided for
   When train is stopped: backing up, or acknowledgment of a hand signal to back up; when moving: stop at next station
    Request for a signal to be given, or repeated if not understood
 When train is stopped: air brakes are applied and pressure is equalized
  Train releases brakes and proceeds
    Flagman return from the west or south
     Flagman return from the east or north
  Inspect the brake system for leaks or sticking brakes
   Warning that a second section of a timetabled train is following
    Instruction for flagman to protect rear of train
    Train is approaching public grade crossing(s), known as Rule 14L in almost all railroad operating rules; also used in Australia
Series of short blastsAn emergency exists, or if persons or livestock are on the track

Not all railroads use exactly the same whistle signals or assign the same meanings. Some railroads will use their own variations of the above. A few of the signals are obsolete because the workers they were used to communicate with (such as flagman) are now obsolete.

Other whistle codes

In Norway these signals are used:

SequenceMeaning
 Stand by or general acknowledgement
  Apply or increase manual brakes
   Apply manual brakes to stop the train as soon as possible
 Approaching railroad station or blind curve
  Decrease manual brakes; when repeated, fully release brakes
   Prepared for change of tracks, crossing or other situations that requires a gentle approach
Multiple shortDanger

These are some of the signals used in Finland:

SequenceMeaning
 Engine is starting forwards
  Engine is about to move backwards
  Warning, used approaching a crossing
   Danger

See also

Related Research Articles

<span class="mw-page-title-main">Train</span> Series of powered rail vehicles

A train is a series of connected vehicles that run along a railway track and transport people or freight. Trains are typically pulled or pushed by locomotives or railcars, though some are self-propelled, such as multiple units. Passengers and cargo are carried in railroad cars, also known as wagons. Trains are designed to a certain gauge, or distance between rails. Most trains operate on steel tracks with steel wheels, the low friction of which makes them more efficient than other forms of transport.

<span class="mw-page-title-main">Level crossing</span> Intersection where a road crosses a railway at the same level

A level crossing is an intersection where a railway line crosses a road, path, or airport runway, at the same level, as opposed to the railway line crossing over or under using an overpass or tunnel. The term also applies when a light rail line with separate right-of-way or reserved track crosses a road in the same fashion. Other names include railway level crossing, railway crossing, grade crossing or railroad crossing, road through railroad, criss-cross, train crossing, and RXR (abbreviated).

<span class="mw-page-title-main">Warning sign</span> Sign that warns people for a risk or danger

A warning sign is a type of sign which indicates a potential hazard, obstacle, or condition requiring special attention. Some are traffic signs that indicate hazards on roads that may not be readily apparent to a driver.

Rail transport terms are a form of technical terminology applied to railways. Although many terms are uniform across different nations and companies, they are by no means universal, with differences often originating from parallel development of rail transport systems in different parts of the world, and in the national origins of the engineers and managers who built the inaugural rail infrastructure. An example is the term railroad, used in North America, and railway, generally used in English-speaking countries outside North America and by the International Union of Railways. In English-speaking countries outside the United Kingdom, a mixture of US and UK terms may exist.

<span class="mw-page-title-main">Automatic Warning System</span>

Automatic Warning System (AWS) is a railway safety system invented and predominantly used in the United Kingdom. It provides a train driver with an audible indication of whether the next signal they are approaching is clear or at caution. Depending on the upcoming signal state, the AWS will either produce a 'horn' sound, or a 'bell' sound. If the train driver fails to acknowledge a warning indication, an emergency brake application is initiated by the AWS. However if the driver correctly acknowledges the warning indication by pressing an acknowledgement button, then a visual 'sunflower' is displayed to the driver, as a reminder of the warning.

<span class="mw-page-title-main">Air horn</span> Noisemaking device

An air horn is a pneumatic device designed to create an extremely loud noise for signaling purposes. It usually consists of a source which produces compressed air, which passes into a horn through a reed or diaphragm. The stream of air causes the reed or diaphragm to vibrate, creating sound waves, then the horn amplifies the sound making it louder. Air horns are widely employed as vehicle horns, installed on large buses, semi-trailer trucks, fire trucks, trains, and some ambulances as a warning device, and on ships as a signaling device.

<span class="mw-page-title-main">Steam whistle</span> Audible warning device powered by steam

A steam whistle is a device used to produce sound in the form of a whistle using live steam, which creates, projects, and amplifies its sound by acting as a vibrating system.

<span class="mw-page-title-main">1995 Fox River Grove bus–train collision</span> Grade crossing collision in Fox River Grove, Illinois

The 1995 Fox River Grove bus–train collision was a grade crossing collision that killed seven students riding aboard a school bus in Fox River Grove, Illinois, on the morning of October 25, 1995. The school bus, driven by a substitute driver, was stopped at a traffic light with the rearmost portion extending onto a portion of the railroad tracks when it was struck by a Metra Union Pacific Northwest Line train en route to Chicago.

<span class="mw-page-title-main">1987 Maryland train collision</span> 1987 rail transit disaster in Chase, Maryland, USA

On January 4, 1987, two trains collided on Amtrak's Northeast Corridor main line near Chase, Maryland, United States, at Gunpow Interlocking. Amtrak train 94, the Colonial, traveling north from Washington, D.C., to Boston, crashed at over 100 miles per hour (160 km/h) into a set of Conrail locomotives running light which had fouled the mainline. Fourteen passengers on the Amtrak train died, as well as the Amtrak engineer and lounge car attendant.

This article contains a list of jargon used to varying degrees by railfans, trainspotters, and railway employees in the United Kingdom, including nicknames for various locomotives and multiple units. Although not exhaustive, many of the entries in this list appear from time to time in specialist, rail-related publications. There may be significant regional variation in usage.

<span class="mw-page-title-main">Detonator (railway)</span> Signaling system for trains

A railway detonator, or fog signal is a coin-sized device that is used as a loud warning signal to train drivers. It is placed on the top of the rail, usually secured with two lead straps, one on each side. When the wheel of the train passes over, it explodes, emitting a loud bang. It was invented in 1841 by English inventor Edward Alfred Cowper.

<span class="mw-page-title-main">Train horn</span> Air horn used as a warning device on trains

A train horn is an air horn used as an audible warning device on diesel and electric-powered trains. Its primary purpose is to alert persons and animals to an oncoming train, especially when approaching a level crossing. They are often extremely loud, allowing them to be heard from great distances. They are also used for acknowledging signals given by railroad employees, such as during switching operations. For steam locomotives, the equivalent device is a train whistle.

<span class="mw-page-title-main">Nathan Manufacturing</span> American manufacturer

Nathan Manufacturing, Inc. is a division of Micro Precision Group which manufactures Airchime, Ltd. train horns mainly for North America. It is one of two major train horn manufacturers in the United States, with Leslie Controls, Inc. being the other.

<span class="mw-page-title-main">Hancock air whistle</span> Railroad whistle

The Hancock air whistle was a railroad whistle intended for use on North American diesel locomotives in place of the standard air horn. It was manufactured by the Hancock Valve Division of Manning, Maxwell and Moore.

<span class="mw-page-title-main">Vehicle horn</span> Sound-making device equipped to motor vehicles, buses, bicycles, trains, trams

A vehicle horn is a sound-making device installed on motor vehicles, trains, boats, and other types of vehicles. The horn is activated to warn others of the vehicle's presence or approach, or to call attention to some hazard. Motor vehicles, ships and trains are required by law in some countries to have horns. Trams, trollies, streetcars, and even bicycles are also legally required to have an audible warning device in many areas.

<span class="mw-page-title-main">Electric vehicle warning sounds</span> Safety feature

Electric vehicle warning sounds are sounds designed to alert pedestrians to the presence of electric drive vehicles such as hybrid electric vehicles (HEVs), plug-in hybrid electric vehicles (PHEVs), and battery electric vehicles (BEVs) travelling at low speeds. Warning sound devices were deemed necessary by some government regulators because vehicles operating in all-electric mode produce less noise than traditional combustion engine vehicles and can make it more difficult for pedestrians and cyclists to be aware of their presence. Warning sounds may be driver triggered or automatic at low speeds; in type, they vary from clearly artificial to those that mimic engine sounds and those of tires moving over gravel.

The Midland train crash was a rail crossing accident that occurred on November 15, 2012 in Midland, Texas. A freight train struck a flatbed trailer being used as a parade float carrying 26 passengers, killing four and injuring 16. The parade was en route to a veterans' benefit sponsored by the local charity Show of Support/Hunt for Heroes.

<span class="mw-page-title-main">Wayside horn</span> Audible signal used at level crossings

In rail transport, a wayside horn is an audible signal used at level crossings. They can be used in place of, or in addition to, the locomotive's horn as the train approaches the crossing. They are often used in special railroad "quiet zones" in the United States, where the engineer is not required to sound the locomotive's horn at a crossing. This reduces the ambient noise at the crossing, which may be desirable in residential areas. Such railroad crossings may still require the traditional bells as part of the crossing signals in addition to the wayside horns.

<span class="mw-page-title-main">Valhalla train crash</span> 2015 disaster in New York

On the evening of February 3, 2015, a commuter train on Metro-North Railroad's Harlem Line struck a passenger car at a grade crossing near Valhalla, New York, United States, between the Valhalla and Mount Pleasant stations, killing six people and injuring 15 others, seven very seriously. The crash is the deadliest in Metro-North's history, and at the time the deadliest rail accident in the United States since the June 2009 Washington Metro train collision, which killed nine passengers and injured 80.

Designs of level crossings, where railway lines cross roads or other paths, vary country-to-country.

References

  1. 1 2 "Federal Railroad Administration [Docket No. FRA 1999–6439, Notice No. 18]". Federal Railroad Administration.
  2. "Ill. Residents Want Train Whistle Ban To Remain". ABC News . 2000-07-18. Retrieved 2011-03-12.
  3. 1 2 "FRA Train Horn Rule Fact Sheet". Archived from the original on 2011-05-08. Retrieved 2011-03-12.
  4. 1 2 "Region" (PDF). Archived from the original (PDF) on 2009-05-09. Retrieved 2009-11-03.
  5. "Archived copy" (PDF). Archived from the original (PDF) on 2008-09-17. Retrieved 2008-06-05.{{cite web}}: CS1 maint: archived copy as title (link)
  6. "Federal Railroad Administration :Press Room". FRA.DOT.gov. Archived from the original on 2009-07-13. Retrieved 2009-11-03.
  7. "Archived copy" (PDF). Archived from the original (PDF) on 2008-09-17. Retrieved 2008-06-05.{{cite web}}: CS1 maint: archived copy as title (link)
  8. There were over 3000 wide ranging public comments regarding quiet zone rule. 70 FR 21844,
  9. "Seeking Silent Nights". The Bulletin. 2009-09-08. Archived from the original on 2011-06-05. Retrieved 2020-12-21.
  10. Gilbert, Michael (2009-09-22). "Quiet zone gains steam". OpPrairie.com. Archived from the original on 2012-07-25. Retrieved 2009-11-03.
  11. "News From 91.3 KUWS". BusinessNorth.com. Retrieved 2009-11-03.
  12. Frankfort Station Staff (2009-09-21). "Frankfort Hosts Quiet Zone Open House". FrankfortStation.com. Archived from the original on 2012-07-25. Retrieved 2009-11-03.
  13. "Local News You Can Use". San Clemente Times. Retrieved 2009-11-03.