British Rail Class 53 (Falcon) | |||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||
|
D0280 Falcon was a single prototype diesel-electric locomotive, built for British Railways in 1961. It was one of a series of three prototypes: Falcon, DP2 and Lion, eventually leading to the Class 47 and Class 50. [1] A requirement was expressed by the BTC at a meeting on 15 January 1960 for new Type 4 designs of Co-Co arrangement, which would be lighter than the earlier 1Co-Co1 locomotives such as the Peak classes, produced under the Pilot Scheme.
Brush had a licence to build the Maybach MD655 engine, as already used in the Western region diesel-hydraulics, although their licence limited them to diesel-electric locomotives. [2] These engines were of lower weight than their competitors, which led Brush to consider using a pair of them, like the Western hydraulics. Design work began in 1959 under contract Nº 04/20600, before the BTC requirement had been issued. [3]
British Rail later assigned Class 53 [4] [5] [6] and the running number 1200. While not in any sense a failure, the design was the victim of advances in locomotive technology (specifically, the power obtainable from single medium-speed diesel engines) and was never duplicated.
The Falcon project began in 1959 to design a new, lightweight diesel-electric Type 4 locomotive to meet a British Railways' requirement for second generation Type 4 diesel locomotives. No single lightweight diesel engine was powerful enough, so the Falcon project used twin German-designed Maybach MD655 engines like those in the Class 52 Western diesel-hydraulic locomotives of the Western Region. These drove Brush generators and traction motors, rather than the hydraulic transmission of the Westerns. The engines of the Warships and Westerns were built under licence by Bristol Siddeley, part of Hawker Siddeley, who then purchased Brush Traction in 1957, making the licensed engines available to Brush. [7]
The prototype, wearing a livery of lime green and chestnut brown and bearing the number D0280 after its Brush project number 280, emerged from Brush's Loughborough works in September 1961. Initial testing took place on the Eastern Region, based at Finsbury Park, and the London Midland Region. Subsequently, the locomotive was transferred to the Western Region for power-unit performance testing, where it was tested up the Lickey Incline on 6 February 1962. [8] Returning to Brush in March 1962, it received cast Falcon nameplates during an overhaul and upgrade lasting over a year.
Returning to British Railways in 1963, Falcon spent six months working out of Darnall shed, Sheffield, on passenger and freight trains, after which its testing was completed. Another year out of service followed, the locomotive returning in British Railways in two-tone green with half yellow ends and intended for active service. There was, by then, no chance of Falcon being the forerunner of a line of production locomotives. Advances in diesel engine technology made it obsolete almost from the beginning, with the development of larger and comparatively lightweight single powerplants. Brush Traction's own single-engined Type 4 design, which became the BR Class 47, was the successful contender, with 512 locomotives eventually produced. Falcon was an evolutionary dead end - it was a functional locomotive, worth keeping in service, but there were never going to be more.
From 1965 onwards the locomotive, still owned by Brush, was under contract with British Railways so that operation and repair would be handled by them, with only major repairs being handed back to the builder. Allocated to Bristol Bath Road alongside the Class 52 Western fleet, the locomotive worked Paddington-Bristol diagrams with them. [9] In 1970, British Rail bought the locomotive from Brush at its scrap value. BREL Swindon rebuilt it; air braking replaced vacuum braking, and it was repainted in corporate Rail Blue with full yellow ends with the new number 1200. [10] Falcon was first allocated to Bristol Bath Road again working alongside Class 52s, and by March 1974 to Ebbw Junction, [11] [12] for use on iron ore trains. During its time at Ebbw Junction, the steam heating boiler was isolated.
In 1975, the locomotive was deemed uneconomic to operate due to its non-standard status and, despite efforts to preserve it, Falcon was broken up in March–April 1976 at Cashmore's of Newport. [11]
In late 2007, Heljan introduced DCC-ready OO gauge models of Falcon in lime green, BR green and BR blue liveries, with a total production run of 2,400 items. [13]
The British Rail Class 52 is a class of 74 Type 4 diesel-hydraulic locomotives built for the Western Region of British Railways between 1961 and 1964. All were given two-word names, the first word being "Western" and thus the type became known as Westerns. They were also known as Wizzos and Thousands. The final Class 52 locomotives were withdrawn from service in 1977.
The British Rail Class 05 is a class of 0-6-0 diesel-mechanical shunters built by Hunslet Engine Company from 1955 to 1961. They were used on the Eastern and Scottish Regions of British Railways. The first two batches were delivered as 11136-11143 and 11161-11176. Subsequent locomotives were delivered, new, as D2574-D2618.
The British Rail Class 15 diesel locomotives, also known as the BTH Type 1, were designed by British Thomson-Houston, and built by the Yorkshire Engine Company and the Clayton Equipment Company, between 1957 and 1961. They were numbered D8200-D8243.
The British Rail Class 16 also known as the North British Type 1 was a type of diesel locomotive designed and manufactured by the North British Locomotive Company. A total of ten were produced, these being numbered D8400-D8409.
The British Rail Class 47 or Brush Type 4 is a class of diesel-electric locomotive that was developed in the 1960s by Brush Traction. A total of 512 Class 47s were built at Brush's Falcon Works in Loughborough and at British Railways' Crewe Works between 1962 and 1968, which made them the most numerous class of British mainline diesel locomotive.
The British Rail Class 31 diesel locomotives, also known as the Brush Type 2 and previously as Class 30, were built by Brush Traction from 1957 to 1962. They were numbered in two series, D5500-D5699 and D5800-D5862. Construction of the first locomotive was completed in the final week of September 1957, and the handing-over took place on 31 October. The first Class 31 entered service in November 1957, after the launch of the Class 20 locomotive and was one of the Pilot Scheme locomotives ordered by British Railways to replace steam traction.
The British Rail Class 26 diesel locomotives, also known as the BRCW Type 2, were built by the Birmingham Railway Carriage and Wagon Company (BRCW) at Smethwick in 1958–59. Forty seven examples were built, and the last were withdrawn from service in 1994. Like their higher-powered sisters, the BRCW Classes 27 and 33, they had all-steel bodies and cab ends with fibreglass cab roofs. They were numbered D5300-D5346.
D0260, named Lion, was a prototype Type 4 mainline diesel-electric locomotive built in 1962 by a consortium of Birmingham Railway Carriage and Wagon Company, Sulzer the engine maker and Associated Electrical Industries, at BRCW's Smethwick works near Birmingham.
DP2, meaning Development Prototype number 2, was a prototype Type 4 mainline diesel locomotive, built by English Electric in 1962. DP2 was effectively the prototype for the later Class 50; it trialled the engine and electronic systems later used in that class of locomotives.
The British Rail Class 50 is a class of diesel locomotives designed to haul express passenger trains at 100 mph (160 km/h). Built by English Electric at the Vulcan Foundry in Newton-le-Willows between 1967 and 1968, the Class 50s were initially on a 10-year lease from English Electric Leasing, and were employed hauling express passenger trains on the then non-electrified section of the West Coast Main Line between Crewe and Scotland. Initially numbered D400–D449 and known as English Electric Type 4s, the locomotives were purchased outright by British Rail (BR) at the end of the lease and became Class 50 in the TOPS renumbering of 1973.
The British Rail Class 28 diesel-electric locomotives, known variously as 'Metrovicks', 'Crossleys' or 'Co-Bos', were built under the Pilot Scheme for diesel locomotives as part of the British Railways 1955 Modernisation Plan.
The British Rail Class 43 diesel-hydraulic locomotives were built by the North British Locomotive Company (NBL) from 1960 to 1962. They were numbered D833–D865.
The British Rail Class 17 was a class of 117 Bo-Bo diesel-electric locomotives built 1962–1965 by Clayton Equipment Company and their sub-contractor Beyer, Peacock & Co., on behalf of British Railways (BR).
The British Rail Class 25, also known as the Sulzer Type 2, is a class of 327 diesel locomotives built between 1961 and 1967 for British Rail. They were numbered in two series, D5151–D5299 and D7500–D7677.
The British Rail Class 35 is a class of mixed-traffic B-B diesel locomotive with hydraulic transmission. Because of their Mekydro-design hydraulic transmission units, the locomotives became known as the Hymeks. They were numbered D7000-D7100.
The British Rail Class 21 was a type of Type 2 diesel-electric locomotive built by the North British Locomotive Company in Glasgow for British Rail in 1958–1960. They were numbered D6100-D6157. Thirty-eight of the locomotives were withdrawn by August 1968; the rest were rebuilt with bigger engines to become Class 29, although those locos only lasted until 1971.
The British Rail Class 22 or "Baby Warship" was a class of diesel-hydraulic locomotives designed for the Western Region of British Railways and built by the North British Locomotive Company. They were very similar in appearance to the Class 21 diesel-electrics, although shorter in length by almost five feet. The nickname Baby Warship related to the similarity in appearance to the British Rail Class D20/2 or Class 41 Warship Class. The Class 22s were numbered D6300-D6357.
Co-Co is the wheel arrangement for diesel and electric locomotives with two six-wheeled bogies with all axles powered, with a separate traction motor per axle. The equivalent UIC classification (Europe) for this arrangement is Co′Co′, or C-C for AAR.
British Railways Class D16/2 was a class of prototype diesel locomotives built by British Railways at Ashford Works and introduced in 1950–1951, with a third example being introduced in 1954. They had been designed by Oliver Bulleid for the Southern Railway and were authorised in February 1947 but did not appear until after nationalisation. The diesel engine and transmission were supplied by English Electric, but the Bulleid influence was obvious. The box-like body style closely resembled Bulleid's electric locomotives and was quite different from the usual English Electric style, typified by British Rail Class D16/1 which in turn was strongly influenced by contemporary American design.
British Railways 10800 was a diesel locomotive built by the North British Locomotive Company for British Railways in 1950. It had been ordered by the London, Midland and Scottish Railway in 1946 but did not appear until after the 1948 nationalisation of the railways.
{{cite book}}
: |work=
ignored (help)