British Rail DHP1

Last updated

Clayton DHP1
Type and origin
Power typeDiesel-hydraulic
Builder Clayton Equipment Company
Build date1962-1963
Specifications
Configuration:
   UIC B'B'
  CommonwealthB-B
Gauge 4 ft 8+12 in (1,435 mm) standard gauge
Wheel diameter3 ft 3+12 in (1.003 m)
Minimum curve 4 chains (260 ft; 80 m)
Wheelbase 34 ft 0 in (10.36 m)
Length46 ft 3+12 in (14.11 m)
Width9 ft 0 in (2.74 m)
Height12 ft 6 in (3.81 m)
Loco weight56 long tons (57 t; 63 short tons)
Fuel capacity600 imp gal (2,700 l; 720 US gal)
Prime mover Rolls-Royce C8TFL, 4 off
Transmission Hydraulic
MU working Not fitted
Train heating Steam
Train brakes Vacuum
Performance figures
Maximum speed90 mph (140 km/h)
Power outputEngines: 375  hp (280 kW) at 1,800 rpm × 4
At rail: 1,200  hp (890 kW)
Tractive effort Maximum: 37,500  lbf (167  kN)
Career
Operators British Railways
DispositionScrapped

DHP1, meaning Diesel Hydraulic Prototype number 1, was a prototype Type 3 mainline diesel locomotive built between 1962 and 1963 by Clayton to demonstrate their wares to British Railways. It was designed for mixed traffic work, being equipped with steam heating facilities for working passenger trains. It was painted red, with the cab area above bonnet-level height painted cream.

Visually similar to their Class 17 Type 1 product, though longer, and with the radiator grilles in the ends of the engine covers rather than the sides. The locomotive saw little service, mainly around the International Combustion works in Derby. The locomotive was broken up by Clayton's in April 1967.

Related Research Articles

<span class="mw-page-title-main">Diesel engine</span> Type of internal combustion engine

The diesel engine, named after Rudolf Diesel, is an internal combustion engine in which ignition of the fuel is caused by the elevated temperature of the air in the cylinder due to mechanical compression; thus, the diesel engine is a so-called compression-ignition engine. This contrasts with engines using spark plug-ignition of the air-fuel mixture, such as a petrol engine or a gas engine.

<span class="mw-page-title-main">Locomotive</span> Self-propelled railway vehicle

A locomotive or engine is a rail transport vehicle that provides the motive power for a train. If a locomotive is capable of carrying a payload, it is usually rather referred to as a multiple unit, motor coach, railcar or power car; the use of these self-propelled vehicles is increasingly common for passenger trains, but rare for freight.

<span class="mw-page-title-main">Diesel locomotive</span> Locomotive powered by a diesel engine

A diesel locomotive is a type of railway locomotive in which the prime mover is a diesel engine. Several types of diesel locomotives have been developed, differing mainly in the means by which mechanical power is conveyed to the driving wheels.

<span class="mw-page-title-main">British Rail Class 15</span> Diesel Electric locomotive designed by British Thompson-Houston

The British Rail Class 15 diesel locomotives, also known as the BTH Type 1, were designed by British Thomson-Houston, and built by the Yorkshire Engine Company and the Clayton Equipment Company, between 1957 and 1961. They were numbered D8200-D8243.

<span class="mw-page-title-main">Lima Locomotive Works</span> Defunct locomotive manufacturer

Lima Locomotive Works was an American firm that manufactured railroad locomotives from the 1870s through the 1950s. The company took the most distinctive part of its name from its main shop's location in Lima, Ohio. The shops were located between the Erie Railroad main line, the Baltimore & Ohio's Cincinnati-Toledo main line and the Nickel Plate Road main line and shops.

<span class="mw-page-title-main">British Railways DP1</span> British prototype diesel engine

English Electric DP1, commonly known as Deltic, is a prototype 3,300 hp (2,500 kW) demonstrator locomotive employing two Napier Deltic engines, built by English Electric in 1955.

<span class="mw-page-title-main">British Rail 18000</span>

British Rail 18000 was a prototype mainline gas turbine-electric locomotive built for British Railways in 1949 by Brown, Boveri & Cie. An earlier gas-turbine locomotive, 18100, had been ordered from Metropolitan-Vickers by the Great Western Railway but construction was delayed due to World War II; a second, 18000, was thus ordered from Switzerland in 1946. It spent its working life on the Western Region of British Railways, operating express passenger services from Paddington station, London.

<span class="mw-page-title-main">Ruston & Hornsby</span> Defunct British industrial equipment manufacturer

Ruston & Hornsby was an industrial equipment manufacturer in Lincoln, England founded in 1918. The company is best known as a manufacturer of narrow and standard gauge diesel locomotives and also of steam shovels. Other products included cars, steam locomotives and a range of internal combustion engines, and later gas turbines. It is now a subsidiary of Siemens.

<span class="mw-page-title-main">Gas turbine locomotive</span> Type of railway locomotive

A gas turbine locomotive is a type of railway locomotive in which the prime mover is a gas turbine. Several types of gas turbine locomotive have been developed, differing mainly in the means by which mechanical power is conveyed to the driving wheels (drivers). A gas turbine train typically consists of two power cars, and one or more intermediate passenger cars.

<span class="mw-page-title-main">British Rail Class 17</span>

The British Rail Class 17 was a class of 117 Bo-Bo diesel-electric locomotives built 1962–1965 by Clayton Equipment Company and their sub-contractor Beyer, Peacock & Co., on behalf of British Railways (BR).

British Rail 18100 was a prototype main line gas turbine-electric locomotive built for British Railways in 1951 by Metropolitan-Vickers, Manchester. It had, however, been ordered by the Great Western Railway in the 1940s, but construction was delayed due to World War II. It spent its working life on the Western Region of British Railways, operating express passenger services from Paddington station, London.

<span class="mw-page-title-main">PKP class SM42</span> Polish diesel locomotive class

SM42 is the PKP class for a Polish shunter diesel locomotive for shunting and light freight traffic, built by Fablok in Chrzanów.

<span class="mw-page-title-main">Clayton Equipment Company</span>

Clayton Equipment Company Ltd, now known simply as Clayton Equipment Ltd or CEC and CEL, is a locomotive construction company that specialises in rail equipment, design and build, tunnelling, mining, metro, mainline and shunter locomotives.

<span class="mw-page-title-main">Steam generator (railroad)</span>

A steam generator is a type of boiler used to produce steam for climate control and potable water heating in railroad passenger cars. The output of a railroad steam generator is low pressure, saturated steam that is passed through a system of pipes and conduits throughout the length of the train.

<span class="mw-page-title-main">Turbo-diesel</span> Diesel engine with a turbocharger

The term turbo-diesel, also written as turbodiesel and turbo diesel, refers to any diesel engine equipped with a turbocharger. As with other engine types, turbocharging a diesel engine can significantly increase its efficiency and power output, especially when used in combination with an intercooler.

A steam diesel hybrid locomotive is a railway locomotive with a piston engine which could run on either steam from a boiler or diesel fuel. Examples were built in the United Kingdom, Soviet Union and Italy but the relatively high cost of fuel oil, or failure to resolve problems caused by technical complexity, meant that the designs were not pursued.

<span class="mw-page-title-main">China Railway DF4</span> Chinese diesel-electric locomotive class

The DF4 is a type of diesel-electric locomotive used in the People's Republic of China. It has been in production since 1969 and is still produced as of 2007 by several local companies. It is the most common locomotive in China and is used for both passenger and freight services.

<span class="mw-page-title-main">China Railways QJ</span>

The QJ was a type of heavy freight steam locomotive introduced in 1956 by the China Railway. The majority were built by Datong Locomotive Factory. The prototypes and early production of the class were designated HP, being redesignated as FD class during the Cultural Revolution, before becoming the QJ class in 1971.

<span class="mw-page-title-main">South African Class 26 4-8-4</span> 4–8-4 steam locomotive

The South African Railways Class 26 4-8-4 of 1981, popularly known as the Red Devil, is a 4-8-4 steam locomotive which was rebuilt from a Class 25NC locomotive by mechanical engineer David Wardale from England while in the employ of the South African Railways. The rebuilding took place at the Salt River Works in Cape Town and was based on the principles developed by Argentinian mechanical engineer L.D. Porta.

<span class="mw-page-title-main">WLs40/50</span>

The WLs40 and WLs50 are narrow gauge diesel locomotives built in Poland, used mostly on industrial railways. A small number was used by Polish State Railways (PKP) as Ld1 class on narrow gauge railways in Poland.