USRC Detector

Last updated
History
Ensign of the United States Revenue-Marine (1815).pngUnited States
Ordered7 July 1825
Awarded27 August 1815
BuilderFisher & Webster, North Yarmouth, Maine
Commissioned1825
Homeport Portland, Maine
FateSold 1832
General characteristics
Class and type Wasp-class schooner
Displacement62 tons
Length52 ft (16 m)
Beam18 ft 3 in (5.56 m)
Draft6 ft 2 in (1.88 m)
Propulsionsail
Sail plan Baltimore Clipper
Crew13

USRC Detector was a Wasp-class schooner built for and operated by the United States Revenue Cutter Service from 1825 to 1832. She is the second ship of the Revenue Cutter Service to bear the name.

Contents

Design and construction

On 7 July 1825, the Revenue Cutter Service authorized the construction of two 55-ton cutters. These ships, later named Detector and Wasp, would differ in design as the Wasp weighed 5 tons lighter. [1] The ships were designed by naval constructor William Doughty in 1815, after he was asked to design three new classes of cutters for the service to recuperate the fleet from losses suffered during the War of 1812. The future Detector was the second largest design in the batch, designed after the Baltimore Clipper model. [2]

Both ships were designed with a keel made of rock maple wood, planking from oak, a billet head, and a squared stern. [3] She was 52 feet long (15.8 meters), had a beam of 18 feet, 3 inches (5.6 meters), and a draft of 6 feet, 2 inches (1.8 meters). [4] Detector appears to have not been armed, compared to the two four-pounder cannons on the Wasp. She was manned by a crew of 13. [5]

A contract for the two ships' construction was authorized on 27 August 1815 [1] to Fisher and Webster of North Yarmouth, Maine. [3] The ship's construction in Portland, Maine was overseen by a captain in the Revenue Cutter Service. [1]

Service history

Detector was stationed out of Portland for her entire career after she was commissioned in 1825. [3] A previous USRC Detector (1812), built in 1812, was stationed in Portland and sold the same year she entered service. [6] [7] On 1 January 1832 she was relieved by USRC Morris, followed by being sold at Portland the same year. [1]

Related Research Articles

<span class="mw-page-title-main">United States Revenue Cutter Service</span> Precursor to the U.S. Coast Guard

The United States Revenue Cutter Service was established by an act of Congress on 4 August 1790 as the Revenue-Marine upon the recommendation of Secretary of the Treasury Alexander Hamilton to serve as an armed customs enforcement service. As time passed, the service gradually gained missions either voluntarily or by legislation, including those of a military nature. It was generally referred to as the Revenue-Marine until 31 July 1894, when it was officially renamed the Revenue Cutter Service. The Revenue Cutter Service operated under the authority of the U.S. Department of the Treasury. On 28 January 1915, the service was merged by an act of Congress with the United States Life-Saving Service to form the United States Coast Guard.

USS Aaron V. Brown was a revenue schooner in the service of the Union Navy during the American Civil War. She was named for United States Postmaster General Aaron V. Brown, the only cutter to bear the name.

Five ships of the United States Navy have borne the name Alert. During World War I, three ships held the name simultaneously.

<span class="mw-page-title-main">Frank H. Newcomb</span> United States Coast Guard commodore (1846–1934)

Frank Hamilton Newcomb was a United States Revenue Cutter Service commodore, best known for his actions at the Battle of Cárdenas during the Spanish–American War.

USRC <i>Crawford</i> (1830) Historic Revenue Cutter Service ship

The United States Revenue Cutter Crawford was the first of the 13 cutters of the Morris-Taney Class to be launched. These cutters were the backbone of the U.S. Revenue Cutter Service for more than a decade. Samuel Humphreys designed these cutters for roles as diverse as fighting pirates, privateers, combating smugglers and operating with naval forces. He designed the vessels on a naval schooner concept. They had Baltimore Clipper lines. The vessels built by Webb and Allen, designed by Isaac Webb, resembled Humphreys' but had one less port

USRC <i>Massachusetts</i>

USRC Massachusetts was one of the first ten cutters operated by the Revenue-Marine. She was built in Newburyport, Massachusetts and served out of Boston. Massachusetts by tradition is held to be the first revenue cutter to enter active service. She was also the first to be decommissioned, having a very short service life of only about 15 months before being sold.

USCGC <i>Tampa</i> (1912) US Coast Guard ship

USCGC Tampa (ex-Miami) was a Miami-class cutter that initially served in the U.S. Revenue Cutter Service, followed by service in the U.S. Coast Guard and the U.S. Navy. Tampa was used extensively on the International Ice Patrol and also during the Gasparilla Carnival at Tampa, Florida and other regattas as a patrol vessel. It was sunk with the highest American naval combat casualty loss in World War I.

USRC <i>Manning</i>

USRC Manning was a revenue cutter of the United States Revenue Cutter Service that served from 1898 to 1930, and saw service in the U.S. Navy in the Spanish–American War and World War I.

USRC <i>Salmon P. Chase</i> Three-masted bark commissioned in 1878

USRC Salmon P. Chase was named after Abraham Lincoln's Secretary of the Treasury, Salmon Portland Chase. It was a three-masted bark with a hull length of 106 feet that was designed for use as a training ship for the cadets of the Revenue Cutter Service School of Instruction.

USRC <i>James C. Dobbin</i>

USRC James C. Dobbin was a topsail schooner of the Cushing class (1853) named after President Franklin Pierce's Secretary of the Navy, James Cochrane Dobbin. She was initially stationed at Wilmington, North Carolina, but in 1856 was moved to Savannah, Georgia. She was seized by a secessionist mob on 3 January 1861 at Savannah and the officers and crew were held in irons. After the local customs inspector protested the seizure, Joseph E. Brown, the governor of Georgia ordered the cutter and crew released. Dobbin was the only revenue cutter based in the South to escape to the North before the Civil War. On 26 April 1861, she was ordered to Philadelphia, Pennsylvania to receive heavier armament and then assigned to New York City. In 1863 Dobbin was reassigned to Portland, Maine where she remained until being ordered to Baltimore, Maryland in December, 1876 to be refitted as a training ship. The first eight cadets of the newly established Revenue Cutter School of Instruction reported aboard Dobbin and they set sail on their first practice cruise on 24 May 1877. One of the eight cadets was future Commandant of the Coast Guard, Worth G. Ross. The following summer, she was replaced by the newly constructed training cutter USRC Salmon P. Chase and Dobbin returned to service as a revenue cutter until she was sold in 1881.

The capture of the schooner Bravo was a naval battle fought in 1819 between United States Revenue Cutter Service cutters and one of Jean Lafitte's pirate ships.

USRC Richard Rush was a Dexter-class cutter of the United States Revenue Cutter Service which served in the coastal waters of the western United States and the Department of Alaska.

USRC <i>Pamlico</i>

USRC Pamlico was a revenue cutter of the United States Revenue Cutter Service that served from 1907 to 1946 designed specifically to cruise inland waters and did so while stationed at New Bern, North Carolina her entire career.

USRC Active, was a revenue cutter of the United States Revenue Cutter Service in commission from 1867 to 1875. She was the fifth Revenue Cutter Service ship to bear the name.

USRC Resolute, was a revenue cutter of the United States Revenue Cutter Service in commission from 1867 to 1872. She was the only Revenue Cutter Service ship to bear the name.

USRC Relief, was a revenue cutter of the United States Revenue Cutter Service in commission from 1867 to at least 1870. She was the first Revenue Cutter Service ship to bear the name.

Captain Alexander V. Fraser, U. S. Revenue Marine, was an American seaman, who served as the first Chief of the Revenue Marine Bureau, Department of the Treasury, one of the predecessor agencies of the United States Coast Guard.

USRC Harrison was the lead ship of her topsail schooner class, which was built and operated by the United States Revenue-Marine, later Revenue Cutter Service, between 1849 and 1856.

USRC Black, also known as the Jeremiah S. Black, was a lead of her class schooner built for and operated by the United States Revenue Cutter Service, in service from 1857 to 1868. She is the only revenue cutter to bear the name.

USRC <i>Algonquin</i>

USRC Algonquin was an Algonquin-class cutter built for the U.S. Revenue Cutter Service for service on the Great Lakes. Because of the Spanish–American War, she was cut in half shortly before completion and transported to Ogdensburg, New York for service on the Atlantic coast although the war ended before she could be put into service. She was homeported at San Juan, Puerto Rico from 1905 to 1917. After the formation of the United States Coast Guard in 1915 she became USCGC Algonquin. She served as a patrol vessel at Norfolk, Virginia at the beginning of World War I before being assigned convoy duty in the Mediterranean. In February 1919 she was transferred to the West Coast and served in the Pacific Northwest and Alaska.

References

  1. 1 2 3 4 United States (1989). Record of movements: vessels of the United States Coast Guard, 1790-December 31, 1933. A bicentennial publication. Washington: Dept. of Transportation, U.S. Coast Guard. p. 80.
  2. Chapelle, Howard (1982). The History of American Sailing Ships. pp. 204, 210.
  3. 1 2 3 "Detector, 1825". United States Coast Guard. Retrieved 2022-04-01.
  4. Silverstone, Paul (2006). The Sailing Navy, 1775-1854. Routledge. p. 81.
  5. Canney, Donald. U.S. Coast Guard and Revenue Cutters, 1790-1935. Naval Institute Press. p. 13.
  6. Canney, Donald. U.S. Coast Guard and Revenue Cutters, 1790-1935. p. 10.
  7. Ostron, Thomas. United States Revenue and Coast Guard Cutters in Naval Warfare, 1790-1918. McFarland. p. 68.