British Rail Class 16

Last updated

NBL Type 1
British Rail Class 16
North British Type 1 D8403 (8314604715).jpg
No. D8403 in green livery with all-yellow front end at Stratford MPD in 1966
Type and origin
Power typeDiesel-electric
Builder North British Locomotive Company
Serial number27671–27680
Build date1958
Total produced10
Specifications
Configuration:
   UIC Bo′Bo′
  Commonwealth Bo-Bo
Gauge 4 ft 8+12 in (1,435 mm) standard gauge
Wheel diameter3 ft 7 in (1.092 m)
Minimum curve 3.5 chains (70.41 m)
Wheelbase 28 ft 6 in (8.69 m)
Length42 ft 6 in (12.95 m)
Width8 ft 8+12 in (2.654 m)
Height12 ft 8 in (3.861 m)
Loco weight68 long tons (69 t; 76 short tons)
Fuel capacity400 imp gal (1,800 L; 480 US gal)
Prime mover Paxman 16YHXL
Displacement78.4 L (4,780 cu in)
Generator GEC WT 881 (plus GEC auxiliary generator
Traction motors 4 x GEC WT 441, nose suspended, with single reduction gear drive
Cylinders 16
Cylinder size 7 in (178 mm) bore
7+34 in (197 mm) stroke
Transmission Diesel electric
MU working Red Circle
Train heatingNone; through steam pipe
Train brakes Vacuum
Performance figures
Maximum speed60 mph (97 km/h)
Power outputEngine: 800  hp (597 kW)
At rail: 627 hp (468 kW)
Tractive effort Maximum: 42,000  lbf (186.8 kN)
Brakeforce31 long tons-force (310 kN)
Career
Operators British Rail
NumbersD8400–D8409
Axle load class Route availability 4
Retired1968
DispositionAll scrapped

The British Rail Class 16 also known as the North British Type 1 was a type of diesel locomotive designed and manufactured by the North British Locomotive Company. A total of ten were produced, these being numbered D8400-D8409. [1]

Contents

The type was ordered by British Railways (BR) as an element of the 1955 Modernisation Plan. The design was largely derived from North British's earlier prototype locomotive, designated No. 10800, produced during the late 1940s; it also incorporated several engineering approaches common to steam locomotives, the company allegedly having difficulty transitioning to the new traction format. Akin to several other Type 1 designs, they were relatively compact locomotives that were intended primarily for local freight traffic. The performance of the type was found to be lacking in comparison with its peers, thus the potential for follow-on orders evaporated and no further examples were constructed beyond the original batch. The Class 16 shared numerous design features with those used on subsequent locomotives by the company, particularly the British Rail Class 21 locomotive.

Background

In less than a decade following the formation of British Railways (BR), substantial changes were being made. Under the 1955 Modernisation Plan, a long-term strategy of replacing steam locomotives with a combination of diesel locomotives and electric locomotives was adopted, with the former being largely intended as an interim measure for most areas ahead of widespread electrification of trunk routes. There was also a strong political desire to support British manufacturers in transitioning towards the design and production of these favoured forms of traction. Due to a lack of expertise, this often involved the pairing of traditional locomotive manufacturers with various firms within the electrical sector, even though the latter typically had very limited experience of the railways. [2]

In accordance with these policies, BR ramped up its efforts to convert its fleet, placing numerous orders within a short timeframe for diesel locomotives to several different specifications with various manufacturers. On 16 November 1955, a small order for ten Type 1 freight locomotives was placed with the North British Locomotive Company. [3] Under BR's 'pilot scheme', such batches were intended for evaluation purposes under competitive conditions against rival designs in which the better models would receive follow-on orders. [3] In the Class 16's case, this included the British Thomson-Houston Class 15 and English Electric Class 20

Construction

Distribution of locomotives,
October 1967 [4]
England south location map.svg
Blue 00ffff pog.svg
30A
CodeNameQuantity
30A Stratford 10
Total:10
British Railways (BR) 10800 ordered previously in 1946 for London Midland & Scottish Railway (LMSR). North British Locomotive Company Glasgow (NBL) L977, British Railways (BR) 10800 (Ans 05373-2995).jpg
British Railways (BR) 10800 ordered previously in 1946 for London Midland & Scottish Railway (LMSR).

The design drew heavily upon North British's earlier prototype locomotive, designated No. 10800, which had been developed between 1947 and 1950. Having been ordered originally by the London, Midland and Scottish Railway prior to its absorption into BR, No. 10800 was designed for use on branch and secondary lines; according to railway historian Rodger Bradley, this early British diesel locomotive functioned not only as the direct predecessor of the Class 16, but can be more broadly considered to be the forerunner of all BR designs orientated towards this type of work up until the 1980s. [3]

The design also shared some similarities with the contemporary British Rail Class 15; both locomotives adopted the road-switcher layout that had been rapidly becoming the standard approach on the railways of both North America and Australia at the time; they were also both powered by an 800 hp (600 kW) Paxman 16YHXL prime mover. [2] [3] However, the North British design suffered a major setback as a result of external policy decisions; while the company had decided to approach the new era of diesel traction by specialising in hydraulic transmissions in partnership with the West German industrial interest Voith, BR planners had decided to favour electric transmissions instead, putting the firm at a competitive disadvantage to those locomotive builders that had opted for this transmission system. [3]

The locomotive's construction was based on fabricated mainframes that ran the entire length of the locomotive; this practice was inline with traditional steam locomotive designs. [3] According to Bradley, North British found it difficult to translate their steam engineering skills to the newer diesel and electric traction designs. [3] The mainframes were carried on a pair of four‑wheeled bogies and supported the single drivers cab and the superstructure in which the engine and other apparatus was accommodated within. Both the electro‑pneumatic control system and traction motors of the Class 16 were identical to those used on the subsequent British Rail Class 21 locomotive, albeit with the traction motors being downrated to 152 hp and 420 rpm. [3] As they were intended exclusively for hauling freight trains, they were not equipped with train heating boilers. [3]

The original delivery schedule agreed between North British and BR called for the delivery of the first locomotive to occur 21 months from the date of settlement of technical details, resulting in an intended delivery date of August 1957. However, there was considerable complications encountered during the type's construction, which has been typically viewed as not unexpected in light of a general lack of experience with mainline diesel traction on Britain's railways, and as such did not come as a surprise to many officials at the time. The first Class 16 locomotives did not emerge from North British's Queen's Park Works in Glasgow until the summer of 1958, roughly one year behind schedule.

Operation

Upon their completion, all ten Class 16 locomotives (numbered D8400–D8409) were delivered to Devons Road depot, Bow, North-east London on the London Midland Region of British Railways between May and September 1958. There, the type underwent evaluation against the rival designs, but were promptly relocated to nearby Stratford depot on the Eastern Region, where they remained for the rest of their operating lives. [3] The allocation of all ten locomotives in October 1967 was Stratford. [5]

The results of the evaluation were not positive for the type, thus no further Class 16s were ever produced. While the Class 15s also suffered problems with the Paxman engines, these were worse on Class 16 because inadequate ventilation resulted in frequent engine seizures. [3] Another problem was coolant contamination of the oil, due to cylinder head failure[ clarification needed ]. They were fitted with a non-standard type of electro-mechanical control equipment (coded "red circle" by BR) which was prone to failure, and they could not operate in multiple with locomotives fitted with the more common electro-pneumatic ("blue star") controls. [3]

Withdrawal

Being both non-standard and fairly unreliable, the locomotives were an obvious candidate for early withdrawal despite barely being ten years old as BR planners were coming to this conclusion. [3] Accordingly, they were all withdrawn between February and September 1968; all ten Class 16s had been cut up for scrap by the end of 1969.

Related Research Articles

<span class="mw-page-title-main">British Rail Class 53</span> Class of diesel electric locomotives

D0280 Falcon was a single prototype diesel-electric locomotive, built for British Railways in 1961. It was one of a series of three prototypes: Falcon, DP2 and Lion, eventually leading to the Class 47 and Class 50. A requirement was expressed by the BTC at a meeting on 15 January 1960 for new Type 4 designs of Co-Co arrangement, which would be lighter than the earlier 1Co-Co1 locomotives such as the Peak classes, produced under the Pilot Scheme.

<span class="mw-page-title-main">British Rail Class 52</span> Class of 74 C-C diesel-hydraulic locomotives

The British Rail Class 52 is a class of 74 Type 4 diesel-hydraulic locomotives built for the Western Region of British Railways between 1961 and 1964. All were given two-word names, the first word being "Western" and thus the type became known as Westerns. They were also known as Wizzos and Thousands. The final Class 52 locomotives were withdrawn from service in 1977.

<span class="mw-page-title-main">British Rail Class 15</span> Diesel Electric locomotive designed by British Thompson-Houston

The British Rail Class 15 diesel locomotives, also known as the BTH Type 1, were designed by British Thomson-Houston, and built by the Yorkshire Engine Company and the Clayton Equipment Company, between 1957 and 1961. They were numbered D8200-D8243.

<span class="mw-page-title-main">British Rail Class 24</span> Diesel-electric railway locomotive used in Great Britain

The British Railways Class 24 diesel locomotives, also known as the Sulzer Type 2, were built from 1958 to 1961. One hundred and fifty-one were built at Derby, Crewe and Darlington, the first twenty of them as part of the British Railways 1955 Modernisation Plan. This class was used as the basis for the development of the Class 25 locomotives.

<span class="mw-page-title-main">British Rail Class 26</span> Class of 47 Bo′Bo′ 1160hp diesel-electric locomotives

The British Rail Class 26 diesel locomotives, also known as the BRCW Type 2, were built by the Birmingham Railway Carriage and Wagon Company (BRCW) at Smethwick in 1958–59. Forty seven examples were built, and the last were withdrawn from service in 1994. Like their higher-powered sisters, the BRCW Classes 27 and 33, they had all-steel bodies and cab ends with fibreglass cab roofs. They were numbered D5300-D5346.

<span class="mw-page-title-main">British Rail Class 44</span> Class of (1Co)(Co1) 2300hp diesel-electric locomotives

The British Rail Class 44 or Sulzer Type 4 diesel locomotives were built by British Railways' Derby Works between 1959 and 1960, intended for express passenger services. They were originally numbered D1-D10 and named after mountains in England and Wales, and, along with the similar Class 45 and 46 locomotives, they became known as Peaks.

<span class="mw-page-title-main">British Rail Class 28</span> Class of diesel electric locomotives built by Metropolitan Vickers

The British Rail Class 28 diesel-electric locomotives, known variously as 'Metrovicks', 'Crossleys' or 'Co-Bos', were built under the Pilot Scheme for diesel locomotives as part of the British Railways 1955 Modernisation Plan.

<span class="mw-page-title-main">British Rail Class 17</span>

The British Rail Class 17 was a class of 117 Bo-Bo diesel-electric locomotives built 1962–1965 by Clayton Equipment Company and their sub-contractor Beyer, Peacock & Co., on behalf of British Railways (BR).

<span class="mw-page-title-main">British Rail Class 25</span> Diesel-electric railway locomotive used in Great Britain

The British Rail Class 25, also known as the Sulzer Type 2, is a class of 327 diesel locomotives built between 1961 and 1967 for British Rail. They were numbered in two series, D5151–D5299 and D7500–D7677.

<span class="mw-page-title-main">British Rail Class 35</span> Class of diesel-hydraulic locomotives

The British Rail Class 35 is a class of mixed-traffic B-B diesel locomotive with hydraulic transmission. Because of their Mekydro-design hydraulic transmission units, the locomotives became known as the Hymeks. They were numbered D7000-D7100.

<span class="mw-page-title-main">British Rail Class 21 (NBL)</span>

The British Rail Class 21 was a type of Type 2 diesel-electric locomotive built by the North British Locomotive Company in Glasgow for British Rail in 1958–1960. They were numbered D6100-D6157. Thirty-eight of the locomotives were withdrawn by August 1968; the rest were rebuilt with bigger engines to become Class 29, although those locos only lasted until 1971.

<span class="mw-page-title-main">British Rail Class 22</span>

The British Rail Class 22 or "Baby Warship" was a class of diesel-hydraulic locomotives designed for the Western Region of British Railways and built by the North British Locomotive Company. They were very similar in appearance to the Class 21 diesel-electrics. The nickname Baby Warship related to the similarity in appearance to the British Rail Class D20/2 or Class 41 Warship Class. The Class 22s were numbered D6300-D6357.

<span class="mw-page-title-main">Co-Co locomotive</span> Locomotive wheel arrangement

Co-Co is the wheel arrangement for diesel and electric locomotives with two six-wheeled bogies with all axles powered, with a separate traction motor per axle. The equivalent UIC classification (Europe) for this arrangement is Co′Co′, or C-C for AAR.

<span class="mw-page-title-main">British Rail Class 23</span> Class of diesel-electric locomotives

The British Rail Class 23 were a class of ten Bo-Bo diesel-electric locomotives built by the English Electric Company (EE) in 1959. The power unit used was a Napier Deltic T9-29 9-cylinder engine of 1,100 bhp (820 kW) driving an EE generator, which powered the four traction motors. They were numbered from D5900 to D5909.

<span class="mw-page-title-main">British Rail Class 27</span>

British Rail's Class 27 comprised 69 diesel locomotives built by the Birmingham Railway Carriage and Wagon Company (BRCW) during 1961 and 1962. They were a development of the earlier Class 26; both were originally classified as the BRCW Type 2. The Class 27s were numbered D5347-D5415.

<span class="mw-page-title-main">British Rail Class 29</span>

The British Rail Class 29 were a class of 20 diesel-electric Bo-Bo locomotives produced by the re-engining of the NBL Type 2 units. The units were designed for both passenger and freight trains.

<span class="mw-page-title-main">British Rail 10800</span> British diesel locomotive

British Railways 10800 was a diesel locomotive built by the North British Locomotive Company for British Railways in 1950. It had been ordered by the London, Midland and Scottish Railway in 1946 but did not appear until after the 1948 nationalisation of the railways.

<span class="mw-page-title-main">Neville Hill TMD</span> Train Maintenance Depot in West Yorkshire, England

Neville Hill is a railway train maintenance depot in Osmondthorpe, Leeds, England on the Leeds to Selby Line. The depot is situated 2 miles 14 chains (3.5 km) to the east of Leeds railway station on the north side of the line.

<span class="mw-page-title-main">Landore TMD</span>

Landore TMD is a railway traction maintenance depot situated in Landore, a district of Swansea, Wales. There was a shed for steam locomotives here, and in 1963 British Rail opened a purpose-build diesel depot. Under privatisation the depot was operated by Great Western Railway to service its fleet of InterCity 125s until it closed in December 2018. The site reopened in September 2019 as a rolling stock refurbishment centre.

<span class="mw-page-title-main">Holbeck TMD</span> Railway maintenance depot in Holbeck, Leeds

Holbeck TMD is a traction maintenance depot located in Holbeck, Leeds, England. The depot is located on the west side of the line from Woodlesford, and is 57 chains (1.1 km) south of Leeds railway station.

References

Citations

  1. "NBL Ltd 16 Bo-Bo". brdatabase.info. Retrieved 7 December 2020.
  2. 1 2 Bradley, Rodger. "BTH Type 1 Bo-Bo – Happy 60th Birthday". twsmedia.co.uk. Archived from the original on 2 December 2020. Retrieved 7 December 2020.
  3. 1 2 3 4 5 6 7 8 9 10 11 12 13 Bradley, Rodger. "The Last North British Type 1 Diesel". twsmedia.co.uk. Archived from the original on 2 December 2020. Retrieved 7 December 2020.
  4. British Rail Locoshed Book. Shepperton: Ian Allan. February 1968. p. 31. ISBN   0-7110-0004-2.
  5. British Rail Locoshed Book. Shepperton: Ian Allan. February 1968. p. 32. ISBN   0-7110-0004-2.

Sources

Further reading