USS Sustain (AFDM-7)

Last updated

USS Sustain (AFDM-7).jpg
USS AFDM-7 and USS Nantahala
History
Flag of the United States.svgUnited States
NameSustain
Namesake Sustain
Builder Everett Pacific Shipbuilding Co.
Acquired1 January 1945
Commissioned1945
Decommissioned1 August 1997
ReclassifiedAFDM-7, 1946
Stricken30 January 2007
Homeport
Identification
Honors and
awards		 See Awards
Fate
StatusOperational in Jacksonville, Florida
General characteristics
Class and type AFDM-3-class floating drydock
Displacement8,000 t (7,874 long tons)
Length622 ft 10 in (189.84 m)
Beam124 ft 0 in (37.80 m)
Draft6 ft (1.8 m)
Complement4 officers, 139 enlisted

The USS Sustain (AFDM-7), (formerly YFD-63), was a AFDM-3-class floating dry dock built in 1945 and operated by the United States Navy. [1]

Contents

Construction and career

YFD-63 was built by the Everett Pacific Shipbuilding Co., in Everett, Washington in 1945. Melucta with YFD-63 in tow departed Everett for Moore Dry Dock Co., Alameda, on 23 January 1945. She would be commissioned later in 1945 after her delivery to the Navy on 1 January. [2]

On 1 August 1946, the dry dock was re-designated as AFDM-7. [2]

On 28 October 1950, the dry dock would be on commercial lease. [2] In 1956, AFDM-7 was towed through the Panama Canal and leased to Alabama Drydock and Shipbuilding Company. [2]

In October 1971, the Navy would reacquire the dry dock as the lease was over. [2] AFDM-7 would be repaired and refitted by the Navy Seabees at Davisville, January 1972. Stationed at Melville from June 1972 until 1974. In December 1972, USS Nantahala (AO-60) was dry docked inside AFDM-7 at Melville. [2] towed to Norfolk in April 1974 and later stationed at Norfolk from 1974 until 1997. On 7 June 1979, the dry dock was finally named Sustain. [2]

In 1984, USS Arthur W. Radford (DD-968) subsequently undergone sea trials and repairs inside Sustain. [3] From 4 September until 9 October 1984, USS Ainsworth (FF-1090) completed work inside Sustain at Norfolk. [4]

USS Kidd (DDG-993) returned to Norfolk and conducted an emergent dry docking with floating dry dock Sustain on 30 May, staying there for over a week for an ASW groom and implementation of the combat system operational sequencing system on 4 June 1990. [5] Sustain was decommissioned on 1 August 1997 and leased to Atlantic Marine and Dry Dock, Inc., Jacksonville on 30 November 1999.

The dry dock broke the towline in a storm off Cape Hatteras on 14 January 2000 and drifted for 300 miles in the Gulf Stream until taken under control by salvage team and towed to Bermuda. Finally arrived at Jacksonville on 24 February 2000. [2] Sustain was struck from the Naval Register on 30 January 2007 and later sold outright to Atlantic Marine on 29 February 2008. [1] [2]

In May 2010, Atlantic Marine was acquired by BAE Systems renamed BAE Systems Southeast Shipyards. [6] [7] In 2015, the shipyard was awarded a $27,625,758 by the Navy to dry dock USS Nitze (DDG-94), for docking selected restricted availability. [8] On 29 March 2019, Detroit was dry docked for repairs inside of the former Sustain. [9]

Awards

Related Research Articles

USS <i>Artisan</i>

USS Artisan (ABSD-1), later redesignated as (AFDB-1), was a ten-section, non-self-propelled, large auxiliary floating drydock of the United States Navy. The only U.S. warship with this name, Artisan was constructed in sections during 1942 and 1943 by the Everett-Pacific Shipbuilding & Dry Dock Company, in Everett, Washington; the Chicago Bridge & Iron Company, in Eureka, California; the Pollock-Stockton Shipbuilding Company, in Stockton, California; and the Chicago Bridge & Iron Company, in Morgan City, Louisiana. This ship was commissioned at Everett, Washington, on 10 May 1943, Captain Andrew R. Mack in command. With all ten sections joined, she was 927 feet long, 28 feet tall, and with an inside clear width of 133 feet 7 inches.

Chicago Bridge & Iron Company Defunct large engineering, procurement and construction (EPC) company

CB&I was a large engineering, procurement and construction (EPC) company with its administrative headquarters in The Woodlands, Texas. CB&I specialized in projects for oil and gas companies. CB&I employed more than 32,000 people worldwide. In May 2018 the company merged into McDermott International. McDermott struggled to integrate its acquisition of Chicago Bridge & Iron Co. On January 21, 2020, McDermott announced that it had filed for Chapter 11 bankruptcy.

USS <i>Dewey</i> (YFD-1)

USS Dewey (YFD-1) was a floating dry dock built for the United States Navy in 1905, and named for American Admiral George Dewey. The auxiliary floating drydock was towed to her station in the Philippines in 1906 and remained there until scuttled by American forces in 1942, to prevent her falling into the hands of the invading Japanese.

USS <i>Richland</i> (YFD-64)

USS Richland (YFD-64/AFDM-8) was an AFDM-3-class medium auxiliary floating drydock built in California for the U.S. Navy. Originally named USS YFD-64, she was towed to the Philippines and Guam where she served until war's end.

Auxiliary floating drydock Type of United States Navy drydocks

An auxiliary floating drydock is a type of US Navy floating dry dock. Floating dry docks are able to submerge underwater and to be placed under a ship in need of repair below the water line. Water is then pumped out of the floating dry dock, raising the ship out of the water. The ship becomes blocked on the deck of the floating dry dock for repair. Most floating dry docks have no engine and are towed by tugboats to their destinations. Floating dry docks come in different sizes to accommodate varying ship sizes, while large floating dry docks come in sections and can be combined to increase their size and lift power. Ballast pontoon tanks are flooded with water to submerge or pumped dry to raise the ship.

YFD-2 United States Navy drydock

YFD-2 was an auxiliary floating drydock built for the United States Navy in 1901. The first parts were laid down in early 1901 at Maryland Steel Co. of Sparrows Point, Maryland. YFD-2 was the first of its kind, steel movable auxiliary floating drydock, used to raise large ships out the water for repair below the ship's waterline. YFD-2 had a 18,000 tons lifting capacity.

USS <i>AFDM-2</i> large auxiliary floating drydock of the US Navy

USS AFDM-2,, is an AFDM-3-class medium auxiliary floating drydock built in Mobile, Alabama by the Alabama Drydock and Shipbuilding Company for the U.S. Navy. Originally named USS YFD-4, Yard Floating Dock-4, she operated by Todd Shipyards at New Orleans, Louisiana for the repair of US ships during World War II. YFD-4 was renamed an Auxiliary Floating Dock Medium AFDM-2 in 1945 after the war.

USS <i>AFDB-2</i> Large auxiliary floating drydock of the US Navy

USS ABSD-2, later redesignated as AFDB-2, was a ten-section, non-self-propelled, large auxiliary floating drydock of the US Navy. Advance Base Sectional Dock-2 was constructed in sections during 1942 and 1943 by the Mare Island Naval Shipyard in Vallejo, California for World War II. Her official commissioning ceremony took place on 14 August 1943 with CDR. Joseph J. Rochefort in command. With all ten sections joined, she was 927 feet long, 28 feet tall, and with an inside clear width of 133 feet 7 inches. ABSD-2 had a traveling 15-ton capacity crane with an 85-foot radius and two or more support barges. The two side walls were folded down under tow to reduce wind resistance and lower the center of gravity. ABSD-2 had 6 capstans for pulling, each rated at 24,000 lbf (110,000 N) at 30 ft/min (0.15 m/s), 4 of the capstans were reversible. There were also 4 ballast compartments in each section.

USS <i>ABSD-3</i> WWII American floating drydock

ABSD-3 is an advanced base sectional dock, constructed of nine advance base dock (ABD) sections for the US Navy as an auxiliary floating drydock for World War II. ABSD-3 was delivered to the US Navy in April 1944, and was commissioned on 27 October 1944. Advance Base Sectional Dock-3 was constructed in sections during 1942 and 1943.

USS <i>ABSD-6</i> WWII American floating drydock

ABSD-6 is an advanced base sectional dock which was constructed of nine advance base docks (ABD) sections for the US Navy as an auxiliary floating drydock for World War II. ABSD-6 was built by Mare Island Naval Shipyard at Vallejo, California. ABSD-6 was commissioned on 28 September 1944. Advance Base Sectional Dock-6 was constructed in sections during 1942 and 1943. Each section are 3,850 tons and are 93 feet long each. Each Section had a 165 feet beam, a 75 feet molded depth and had 10,000 tons lifting capacity each. There were 4 ballast compartments in each section. With all nine sections joined, she was 825 feet long, 28 feet tall, and with an inside clear width of 133 feet 7 inches. ABSD-2 had a traveling 15-ton capacity crane with an 85-foot radius and two or more support barges. The two side walls were folded down under tow to reduce wind resistance and lower the center of gravity. ABSD-6 had 6 capstans for pulling, each rated at 24,000 lbf (110,000 N) at 30 ft/min (0.15 m/s), 4 of the capstans were reversible.

USS <i>ABSD-4</i> Large auxiliary floating drydock of the US Navy

USS ABSD-4, later redesignated as AFDB-4, was a nine-section, non-self-propelled, large auxiliary floating drydock of the US Navy. Advance Base Sectional Dock-4 was constructed in sections during 1942 and 1943 by the Mare Island Naval Shipyard in Vallejo, California for World War II. With all ten sections joined, she was 927 feet long, 28 feet tall, and with an inside clear width of 133 feet 7 inches. ABSD-4 had a traveling 15-ton capacity crane with an 85-foot radius and two or more support barges. The two side walls were folded down under tow to reduce wind resistance and lower the center of gravity. ABSD-4 had 6 capstans for pulling, each rated at 24,000 lbf (110,000 N) at 30 ft/min (0.15 m/s), 4 of the capstans were reversible. There were also 4 ballast compartments in each section.

USS <i>ABSD-5</i> WWII American floating drydock

USS ABSD-5, later redesignated as AFDB-5, was a nine-section, non-self-propelled, large auxiliary floating drydock of the US Navy. Advance Base Sectional Dock-5 was constructed in sections during 1943 and 1944 by the Chicago Bridge & Iron Company in Morgan City, Louisiana for World War II. With all nine sections joined, she was 825 feet long, 28 feet tall, and with an inside clear width of 133 feet 7 inches. ABSD-5 had two traveling 15-ton capacity crane with an 85-foot radius and two or more support barges. The two side walls were folded down under tow to reduce wind resistance and lower the center of gravity. ABSD-5 had 6 capstans for pulling, each rated at 24,000 lbf (110,000 N) at 30 ft/min (0.15 m/s), 4 of the capstans were reversible. There were also 4 ballast compartments in each section.

Everett-Pacific Shipbuilding & Dry Dock Company was established in 1942 to build ships needed for World War II. As part of the Emergency Shipbuilding Program the US Navy provided some of the capital to start Everett-Pacific Shipbuilding at Port Gardner Bay in Everett, Washington. Everett-Pacific was sold in 1945 to the Pacific Car and Foundry, who was already a major manufacturer of railcars and trucks. Pacific Car and Foundry was building barges for the US Navy during World War II at plants in Renton, Seattle and Tacoma in the state of Washington. The lease for the shipyard in Everett, Washington ended in 1949 and the yard closed. Pacific Car and Foundry in 1972 changed its name to Paccar Inc. to reflect its major products. The Everett-Pacific shipyard site later became part of Western Gear, a heavy machinery manufacturer. in 1987 the shipyard became part of Naval Station Everett. Everett-Pacific Shipbuilding was started by William Pigott Jr. a Seattle businessmen and his brother Paul Pigott (1900-1961). William Pigott Jr. was born in 26 Aug. 1895 in Pueblo, CO and died on 8 July 1947 in San Francisco, CA.

Pollock-Stockton Shipbuilding Company was established in 1942 to build ships needed for World War II. As part of the Emergency Shipbuilding Program the US Navy provided some of the capital to start Pollock-Stockton Shipbuilding at Stockton, California. The shipyard was located at San Joaquin River and Stockton Channel, near Louis Park. After the war the shipyard closed down in February 1946.

Naval Advance Base Espiritu Santo World War 2 base

Naval Advance Base Espiritu Santo or Espiritu Santo Naval Base, most often just called Espiritu Santo, was an advance Naval base that the U.S. Navy Seabees built during World War II to support the allied effort in the Pacific. Espiritu Santo Naval Base was located on the island Espiritu Santo in the New Hebrides, now Vanuatu in the South Pacific. The base also supported the U.S. Army and Army Air Corps, U.S. Coast Guard, and US Marine Corps. Espiritu Santo Naval Base was the first large advance base built in the Pacific. By the end of the war it had become the second-largest base in the theater. To keep ships tactically available there was a demand for Advance bases that could repair and resupply the fleet at advance locations, rather than bring ships back to the United States. Prior to December 7th, Pearl Harbor was the U.S. fleet's largest advance base in the Pacific. Espiritu became, capable of all aspects necessary to support the Fleet's operations from fleet logistics in fuel, food, and ammunition, to transport embarkation for combat operations or returning to CONUS. The ships repair facilities, and drydocks were capable of attending to most damage and routine maintenance. Had it not existed, ships would have had to return to Pearl Harbor, Brisbane,or Sydney for major repairs and resupply. The base became a major R and R destination for the fleet.

USS <i>Resourceful</i> AFDM-3-class dry dock of the United States Navy

USS Resourceful (AFDM-5),, was a AFDM-3-class floating dry dock built in 1943 and operated by the United States Navy.

USS <i>AFDM-3</i> AFDM-3-class dry dock of the United States Navy

USS AFDM-3,, was the lead ship of the AFDM-3-class floating dry dock built in 1943 and operated by the United States Navy.

USS <i>Competent</i> (AFDM-6) AFDM-3-class dry dock of the United States Navy

USS Competent (AFDM-6),, was a AFDM-3-class floating dry dock built in 1943 and operated by the United States Navy.

USS <i>Resolute</i> (AFDM-10) AFDM-3-class dry dock of the United States Navy

USS Resolute (AFDM-10),, was a AFDM-3-class floating dry dock built in 1945 and operated by the United States Navy.

USS <i>Steadfast</i> AFDM-14-class dry dock of the United States Navy

USS Steadfast (AFDM-14),, was a AFDM-14-class floating dry dock built in 1945 and operated by the United States Navy.

References

  1. 1 2 "Sustain (AFDM-7)". Naval Vessel Register. 29 February 2008. Retrieved 8 February 2022.
  2. 1 2 3 4 5 6 7 8 9 "Auxiliary Floating Dry Dock (ARD)". www.navsource.org. Retrieved 8 February 2022.
  3. ↑ "Arthur W. Radford". public2.nhhcaws.local. Retrieved 8 February 2022.
  4. ↑ "Ainsworth (FF-1090)". public1.nhhcaws.local. Retrieved 8 February 2022.
  5. ↑ "Kidd II (DDG-993)". public1.nhhcaws.local. Retrieved 8 February 2022.
  6. ↑ Hoyos, Carola (11 September 2010). "BAE prepares to streamline US business". The Financial Times. London.
  7. ↑ Szakonyi, Mark (18 May 2010). "BAE to buy Atlantic Marine for $352M". Jacksonville Business Journal. Retrieved 2 July 2012.
  8. ↑ "Two BAE shipyards win Navy contracts". Marine Log. 31 July 2014. Retrieved 8 February 2022.
  9. ↑ "190329-N-QI061-037". DVIDS. Retrieved 8 February 2022.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.