 | This article needs additional citations for verification .(November 2012) |
| British Rail Class 71 | |||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 E5001 at Doncaster Works. | |||||||||||||||||||||||||||
| |||||||||||||||||||||||||||
| |||||||||||||||||||||||||||
| |||||||||||||||||||||||||||
| |||||||||||||||||||||||||||
The British Rail Class 71 was an electric locomotive used on the Southern Region of British Railways. Unlike Southern Region electro-diesel locomotives (such as classes 73 and 74) they could not operate away from the electrified (750 V DC) system.
As part of the British Transport Commission's Modernisation Plan of 1955, twenty-four electric locomotives were built in 1958 for the Kent Coast main lines. They were built at the British Rail workshops in Doncaster. Numbers were originally E5000–E5023 but the first locomotive, E5000, was renumbered E5024 in December 1962. [1] They were classified type HA under the Southern Region's pre-TOPS scheme.
Power collection was from a 3rd rail at 650V DC (Eastern & Central sections) or 750V DC (Western section) and control was by flywheel booster, as in British Rail Class 70. In some yards (notably Hither Green, South East London and Snowdown colliery near Dover) overhead wiring energised to 650V DC was used. This overhead collection method was only employed where it was deemed too dangerous to have an electrified third rail, with staff constantly at ground level reaching between vehicles to couple and uncouple trains. The overhead system utilised tram-style contact wires and pantographs – it was not necessary to collect traction current at speed and these provided a cost saving. The pantograph retracted into a cut-out recess in the roof when not in use, to keep within the loading gauge. Certain examples were delivered new without pantographs and ran with the recess vacant for some time. Evidently supply of the overhead equipment was short. Later in life (when the wiring in yards had almost completely been removed) during overhaul the opportunity was taken, on some examples of the class, to remove the sometimes-troublesome pantograph, leading again to a vacant roof recess.
The danger of electrocution of staff at track level was the entire tenet behind the Southern Region/Railway adopting the high-level brake pipes and control jumpers (nicknamed "bagpipes") that are so distinctive of SR stock. Low-level brake pipes were still fitted to maintain standards, but only used when high-level could not be. However Class 71 was not fitted with high-level jumpers. Ten redundant locos were modified to become Class 74 – emerging from Crewe works with "bagpipes" – in 1967/8. However 19 members of Class 33 (a pure diesel locomotive), which were modified at Eastleigh for push-pull operation of Southern Region TC units, were so fitted, along with nearly all SR-based members of shunting classes 03 and 08. In contrast almost all other contemporary locomotive classes (excepting notably classes 07, 09, 73 – all SR locomotives) had the multiple control jumpers and brake connectors on or under the buffer beam - a perilous place to be with 750 volts just inches away. Despite overhead equipment being confined to just a handful of yards, Class 71 was never retro-fitted with high-level connectors.
They were mixed-traffic locomotives. Their 2300/2552 hp was, for a small Bo-Bo locomotive, useful for both heavy freight and express passenger work. Acceleration on passenger trains (even when heavily loaded) was quite astonishing – to the extent that the climb out of London Victoria was almost unnoticeable. Prestigious services, including the heavy "Night Ferry" (London to Paris overnight by train-ferry) and the "Golden Arrow", the latter a Pullman service, were a mainstay of the class for many years.
Reliability of the class as a whole was good. [ citation needed ] As more areas of the Eastern section were given over to multiple unit (EMU) operation, however, the class found itself ousted almost completely from passenger work. During their later years their passenger duties were only the 'Night Ferry' and the nightly Victoria–Dover/Ramsgate newspaper train. Even this latter was rostered for a Class 33 (diesel locomotive) on Saturday nights, due to the probability of engineering works en route.
Their reliance on the electricity supply proved a hindrance. Much freight is moved overnight, when congestion on the busy commuter corridors is low; but this is also the time when engineering possessions of the track take place, the power being switched off to whole districts while this happens. Class 71 was therefore faced with frequent circuitous detours purely to stay "on the juice". An electric-only locomotive was also limited in scope for inter-regional freights. The flywheel booster allowed the locomotives to make short movements "off the juice" – in yards and depots for example – but not for significant distances. The smaller Class 73 electro-diesel locomotives deputised for them with ease (albeit often in pairs) and they had the ability to work lines when the power was off, and to run (at reduced power) on other regions where there was no third rail electricity supply. Class 71 was beginning to look (once again – see Class 74) like a white elephant. When the end came, most were scrapped in full working order, purely because they had no work.
A single member of the class, E5001, survives in preservation, in full working order (although currently minus its 3rd rail collector shoes). As with the remainder of the class, the preserved example never received the standard SR horns, retaining its air whistles right up until withdrawal.
By the late 1960s there was less work for the class, and several members were placed in store. Ten examples were eventually converted between 1967 and 1968 at the British Rail workshops in Crewe into electro-diesel locomotives. They were originally assigned the numbers E7001–E7010 but were numbered E6101–E6110 and classified type HB in the pre-TOPS scheme. Under TOPS the rebuilt ten became Class 74.
As a result of the rebuilds there were three renumberings from the remaining Class 71s (E5018, E5020 and E5022) to fill the gaps that were left by rebuilding of original locomotives E5003, E5005 and E5006.
The remaining fourteen became Class 71, numbered 71001 to 71014 under the TOPS scheme.
The class survived relatively un-scathed with no members being scrapped early. Two were awaiting repair at Ashford due to failures and the end finally came on the last day of 1977 when all 14 members were withdrawn en bloc as a result of motive power rationalisation. Their rostered duties were turned over to Class 73 electro-diesels as part of a new timetable and better use of that class.
The one preserved example (erstwhile 71 001) was saved by the National Railway Museum in York (currently on display at NRM Shildon) and has been restored as E5001.
| Type HA | Renumbered | Date renumbered | TOPS No. | Date withdrawn | Notes |
|---|---|---|---|---|---|
| E5000 | E5024 | Dec 1962 | — | Feb 1968 | Rebuilt as Class 74 E6104 |
| E5001 | — | — | 71 001 | Nov 1977 | Preserved |
| E5002 | — | — | 71 002 | Nov 1977 | |
| E5003 | — | — | — | Mar 1968 | Rebuilt as Class 74 E6107 |
| E5004 | — | — | 71 004 | Nov 1977 | |
| E5005 | — | — | — | Apr 1968 | Rebuilt as Class 74 E6108 |
| E5006 | — | — | — | Dec 1967 | Rebuilt as Class 74 E6103 |
| E5007 | — | — | 71 007 | Nov 1977 | |
| E5008 | — | — | 71 008 | Nov 1977 | |
| E5009 | — | — | 71 009 | Nov 1977 | |
| E5010 | — | — | 71 010 | Nov 1977 | |
| E5011 | — | — | 71 011 | Nov 1977 | |
| E5012 | — | — | 71 012 | Nov 1977 | |
| E5013 | — | — | 71 013 | Nov 1977 | |
| E5014 | — | — | 71 014 | Nov 1977 | |
| E5015 | — | — | — | Feb 1968 | Rebuilt as Class 74 E6101 |
| E5016 | — | — | — | Nov 1967 | Rebuilt as Class 74 E6102 |
| E5017 | — | — | — | Apr 1968 | Rebuilt as Class 74 E6109 |
| E5018 | E5003 | Dec 1968 | 71 003 | Nov 1977 | |
| E5019 | — | — | — | Feb 1968 | Rebuilt as Class 74 E6105 |
| E5020 | E5005 | Sep 1968 | 71 005 | Nov 1977 | |
| E5021 | — | — | — | May 1968 | Rebuilt as Class 74 E6110 |
| E5022 | E5006 | Sep 1968 | 71 006 | Nov 1977 | |
| E5023 | — | — | — | Mar 1968 | Rebuilt as Class 74 E6106 |
Having previously been made as ready-to-run by Golden Arrow Models of Hastings (OO gauge) and in kit form by MTK (Modern Traction Kits) thence DC Kits of Leeds (4mm /OO gauge) the HA /class 71 was also produced as both a kit and ready-to-run model (OO gauge) by Silver Fox Models [2]
In July 2016 Hornby released three versions of the HA /class 71 (all with working pantograph); these being E5001 (green, red stripes post-1963 rainstrips and with small warning panel), 71 012 (blue full yellow ends), E5022 (green, red stripes and without yellow warning panels or post-1963 rainstrips). A further version was produced exclusively for the NRM, this being E5001 (green, red stripe, post-1963 rainstrips but without yellow warning panels). More versions are expected in 2017. [3] In May 2017 DJ Models released its versions of the HA /class 71 in OO gauge with multiple versions becoming available. [4] However with the demise of the company in 2019, no more will be forthcoming.
{{cite web}}: CS1 maint: unfit URL (link)
A third rail, also known as a live rail, electric rail or conductor rail, is a method of providing electric power to a railway locomotive or train, through a semi-continuous rigid conductor placed alongside or between the rails of a railway track. It is used typically in a mass transit or rapid transit system, which has alignments in its own corridors, fully or almost fully segregated from the outside environment. Third rail systems are usually supplied from direct current electricity.
The British Rail Class 52 is a class of 74 Type 4 diesel-hydraulic locomotives built for the Western Region of British Railways between 1961 and 1964. All were given two-word names, the first word being "Western" and thus the type became known as Westerns. They were also known as Wizzos and Thousands. The final Class 52 locomotives were withdrawn from service in 1977.
The British Rail Class 06 is a class of 0-4-0 diesel-mechanical shunters built by Andrew Barclay Sons and Company from 1958 to 1960 for use on the Scottish Region of British Railways. They were originally numbered D2410–D2444 and later given the TOPS numbers 06001–06010.
The British Rail Class 08 is a class of diesel-electric shunting locomotives built by British Railways (BR). As the standard BR general-purpose diesel shunter, the class became a familiar sight at major stations and freight yards. Since their introduction in 1952, however, the nature of rail traffic in Britain has changed considerably. Freight trains are now mostly fixed rakes of wagons, and passenger trains are mostly multiple units or have Driving Van Trailers, neither requiring the attention of a shunting locomotive. Consequently, a large proportion of the class has been withdrawn from mainline use and stored, scrapped, exported or sold to industrial or heritage railways.
The British Rail Class 31 diesel locomotives, also known as the Brush Type 2 and previously as Class 30, were built by Brush Traction from 1957-62. They were numbered in two series, D5500-D5699 and D5800-D5862. Construction of the first locomotive was completed in the final week of September 1957, and the handing-over took place on 31 October. The first Class 31 entered service in November 1957, after the launch of the Class 20 locomotive and was one of the Pilot Scheme locomotives ordered by British Railways to replace steam traction.
The British Rail Class 73 is a British electro-diesel locomotive. The type is unusual in that it can operate from the Southern Region's 650/750 V DC third-rail or an on-board diesel engine to allow it to operate on non-electrified routes. This makes it very versatile, although the diesel engine produces less power than is available from the third-rail supply so the locomotives are rarely operated outside of the former Southern Region of British Rail. Following the withdrawal and scrapping of the more powerful Class 74 electro-diesels in 1977, the Class 73 was unique on the British railway network until the introduction of the Class 88 electro-diesels in 2017. Ten locomotives have been scrapped.
Class 80 was the TOPS classification allocated by British Rail to the prototype 25 kV AC electric locomotive. This locomotive was built by Metropolitan-Vickers, initially as a prototype gas turbine-electric locomotive, numbered 18100. British Rail allocated the number E1000 to the locomotive following its conversion from gas turbine propulsion.
An electro-diesel locomotive is a type of locomotive that can be powered either from an electricity supply or by using the onboard diesel engine. For the most part, these locomotives are built to serve regional, niche markets with a very specific purpose.
The British Rail Class 74 was an electro-diesel locomotive that operated on the Southern Region of British Railways, rebuilt from redundant Class 71 locomotives in the late 1960s. An electro-diesel locomotive is one that can operate either from an electrical supply, such as overhead catenary or an energised third rail, or from an onboard diesel engine. All were withdrawn between June 1976 and December 1977, and scrapped between 1977 and 1981.
The British Rail Class 81 is a class of AC electric locomotives that formerly operated on the West Coast Main Line of the London Midland Region of British Rail. Originally designated AL1, it was the first type of AC electric locomotive to be delivered to British Railways.
The British Rail Class 76, also known as Class EM1, is a class of 1.5 kV DC, Bo+Bo electric locomotive designed for use on the now-closed Woodhead Line in Northern England.
The British Rail Class 33, also known as the BRCW Type 3 or Crompton, is a class of Bo-Bo diesel-electric locomotives, ordered in 1957 and built for the Southern Region of British Railways between 1960 and 1962.
W. G. Bagnall was a locomotive manufacturer from Stafford, England which was founded in 1875 and operated until it was taken over in 1962 by English Electric.
The British Rail Class 29 were a class of 20 diesel-electric Bo-Bo locomotives produced by the re-engining of the NBL Type 2 units. The units were designed for both passenger and freight trains.
The NER Class ES1 was a class of two steeplecab electric locomotives commissioned by the North Eastern Railway in 1902.
Railway electric traction describes the various types of locomotive and multiple units that are used on electrification systems around the world.
The B class are a class of diesel locomotives built by Clyde Engineering, Granville for the Victorian Railways in 1952–1953. Ordered and operated by the Victorian Railways, they initiated the dieselisation of the system and saw use on both passenger and freight services, with many remaining in service today, both in preserved and revenue service. Some were rebuilt as the V/Line A class, while others have been scrapped.
The British Rail Class 88 is a type of mainline mixed traffic electro-diesel locomotive manufactured by Stadler Rail for Direct Rail Services (DRS) in the United Kingdom. The locomotive is part of the Stadler Euro Dual family. It is the first dual-mode locomotive in the UK to use the 25 kV AC electrification.
The Rhaetian Railway Gem 4/4 is a two member class of metre gauge Bo′Bo′ electro-diesel locomotives operated since 1968 by the Rhaetian Railway (RhB), which is the main railway network in the Canton of Graubünden, Switzerland.
An electro-diesel multiple unit (EDMU) or bi-mode multiple unit (BMU) is a form of a multiple unit that can be powered either by electric power picked up from the overhead lines or third rail or by using an onboard diesel engine, driving an electric generator, which produces AC or DC electric power.
