USCGC Madrona

Last updated
USCGC Madrona (WAGL/WLB-302)
Wagl302madrona1961.jpg
History
Flag of the United States.svgFlag of the United States Coast Guard.svgUnited States
BuilderZenith Dredge Company
Cost$949,144
Commissioned30 May 1943
Decommissioned12 April 2002
Refit1984
Identification Callsign: NRPT
FateSold 2002
General characteristics
Class and typeCactus
Displacement1,025 long tons (1,041 t)
Length180 ft (55 m)
Beam37 ft (11 m)
Draft
  • 12 ft (3.7 m) max (1945)
  • 14 ft 7 in (4.45 m) (1966)
Propulsion
  • First refit:
    • 1 electric motor connected to 2 Westinghouse generators driven by 2 Cooper-Bessemer type GND-8, 4 cycle diesels. 1 screw.
  • Second refit:
Speed13  kn (24 km/h; 15 mph)
Range8,000 nmi (15,000 km; 9,200 mi) at 13 kn (24 km/h; 15 mph)
Complement
  • 6 officers, 74 men (1945)
  • 4 officers, 2 warrants, 47 men (1966)
  • 48 (1971)
Sensors and
processing systems
Radar: Bk (1943); SL-1 (1945) Sonar: WEA-2 (1945)
Armament

USCGC Madrona (WAGL/WLB-302) was a U.S. Coast Guard 180 foot seagoing buoy tender. Madrona was built by the Zenith Dredge Company of Duluth, Minnesota at a cost of $949,144.

Contents

History

Madrona was commissioned on 30 May 1943. Upon commissioning, the cutter was assigned the homeport of Miami, Florida. In addition to performing convoy duty during World War II, Madrona was actively involved in the installation of numerous new aids to navigation throughout the Southeastern United States and the Caribbean Sea. In September 1947, Madrona's homeport was changed to Portsmouth, Virginia, where she was responsible for maintenance and inspection of aids to navigation in the Chesapeake Bay. On 27 April 1949, the cutter searched for a reported mine near the Chesapeake Lightship. From 4–6 November 1950, Madrona towed the disabled MV Atlantic Explorer. On 14 May 1951, Madrona assisted following a collision between MV Thomas Tracey and a naval vessel. On 4 October 1951, she assisted MV Marose, which had grounded near Cape Henry, Virginia. On 26 July 1957, Madrona's crew assisted in fighting a fire on MV Havmoy in the Lynnhaven Roads. In February 1958, Madrona was called upon to break ice in the Chesapeake Bay. In April 1959, the cutter assisted MV Terra Nova in the lower Chesapeake Bay. In September 1960, Madrona provided assistance in the Portsmouth area following Hurricane Donna. On 4 February 1963, she assisted following the collision between the MV Skaustrand and the tanker P.W. Thirtle in Baltimore Harbor. On 27–28 February 1967, the crew helped fight a fire on MV Caldas 50 miles east of Chincoteague, Virginia. On 24 May 1980, Madrona escorted the disabled tanker Esso Portland to Hampton Roads. In January 1982, she broke ice in order to permit salvage barges to move to the scene of the Air Florida crash site on the Potomac River in Washington, DC. In February 1983 she located the SS Marine Electric which sank in a storm that month off the coast of Virginia and placed a buoy to mark the wreck's location and warn mariners of the hazard it posed.

In April 1984, Madrona entered the U.S. Coast Guard Shipyard in Curtis Bay, Maryland, to undergo a major renovation under the Coast Guard's Service Life Extension Program, commonly referred to as SLEP. This $15 million overhaul, encompassing the complete rebuilding of the interior of the vessel, greatly improved living conditions and replaced the aging propulsion plant. In September 1989, Madrona was returned to service, this time to her new home port of Charleston, South Carolina, where she remained until her decommissioning. While stationed in South Carolina, Madrona was responsible for the inspection and maintenance of 334 buoys along the South Carolina and Georgia coastlines, as well as Guantánamo Bay Cuba, the eastern part of Puerto Rico, and the U.S. Virgin Islands. In 2000, Madrona set the mooring buoys that helped raise the Confederate Submarine Hunley in Charleston Harbor.

Madrona was decommissioned after almost 59 years of active service in a ceremony held at Coast Guard Base Charleston on 12 April 2002. Following her decommissioning, the cutter was sold to the Navy of El Salvador. As of 30 September 2007, this ship has been reported out of service. It now rests at the bottom of the sea, 7 kilometres (4.3 mi) offshore at Los Cobanos Beach in El Salvador. [1]

Her call sign (NRPT) was jokingly referred to by her crew as being short for "Not Ready for Prime Time". (Personal crewmember knowledge for trivia: served aboard her from 1982-1984.)

Awards and honors

Related Research Articles

USCGC <i>Mesquite</i> Seagoing buoy tender scuttled in Lake Superior

USCGC Mesquite (WAGL/WLB-305) was the lead ship in the Mesquite class of seagoing buoy tenders operated by the United States Coast Guard. She served in the Pacific during World War II, and spent the rest of her Coast Guard career in the Great Lakes. She ran aground and was wrecked in December 1989 off the Keweenaw Peninsula in Lake Superior. She was scuttled nearby as a recreational diving attraction.

USCGC <i>Bramble</i>

USCGC Bramble (WLB-392) is one of the 39 original 180-foot (55 m) seagoing buoy tenders built between 1942 and 1944 for the United States Coast Guard. In commission from 1944 until 2003 she saw service in Pacific, Caribbean and Atlantic waters as well as the Great Lakes. In 1947 Bramble was present at the Nuclear testing at Bikini Atoll and in 1957 a circumnavigation of North America involved a forced traverse of the Northwest Passage. After decommissioning in 2003 Bramble became a museum ship in Port Huron, Michigan. In 2018 she was sold to a private owner, who is preparing MV Bramble to repeat her historic 1957 circumnavigation of North America.

USCGC <i>Conifer</i>

The USCGC Conifer was a 180 foot seagoing buoy tender. Conifer and her sister ships, commonly referred to as "one-eighties", served as the backbone of the Coast Guard's Aids to Navigation fleet for over 50 years before their replacement by the newer Juniper-class cutters.

USCGC <i>Cactus</i>

USCGC Cactus (WLB-270) is a 180 feet (55 m) seagoing buoy tender (WLB). A Cactus-class vessel, she was built by Marine Ironworks and Shipbuilding Corporation in Duluth, Minnesota. Cactus's preliminary design was completed by the United States Lighthouse Service and the final design was produced by Marine Iron and Shipbuilding Corporation in Duluth. On 31 March 1941 the keel was laid, she was launched on 25 November 1941 and commissioned on 1 September 1942. The original cost for the hull and machinery was $782,381.

USCGC <i>Maple</i>

USCGC Maple (WLB-207) is a Juniper-class seagoing buoy tender operated by the United States Coast Guard. She was based at Sitka, Alaska for 16 years and is currently homeported at Atlantic Beach, North Carolina. Her primary mission is maintaining aids to navigation, but she also supports search and rescue, law enforcement, oil spill response, and other Coast Guard missions.

USCGC <i>Sassafras</i> C-class buoy tender, 1943-2003 (now NNS Obula)

Sassafras is a C-Class, 180 ft, seagoing buoy tender constructed for the USCG by Marine Iron & Shipbuilding Corp. of Duluth, Minnesota. Sassafras was one of 39 tenders commissioned for duties that would include aids-to-navigation, ice breaking, search-and-rescue, fire fighting, law enforcement, providing fuel and potable water, and assistance to the National Oceanographic and Seismographic Survey.

USS Bastion (ACM-6) was a Chimo-class minelayer in the United States Navy during World War II.

USCGC <i>Juniper</i> US Coast Guard seagoing buoy tender

USCGC Juniper (WLB-201) is the lead ship of the U.S. Coast Guard's current class of seagoing buoy tenders. She is outfitted with some of the most advanced technological and navigational capabilities currently available.

USCGC <i>Mendota</i> (WHEC-69) US Coast Guard vessel

USCGC Mendota (WHEC-69) was an Owasco class high endurance cutter built for World War II service with the United States Coast Guard. The ship was commissioned three months before the end of the war and did not see combat action until the Vietnam war.

USCGC <i>Elm</i> (WLB-204)

USCGC Elm (WLB-204) is a U.S. Coast Guard Juniper-class seagoing buoy tender home-ported in Astoria, Oregon. She is responsible for maintaining aids to navigation on the coasts of Oregon and Washington, including the Columbia River.

USRC Forward was a revenue cutter constructed for the U.S. Revenue Cutter Service in 1882 by Pusey & Jones shipyard in Wilmington, Delaware. She was the second Revenue Cutter Service vessel named Forward and was named for Walter Forward, the fifteenth United States Secretary of the Treasury. The iron-hulled vessel originally cost US$72,750 and was powered by a two-cylinder steam engine with a topsail schooner brigantine sail pattern. Although Forward was considered a model ship at the time of its construction, it was severely underpowered and had unreliable machinery. The cost of repairs in the first fifteen years of operation was US$52,000.

USCGC <i>Gentian</i>

USCGC Gentian (WLB-290), a Cactus- or A-class buoy tender was built by Zenith Dredge of Duluth, Minnesota. Her keel was laid 3 October 1941, launched 23 May 1942, and commissioned 3 November 1942.

USCGC <i>Laurel</i>

USCGC Laurel WAGL/WLB-291, a Cactus- or A-class United States Coast Guard seagoing buoy tender was built by Zenith Dredge of Duluth, Minnesota. Her keel was laid 17 April 1942, launched 4 August 1942 and commissioned on 24 November 1942.

USCGC Clover WAGL/WLB/WMEC-292, a Cactus (A) Class buoy tender was built by Marine Iron and Shipbuilding, Duluth, Minnesota. Her keel was laid 3 December 1941, and she was launched 25 April 1942. She was commissioned on 8 November 1942 in the United States Coast Guard as the United States Coast Guard Cutter Clover. She was built as a WAGL, redesignated a WLB in 1965, and again redesignated a WMEC in 1979.

USCGC Tupelo WAGL/WLB-303, was a Cactus (A) Class 180-foot buoy tender vessel built by Zenith Dredge Company of Duluth, Minnesota. Her keel was laid 15 August 1942, launched 28 November 1942 and commissioned on 30 August 1943. She was built as a WAGL and redesignated a WLB in 1965.

USCGC <i>Blackhaw</i>

The USCGC Blackhaw (WLB-390) was a Iris-class buoy tender belonging to the United States Coast Guard launched on 18 June 1943 and commissioned on 17 February 1944.

USCGC <i>Ironwood</i> US Coast Guard ship

USCGC Ironwood (WAGL-297/WLB-297) was a Mesquite-class sea-going buoy tender operated by the United States Coast Guard. She served in World War II, the Korean War, and the Vietnam War as well as a variety of domestic missions. She currently serves as a seamanship training vessel for Job Corps.

USCGC <i>Buttonwood</i>

USCGC Buttonwood (WAGL-306/WLB-306) was a Mesquite-class sea-going buoy tender operated by the United States Coast Guard. She served in World War II as well as a variety of domestic missions. After decommissioning she was acquired by the Dominican Republic Navy and renamed Almirante Didiez Burgos. She is still active as the flagship of the Dominican Navy.

USCGC <i>White Sumac</i> White-class buoy tender of the United States Coast Guard

USS YF-416 was an American YF-257-class covered lighter built in 1943 for service in World War II. She was later acquired by the United States Coast Guard and renamed USCGC White Sumac (WAGL-540).

USCGC <i>Red Birch</i> A Red-class buoy tender of the United States Coast Guard

USCGC Red Birch (WLM-687) is a Red-class coastal buoy tender that was designed, built, owned, and operated by the United States Coast Guard. She was launched in 1965 and initially homeported at San Francisco. Her primary mission was maintaining 160 aids to navigation in San Francisco, San Pablo, and Suisun Bays, and in the San Joaquin River. Red Birch also brought supplies to the Farallon Island lighthouse. In 1976 the Coast Guard reassigned her to Baltimore, Maryland, where she spent the rest of her career. There she maintained over 300 aids to navigation including several lighthouses. Her secondary missions included search and rescue, light icebreaking, law enforcement, and marine environmental protection.

References

  1. "Estamos buscando en Ilopango un avión hundido cargado de whisky".