USS AFDM-3

Last updated

AFDM3centersectionlaterYFD-6floatedPanamaCanal.jpg
USS YFD-6
History
Flag of the United States.svgUnited States
NameYFD-6
Builder Chicago Bridge & Iron Company
Laid downJanuary 1943
Acquired1 December 1943
Commissioned9 December 1943
ReclassifiedAFDM-3, 1946
Stricken15 November 2000
Identification
Honors and
awards
See Awards
Fate
General characteristics
Class and type AFDM-3-class floating drydock
Displacement
  • 6,800 t (6,693 long tons), light load
  • 8,000 t (7,874 long tons), full load
Length622 ft 10 in (189.84 m)
Beam124 ft 0 in (37.80 m)
Draft7–15 ft (2.1–4.6 m)
Complement4 officers, 146 enlisted

USS AFDM-3, (former YFD-6), was the lead ship of the AFDM-3-class floating dry dock built in 1943 and operated by the United States Navy. [1]

Contents

Construction and career

YFD-6 was built at the Chicago Bridge and Iron Shipyard, in Chicago, Illinois in January 1943. She was commissioned on 9 December 1943. [2]

From 24 to 26 June 1944, USS Larch (YN-16) was dry-docked inside YFD-6. [3] In late December 1944, USS Arikara (AT-98) voyaged to Trinidad where she took YFD-6 in tow before continuing on to the Panama Canal. [4] On 26 June 1945, YFD-6 was prepared transiting the Panama Canal, circa 1945. YFD-6's center section fully turned 90 degrees, floating on its side with the support of a thousand Navy pontoons installed atop the wing wall. This work, done by Navy SeaBees, was necessary to allow the drydock section to fit through the canal's locks. USS YT-355, USS Alarka (YTB-229) and USS Umpqua (ATA-209) guided and towed the dry dock through the canal. [5] [6] In AUgust 1946, the dry dock was re-designated as AFDM-3. USS Gauger (YO-55) towed AFDM-3 and steaming in company with USS Bluebird (ASR-19), USS Cahuilla (ATF-152) and USS Tawakoni (ATF-114), she reached Pearl Harbor on 12 October 1946. [7] In latter 1948, AFDM-3 and USS AFDM-7 arrived at the Balboa yard to be prepared to transit the Panama Canal similarly to the USS AFDM-1. [8]

Throughout 1950, The US Navy done heavy workload on AFDM-3, USS AFDM-7 and USS AFDM-9. [9]

In 1986, AFDM-3, USS ARD-10 and USS ARD-16 were all laid up in Mobile, Alabama. [10]

In 1999, the dry dock was leased to the Bender Shipbuilding and Repair Company. [11]

The AFDM-6 was struck from the Naval Register on 15 November 2000. [1] On 1 April 2002, it was sold to the company in Mobile. [11]

In 2010, the Bender Shipbuilding Company was declared bankrupt thus all systems were acquired by the Signal International. After 2018, the shipyard was sold to World Marine of Alabama. [12]

Awards

Related Research Articles

<span class="mw-page-title-main">Pearl Harbor Naval Shipyard</span> United States Navy shipyard in Hawaii

The Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility is a United States Navy shipyard located in Pearl Harbor, Hawaii on 148 acres. It is one of just four public shipyards operated by the United States Navy. The shipyard is physically a part of Joint Base Pearl Harbor–Hickam.

USS <i>Artisan</i>

USS Artisan (ABSD-1), later redesignated as (AFDB-1), was a ten-section, non-self-propelled, large auxiliary floating drydock of the United States Navy. The only U.S. warship with this name, Artisan was constructed in sections during 1942 and 1943 by the Everett-Pacific Shipbuilding & Dry Dock Company, in Everett, Washington; the Chicago Bridge & Iron Company, in Eureka, California; the Pollock-Stockton Shipbuilding Company, in Stockton, California; and the Chicago Bridge & Iron Company, in Morgan City, Louisiana. This ship was commissioned at Everett, Washington, on 10 May 1943, Captain Andrew R. Mack in command. With all ten sections joined, she was 927 feet (283 m) long, 28 feet (8.5 m) tall, and with an inside clear width of 133 feet 7 inches (40.72 m).

USS Carib (AT-82) was a Cherokee-class fleet tug constructed for the United States Navy during World War II. Her purpose was to aid ships, usually by towing, on the high seas or in combat or post-combat areas, plus "other duties as assigned." She served in the Atlantic Ocean and the Pacific Ocean.

USS <i>Dewey</i> (YFD-1)

USS Dewey (YFD-1) was a floating dry dock built for the United States Navy in 1905, and named for American Admiral George Dewey. The auxiliary floating drydock was towed to her station in the Philippines in 1906 and remained there until scuttled by American forces in 1942, to prevent her falling into the hands of the invading Japanese.

USS <i>Richland</i> (YFD-64)

USS Richland (YFD-64/AFDM-8) was an AFDM-3-class medium auxiliary floating drydock built in California for the U.S. Navy. Originally named USS YFD-64, she was towed to the Philippines and Guam where she served until war's end.

USS <i>Chimariko</i> Tugboat of the United States Navy

USS Chimariko (ATF-154) was an Abnaki class Fleet Ocean Tug of the United States Navy and the first to be named Chimariko after the Native American tribe in California.

USS <i>Avoyel</i> Tugboat of the United States Navy

USS Avoyel (ATF-150) was a Navajo-class fleet tug built for the United States Navy during World War II. She was the only U.S. Naval vessel to bear the name.

<span class="mw-page-title-main">Auxiliary floating drydock</span> Type of United States Navy drydocks

An auxiliary floating drydock is a type of US Navy auxiliary floating dry dock. Floating dry docks are able to submerge underwater and to be placed under a ship in need of repair below the water line. Water is then pumped out of the floating dry dock, raising the ship out of the water. The ship becomes blocked on the deck of the floating dry dock for repair. Most floating dry docks have no engine and are towed by tugboats to their destinations. Floating dry docks come in different sizes to accommodate varying ship sizes, while large floating dry docks come in sections and can be combined to increase their size and lift power. Ballast pontoon tanks are flooded with water to submerge or pumped dry to raise the ship.

YFD-2 United States Navy drydock

YFD-2 was an auxiliary floating drydock built for the United States Navy in 1901. The first parts were laid down in early 1901 at Maryland Steel Co. of Sparrows Point, Maryland. YFD-2 was the first of its kind, steel movable auxiliary floating drydock, used to raise large ships out the water for repair below the ship's waterline. YFD-2 had a 18,000 tons lifting capacity.

USS <i>AFDM-2</i> Large auxiliary floating drydock of the US Navy

USS AFDM-2,, is an AFDM-3-class medium auxiliary floating drydock built in Mobile, Alabama by the Alabama Drydock and Shipbuilding Company for the U.S. Navy. Originally named USS YFD-4, Yard Floating Dock-4, she operated by Todd Shipyards at New Orleans, Louisiana for the repair of US ships during World War II. YFD-4 was renamed an Auxiliary Floating Dock Medium AFDM-2 in 1945 after the war.

USS <i>ABSD-5</i> WWII American floating drydock

USS ABSD-5, later redesignated as AFDB-5, was a nine-section, non-self-propelled, large auxiliary floating drydock of the US Navy. Advance Base Sectional Dock-5 was constructed in sections during 1943 and 1944 by the Chicago Bridge & Iron Company in Morgan City, Louisiana for World War II. With all nine sections joined, she was 825 feet long, 28 feet tall, and with an inside clear width of 133 feet 7 inches. ABSD-5 had two traveling 15-ton capacity crane with an 85-foot radius and two or more support barges. The two side walls were folded down under tow to reduce wind resistance and lower the center of gravity. ABSD-5 had 6 capstans for pulling, each rated at 24,000 lbf (110,000 N) at 30 ft/min (0.15 m/s), 4 of the capstans were reversible. There were also 4 ballast compartments in each section.

Everett-Pacific Shipbuilding & Dry Dock Company was established in 1942 to build ships needed for World War II. Yard construction began on 1 March 1942. As part of the Emergency Shipbuilding Program, the US Navy provided some of the capital to start Everett-Pacific Shipbuilding at Port Gardner Bay in Everett, Washington. Everett-Pacific was sold in 1945 to the Pacific Car and Foundry, who was already a major manufacturer of railcars and trucks. Pacific Car and Foundry was building barges for the US Navy during World War II at plants in Renton, Seattle and Tacoma in the state of Washington. The lease for the shipyard in Everett, Washington ended in 1949 and the yard closed. Pacific Car and Foundry in 1972 changed its name to Paccar Inc. to reflect its major products. The Everett-Pacific shipyard site later became part of Western Gear, a heavy machinery manufacturer. From 1987 to 1992, the shipyard was rebuilt to become part of Naval Station Everett. Everett-Pacific Shipbuilding was started by William Pigott Jr. a Seattle businessmen and his brother Paul Pigott (1900-1961). William Pigott Jr. was born in 26 Aug. 1895 in Pueblo, CO and died on 8 July 1947 in San Francisco, CA.

Pollock-Stockton Shipbuilding Company was established in 1942 to build ships needed for World War II. As part of the Emergency Shipbuilding Program the US Navy provided some of the capital to start Pollock-Stockton Shipbuilding at Stockton, California. The shipyard was located at San Joaquin River and Stockton Channel, near Louis Park. After the war the shipyard closed down in February 1946.

<span class="mw-page-title-main">Naval Advance Base Espiritu Santo</span> Major World War 2 base

Naval Advance Base Espiritu Santo or Naval Base Espiritu Santo, most often just called Espiritu Santo, was a major advance Naval base that the U.S. Navy Seabees built during World War II to support the Allied effort in the Pacific. The base was located on the island of Espiritu Santo in the New Hebrides, now Vanuatu, in the South Pacific. The base also supported the U.S. Army and Army Air Corps, U.S. Coast Guard, and US Marine Corps. It was the first large advance base built in the Pacific. By the end of the war it had become the second-largest base in the theater. To keep ships tactically available there was a demand for bases that could repair and resupply the fleet at advance locations, rather than return them to the United States. Prior to December 7th, Pearl Harbor was the U.S. fleet's largest advance base in the Pacific. Espiritu became capable of all aspects necessary to support the Fleet's operations from fleet logistics in fuel, food, and ammunition, to transport embarkation for combat operations or returning to the continental United States. The ship repair facilities and drydocks were capable of attending to most damage and routine maintenance. Had it not existed, ships would have had to return to Pearl Harbor, Brisbane, or Sydney for major repairs and resupply. The base became a major R and R destination for the fleet.

USS <i>Hidatsa</i> Abnaki-class tugboat

USS Hidatsa (ATF-102) was Abnaki-class tugboat during the World War II. The ship was later sold to Colombia as ARC Rodrigo de Bastidas (RM-74). Her namesake is an Indian group of the Sioux Tribe of North Dakota, now living on the Fort Berthold Reservation.

USS <i>Resourceful</i> AFDM-3-class dry dock of the United States Navy

USS Resourceful (AFDM-5),, was a AFDM-3-class floating dry dock built in 1943 and operated by the United States Navy.

USS <i>Competent</i> (AFDM-6) AFDM-3-class dry dock of the United States Navy

USS Competent (AFDM-6),, was an AFDM-3-class floating dry dock built in 1943 and operated by the United States Navy.

USS <i>Sustain</i> (AFDM-7) AFDM-3-class dry dock of the United States Navy

The USS Sustain (AFDM-7),, was a AFDM-3-class floating dry dock built in 1945 and operated by the United States Navy.

USS <i>Resolute</i> (AFDM-10) AFDM-3-class dry dock of the United States Navy

USS Resolute (AFDM-10),, was a AFDM-3-class floating dry dock built in 1945 and operated by the United States Navy.

USS <i>Steadfast</i> AFDM-14-class dry dock of the United States Navy

USS Steadfast (AFDM-14) is a AFDM-14-class floating dry dock built in 1945 and operated by the United States Navy.

References

  1. 1 2 "AFDM-3". Naval Vessel Register. 6 June 2002. Retrieved 8 February 2022.
  2. "Auxiliary Floating Dry Dock (AFDM)". www.navsource.org. Retrieved 8 February 2022.
  3. "Larch (YN-16)". NHHC. Retrieved 8 February 2022.
  4. "Arikara (AT-98)". NHHC. Retrieved 8 February 2022.
  5. "NH 98828 Floating drydock YFD-6 (center section)". NHHC. Retrieved 8 February 2022.
  6. "NH 98829 Floating drydock YFD-6 (center section)". NHHC. Retrieved 8 February 2022.
  7. "Gauger". NHHC. Retrieved 8 February 2022.
  8. Governor, Canal Zone Office of the (1948). Annual Report of the Governor of the Panama Canal for the Fiscal Year Ended ... U.S. Government Printing Office. p. 30.
  9. Governor, Canal Zone (1935). Report. U.S. Government Printing Office. p. 37.
  10. The Port of Mobile, Alabama. The Corps. 1986. p. 93.
  11. 1 2 States, United (13 July 2000). United States Statutes at Large. U.S. Government Printing Office. p. 114 STAT. 533.
  12. "BENDER SHIPBUILDING". Ship Building History. 8 October 2020. Retrieved 8 February 2022.