USCGC Anacapa

Last updated
USCGC Anacapa (WPB-1335).jpg
Anacapa in Glacier Bay, Alaska
History
Flag of the United States Coast Guard.svgUnited States
NameUSCGC Anacapa
Namesake Anacapa Island, California
LaunchedSeptember 8, 1989
CommissionedJanuary 13, 1990
DecommissionedApril 26, 2024
Homeport Petersburg, Alaska
Identification
StatusDecommissioned
General characteristics
Class and type Island-class cutter
Displacement155 tons
Length110 ft (34 m)
Beam21 ft (6.4 m)
Draft7 ft (2.1 m)
PropulsionTwin Paxman Valenta 16-CM RP-200M
Speed29.6 knots
Range3,380 miles
Endurance5 days
Complement2 officers, 14 enlisted
Armament

USCGC Anacapa (WPB-1335) is a decommissioned Island-class cutter of the United States Coast Guard. She was based at Petersburg, Alaska and Port Angeles, Washington and was responsible for law enforcement, search and rescue, and maritime defense.

Contents

Design and characteristics

The Island-class patrol boats, including Anacapa, were constructed in Bollinger Shipyards in Lockport, Louisiana. Their design is based on the British Vosper Thornycroft 33 metres (108 ft) patrol boats and have similar dimensions. [1] Anacapa has an overall length of 110 feet (34 m), a beam of 21 feet (6.4 m), and a draft of 7 feet (2.1 m) at full load. The patrol boat has a displacement of 155 tons at full load and 138 tons at half load. Anacapa was launched on September 8, 1989. [2] She was the 35th Island-class vessel completed. [3]

The Coast Guard purchased 49 Island-class cutters, and over the course of their construction made several modifications. The ships are grouped into A, B, and C classes depending on their design. Anacapa is a B-class ship and thus has heavier bow plating to prevent hull cracking in heavy seas, among other enhancements. [4]

Anacapa is powered by two Paxman Valenta 16 CM Diesel engines which drive two 5-blade propellers. She has two 99 kilowatts (135 PS; 133 shp) Caterpillar 3304T diesel generators for electrical power. Her hull is constructed of high-strength steel, and her superstructure and main deck are constructed of aluminium. [5] Stern flaps were retrofitted to reduce hull friction, and increase speed and full efficiency. [4] Anacapa has active fin stabilizers to improve her seakeeping characteristics. [5]

The Island-class patrol boats have maximum sustained speeds of 29.6 knots (54.8 km/h; 34.1 mph). They are fitted with one 25mm machine gun and two Browning .50 Caliber Machine Gun. They are equipped with satellite navigation systems, collision avoidance systems, and surface radar. They have a range of 3,380 miles (2,940 nmi; 5,440 km) at 8 knots, and an at-sea endurance of five days. [5] [6] [4]

Anacapa carries one 18-foot rigid hull inflatable boat with seating for 8 crew. [7]

Anacapa's complement is 2 officers and 14 enlisted crew. [8]

Anacapa's namesake is Anacapa Island, one of the Channel Islands off the Southern California coast.

Operational history

USCGC Anacapa directs streams of water into the Japanese derelict Ryou-Un Maru to sink it after shelling it. Holes from the Mk 38 25 mm chain gun are clearly visible on the bow of the derelict. 120405-G-RS249-005-USCG responds to Japanese vessel in Gulf of Alaska.jpg
USCGC Anacapa directs streams of water into the Japanese derelict Ryou-Un Maru to sink it after shelling it. Holes from the Mk 38 25 mm chain gun are clearly visible on the bow of the derelict.

Petersburg

The Anacapa was homeported in Petersburg, Alaska for most of her career. She was commissioned there on January 13, 1990. She replaced USCGC Cape Hatteras at that station. Anacapa's primary missions were law enforcement, including safety and fisheries laws, search and rescue, and maritime defense operations. [3] The ship's law enforcement duties included policing the international border with Canada. The United States and Canada disagree on the location of the maritime border in Dixon Entrance. This led to a series of seizures of Canadian fishing boats by Anacapa in the disputed waters. Western Eagle was fishing 300 yards into U.S. waters when she was seized on July 15, 1991. [9] The troller Barbarella was seized 800 yards north of the border claimed by the U.S. on July 14, 1991. [10] A 1990 agreement between the two countries reduced fishing conflicts when it became effective in 1992. [11] Nonetheless, patrols of the disputed waters continued and on June 22, 1995 Anacapa seized the Canadian fishing vessel Chi Dona 300 yards north of the border. [12]

Anacapa also enforced fishing, safety, and other regulations on U.S.-flagged vessels. On August 11, 1993 a boarding party from Anacapa removed 15 illegal immigrants working aboard the fish processing ship Ocean Pride. [13] She conducted routine safety inspections of vessels in her patrol area. In the summer of 2018, for instance, Anacapa's boardings found three vessels in violation of various regulations. [14]

Anacapa's search and rescue missions frequently involved the sizable local fishing fleet. For example, on May 8, 1992 Anacapa towed the fishing vessel Justy back to Petersburg with a malfunctioning propeller shaft. The next day she towed the disabled fishing vessel Sirius to Petersburg with a bad oil pump. [15] In July 1996 Anacapa rescued the four-man crew of the capsized fishing vessel Baranof Queen. [16] While assisting the local fishing fleet may have been the norm, Anacapa participated in a wide range of search and rescue missions. For example, on January 20, 1990, a week after her commissioning, Anacapa responded when the Canadian tanker Frank H. Brown went aground in Wrangell Narrows and spilled 57,600 gallons of gasoline into the waterway. [17]

USCGC Anacapa in 2011 USCGC Anacapa.jpg
USCGC Anacapa in 2011

In December 2008 Anacapa sailed to the Coast Guard Yard in Curtis Bay, Maryland for a major renovation under the Mission Effectiveness Program. [18] The renovation was intended to extend the service life of the cutter. Significant portions of corroded hull plating, air-conditioning, water makers, and fire systems were replaced, and a number of major systems, including main engine control, were upgraded. The cost of the upgrade was between $7 and $9 million. [19] [20]

On May 31, 2011, Lieutenant Matthias Wholley was relieved of command of the Anacapa six weeks ahead of schedule. [21] On June 30, 2011, the Coast Guard announced that an investigation had confirmed Wholley had been intoxicated while on duty. Wholley received a letter of reprimand, 60-day restriction, and forfeiture of half months pay for two months. [22]

On April 5, 2012 the Anacapa intercepted the derelict 165-foot (50 m) Japanese squid fishing boat Ryou-Un Maru in the Gulf of Alaska 180 miles (290 km) off the coast of Southeast Alaska. It had been washed away from its mooring in Aomori Prefecture, Japan by the March 2011 Tōhoku earthquake and tsunami, and had drifted unmanned for more than a year across the Pacific Ocean. The Coast Guard concluded that it was safer to sink it deep water rather than let it continue to drift and possibly become a hazard to navigation or the environment. The Anacapa fired on the ghost ship with her Mk 38 25mm autocannon, holing it and eventually sinking it with fire hoses in approximately 1,800-metre (6,000 ft) of water. [23]

Port Angeles

Anacapa left Petersburg for the last time on May 5, 2022. After a shipyard repair period in Ketchikan, [24] she sailed to Port Angeles, Washington to replace her sister ship USCGC Cuttyhunk, which had suffered irreparable hull damage. Anacapa was re-engined with Cuttyhunk's recently overhauled motors at that time. [25]

In August 2022, Anacapa rescued three people from a disabled sailboat and towed the vessel overnight. [25]

On April 15, 2023 the Washington State Ferry MV Walla Walla ran aground on Bainbridge Island in Rich Passage. [26] Anacapa was the Coast Guard cutter sent to the scene. Anacapa cordoned off the area around the grounded ferry and helped evacuate some 600 passengers. [25]

Decommissioning

As early as the mid-2000s the mechanical reliability of the aging Island-class ships became an issue. [7] The Coast Guard began retiring Island-class cutters in 2012, replacing them with Sentinel-class fast-response cutters [6] or, in the case when Anacapa left Petersburg, by the Marine Protector-Class coastal patrol boat USCGC Pike. [27] [28] [29] Anacapa was decommissioned on April 26, 2024 in Port Angeles. At that time, the Coast Guard's intention was to sail the decommissioned cutter to the Coast Guard Yard in Baltimore, Maryland and place her in the Cutter Transition Division. [30] There, Anacapa would likely be prepared for sale to another country or scavenged for parts. [29]

Anacapa earned the Coast Guard Meritorious Unit Commendation for her work between May 20, 1996 and May 20, 1997 and the Special Operations Service Ribbon for her participation in Arctic Shield 2013. [31]

Related Research Articles

Marine Protector-class patrol boat United States Coast Guard ship class

The Marine Protector-class patrol boat is a type of coastal patrol boat of the United States Coast Guard. The 87-foot-long (27 m) vessels are based on the Stan 2600 design by Damen Group and were built by Bollinger Shipyards of Lockport, Louisiana. Each boat is named after sea creatures that fly or swim.

Island-class patrol boat Class of cutters of the U.S. Coast Guard

The Island-class patrol boat is a class of cutters of the United States Coast Guard. 49 cutters of the class were built, of which 3 remain in commission. Their hull numbers are WPB-1301 through WPB-1349.

USCGC <i>Acushnet</i> (WMEC-167) United States Coast Guard cutter

USCGC Acushnet (WMEC-167) was a cutter of the United States Coast Guard, homeported in Ketchikan, Alaska. She was originally USS Shackle (ARS-9), a Diver-class rescue and salvage ship commissioned by the United States Navy for service in World War II. She was responsible for coming to the aid of stricken vessels and received three battle stars during World War II, before a long career with the Coast Guard. Acushnet patrolled the waters of the North Pacific and was one of the last World War II era ships on active duty in the US fleet upon her retirement in 2011.

SLNS <i>Vijayabahu</i> (P627) United States Coast Guard cutter

SLNS Vijayabahu (P627) is an Advanced Offshore Patrol Vessel of the Sri Lanka Navy. The ship is named after King Vijayabahu I, the warrior king of the medieval Sri Lanka who founded the Kingdom of Polonnaruwa.

USCGC <i>Matagorda</i> (WPB-1303)

USCGC Matagorda (WPB-1303) is an Island-class patrol boat of the United States Coast Guard. She was commissioned 24 April 1986. Matagorda was one of eight of the 110-foot cutters to be modified under the Integrated Deepwater System Program aka. "Deepwater" to 123-foot. She was taken out of service about December 2006 due to problems with the Deepwater conversion.

USCGC <i>Confidence</i> US Coast Guard vessel

USCGC Confidence (WMEC-619) is a United States Coast Guard medium endurance cutter.

USCGC <i>Cape Henlopen</i> Type "C" Cape-class coast guard cutter

USCGC Cape Henlopen was a 95-foot (29 m) type "C" Cape-class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1958 for use as a law enforcement and search and rescue patrol boat.

Point-class cutter Class of patrol boats

The Point-class cutter was a class of 82-foot patrol vessels designed to replace the United States Coast Guard's aging 83-foot wooden hull patrol boat being used at the time. The design utilized a mild steel hull and an aluminum superstructure. The Coast Guard Yard discontinued building the 95-foot Cape-class cutter to have the capacity to produce the 82-foot Point-class patrol boat in 1960. They served as patrol vessels used in law enforcement and search and rescue along the coasts of the United States and the Caribbean. They also served in Vietnam during the Vietnam War. They were replaced by the 87-foot Marine Protector-class coastal patrol boats beginning in the late 1990s.

Ukrainian patrol vessel <i>Sloviansk</i> Former Island-class patrol boat

The Ukrainian patrol vessel Sloviansk (P190) was an Island-class patrol boat of the Naval Forces of the Armed Forces of Ukraine. Originally named USCGC Cushing when in service with the United States Coast Guard, the vessel was acquired by Ukraine in 2018 and arrived in Ukraine on 21 October 2019. Sloviansk was sunk in combat on 3 March 2022 by a Russian air-to-surface missile.

USCGC <i>Knight Island</i>

USCGC Knight Island (WPB-1348) receives her namesake from the Knight Island in the Prince William Sounds of Alaska. Knight Island was commissioned on April 22, 1992, at Bollinger Shipyards in Lockport, Louisiana. Knight Island and the other 48 Island class cutter’s construction are based on the internationally known Vosper-Thornycroft design. Her hull is a semi-displacement type monohull made of high strength steel, while the main deck and superstructure are aluminum. Knight Island employs an active fin stabilization system to improve her sea keeping abilities. With a top speed in excess of 30 knots and a cruising speed of 26 knots, the ship is capable of enduring unsupported operations for six days and accommodates two officers and sixteen enlisted personnel.

USCGC <i>Monomoy</i> (WPB-1326)

USCGC Monomoy (WPB-1326) was a United States Coast Guard Island class patrol cutter. She was the 26th ship of her class. The second ship of the Coast Guard to bear the name, Monomoy was named after Monomoy Island which lies off the coast of Cape Cod.

USCGC Point Roberts (WPB-82332) was an 82-foot (25 m) Point class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1962 for use as a law enforcement and search and rescue patrol boat. Since the Coast Guard policy in 1961 was not to name cutters under 100 feet (30 m) in length, it was designated as WPB-82332 when commissioned and acquired the name Point Roberts in January 1964 when the Coast Guard started naming all cutters longer than 65 feet (20 m).

GCGV General Mazniashvili (P211) is a 82-foot (25 m) Point class cutter used by the Coast Guard of Georgia. The boat was originally known as USCGC Point Baker (WPB-82342), having been constructed at the Coast Guard Yard at Curtis Bay, Maryland, in 1963 for use as a law enforcement and search and rescue patrol boat. Since the Coast Guard policy in 1963 was not to name cutters under 100 feet (30 m) in length, it was designated as WPB-82342 when commissioned and acquired the name Point Baker in January 1964 when the Coast Guard started naming all cutters longer than 65 feet (20 m). In 2002 the boat was decommissioned and transferred to the Coast Guard of Georgia where she was commissioned as General Mazniashvili (P211), homeported in Batumi, Georgia.

USCGC Point Steele (WPB-82359) was an 82-foot (25 m) Point class cutter constructed at the J.M. Martinac Shipbuilding Corp. yards at Tacoma, Washington, in 1967 for use as a law enforcement and search and rescue patrol boat. The construction was the same as the earlier cutters in the class that were constructed at the Coast Guard Yard. Point Steele was originally named Point Buchon but it is unknown why the name was changed.

USCGC <i>Liberty</i> U.S. Coast Guard vessel

USCGC Liberty (WPB-1334) is an Island-class cutter of the United States Coast Guard. She spent her first 33 years of service homeported in Juneau, Alaska where she patrolled territorial waters, including the Inside Passage. In 2016 she won the Hopley Yeaton Cutter Excellence Award for outstanding operational and humanitarian achievements. In 2022 she was reassigned to Valdez, Alaska.

USCGC Cape Cross was a 95-foot (29 m) type "C" Cape-class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1958 for use as a law enforcement and search and rescue patrol boat.

USCGC Cape Horn was a 95-foot (29 m) type "C" Cape-class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland, in 1958 for use as a law enforcement and search and rescue patrol boat.

USCGC Cape Darby was a 95-foot (29 m) type "C" Cape-class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1958 for use as a law enforcement and search and rescue patrol boat.

USCGC <i>Roanoke Island</i> US Coast Guard ship

The USCGC Roanoke Island is the 46th Island class cutter to be commissioned. She was commissioned in Homer, Alaska, on February 7, 1992. Five other Island Class cutters are based in Alaska. Her primary missions include "search and rescue, fisheries enforcement and homeland security."

USCGC <i>Terrapin</i> United States Coast Guard ship

USCGC Terrapin (WPB-87366) is a United States Coast Guard ship of the Marine Protector class. She is assigned to Coast Guard District 13 and is home-ported at Bellingham, Washington. Her main areas of responsibility are the San Juan Islands, the Strait of Juan de Fuca, and Puget Sound. Her missions include search and rescue, law enforcement, and homeland security.

References

  1. ↑ Department of Transportation and Related Agencies Appropriations for Fiscal Year 1989: Architectural and Transportation Barriers Compliance Board. Department of Transportation. General Accounting Office. Interstate Commerce Commission. Nondepartmental witnesses. Panama Canal Commission. Washington Metropolitan Area Transit Authority. Washington, D.C.: U.S. Government Printing Office. 1988. p. 520.
  2. ↑ Fahey, James C. (2005). The Ships and Aircraft of the United States Fleet. Naval Institute Press. p. 587.
  3. 1 2 "Anacapa will be commissioned". Petersburg Pilot. January 11, 1990.
  4. 1 2 3 "WPB 110' Island Class". Global Security.
  5. 1 2 3 "USCG 110' "Island Class" Patrol Boats (WPB) | Bollinger Shipyards". www.bollingershipyards.com. Retrieved 2020-06-17.
  6. 1 2 The Cutters, Boats, and Aircraft of the U.S. Coast Guard (PDF). U.S. Coast Guard. 2018. pp. 142–143.
  7. 1 2 Legacy Vessels' Declining Conditions Reinforce Need for More Realistic Operational Targets (PDF). Washington, D.C.: GAO. 2012.
  8. ↑ KFSK-Petersburg, Joe Viechnicki (February 8, 2018). "Petersburg mayor expects loss of Coast Guard cutter in four years". KTOO. Retrieved June 20, 2020.
  9. ↑ "Coast Guard nabs Canadian boat". Statesman Journal. July 17, 1991.
  10. ↑ "Coast Guard Seizes Canadian Boat for fishing in Southeast". Daily Sitka Sentinel. July 15, 1991.
  11. ↑ "AGREEMENT BETWEEN THE GOVERNMENT OF THE UNITED STATES OF AMERICA AND THE GOVERNMENT OF CANADA ON FISHERIES ENFORCEMENT" (PDF). September 26, 1990.
  12. ↑ "Vessel Seized In U.S. Waters". Daily Sitka Sentinel. June 23, 1995.
  13. ↑ "Illegal Immigrants Removed". Petersburg Pilot. August 19, 1993.
  14. ↑ Yang, LCDR Yvonne (2018). 17th Coast Guard District Enforcement Report (PDF). Juneau, Alaska: U.S. Coast Guard. pp. 23–24.
  15. ↑ "U.S. Coast Guard rescues vessels in distress". May 14, 1992.
  16. ↑ Thomson, Lori (July 6, 1995). "Failed autopilot topples seiner". Petersburg Pilot.
  17. ↑ "Coast Guard might displayed after spill". Petersburg Pilot. January 25, 1990.
  18. ↑ Monteith, Robert (December 18, 2008). "Coast Guard cutter leaves Petersburg for upgrades". Petersburg Pilot.
  19. ↑ Department of Homeland Security Appropriations for 2010, Part 1B, 111-1 Hearings, *. 2009. p. 541.
  20. ↑ ">COAST GUARD CUTTER ANACAPA DEPARTS THE CG YARDS AND BEGINS THEIR VOYAGE HOME « Coast Guard Alaska". alaska.coastguard.dodlive.mil. Retrieved June 20, 2020.
  21. ↑ Chaplin, Keith (June 2, 2011). "Anacapa commanding officer temporarily relieved of duty Monday". Petersburg Pilot.
  22. ↑ Chaplin, Keith (July 7, 2011). "Anacapa captain permanently relieved of duty for being intoxicated". Petersburg Pilot.
  23. ↑ "Coast Guard cannon fire sinks Japanese ghost ship damaged in tsunami". New York Daily News. 6 April 2012. Archived from the original on July 5, 2017. Retrieved July 23, 2016.
  24. ↑ "PVFD salutes the departing Anacapa". Petersburg Pilot. Petersburg, Alaska. 5 May 2022. Retrieved May 23, 2024.
  25. 1 2 3 Segall, Peter (April 27, 2024). "Port Angeles-based cutter Anacapa decommissioned" . Peninsula Daily News. Port Angeles, Washington. Retrieved May 23, 2024.
  26. ↑ Girgis, Lauren; Reicher, Mike; Kroman, David (April 15, 2023). "WA ferry runs aground on Bainbridge Island after losing power". The Seattle Times. Retrieved May 23, 2024.
  27. ↑ Zukunft, Admiral Paul F. (2018). letter to Senator Dan Sullivan (PDF).
  28. ↑ Pilot, Petersburg. "USCG 87-foot patrol vessel to be stationed here". Petersburg Pilot. Retrieved 2020-06-20.
  29. 1 2 Flor, Hannah (May 13, 2024). "Coast Guard cutter Anacapa is decommissioned". KFSK Community Radio. Petersburg, Alaska. Retrieved May 23, 2024.
  30. ↑ "U.S. Coast Guard Cutter Anacapa decommissioned after 34 years of service" (Press release). Washington, DC: United States Coast Guard, Department of Homeland Security. April 29, 2024. Retrieved May 23, 2024.
  31. ↑ Coast Guard Military Medals and Awards Manual (PDF). Washington, D.C.: U.S. Coast Guard. 2016.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.