UTA AEC Class

Last updated

UTA AEC Class
Lambeg station (1971) - geograph.org.uk - 991887.jpg
An AEC Railcar at Lambeg in service with NIR
Push-pull train (interior), Drogheda (geograph 2857948).jpg
Interior of a push–pull vehicle at Drogheda in June 1980 with plastic chairs and graffiti
In service1951–1972
Manufacturer GNR Works, Dundalk
ReplacedSteam locomotives and carriages
Constructed1951
Scrapped1972
Number built20 Power Cars (10 After 1958)
Number scrappedAll
Formation2–8 cars (maximum 4 power cars)
Capacity44–91 seats per power car, depending on arrangement
Operators Ulster Transport Authority
Northern Ireland Railways
Specifications
Car body constructionSteel on timber framing
Car length62 feet 6 inches (19.05 m)
Width9 feet 6 inches (2.90 m)
Height12 feet 6 inches (3.81 m)
Maximum speed120 km/h (75 mph)
Weight38.5 long tons (39.1 t) (single power car)
Prime mover(s) Two AEC A215 in each power car
Power output250 brake horsepower (190 kW) per power car
Transmission Mechanical; five-speed preselector gearbox
HVAC Steam heating
UIC classification 1A′A1′
Braking system(s) Vacuum
Coupling system Screw
Track gauge 1,600 mm (5 ft 3 in)
See Rail gauge in Ireland

Following the end of World War II, most railways throughout the world were looking to either update their fleet of steam locomotives with new and more economical designs or look towards alternatives, which for many meant a programme of dieselisation. The main considerations were the rising cost of coal against diesel oil and the weight of the trains causing wear and tear on the track. In looking to the dieselisation of their system the Ulster Transport Authority (UTA) made early inroads with small, lightweight diesel units, based on those built for the Great Western Railway in England, using the same manufacturers to supply parts and undertaking construction in their own workshops.

Contents

History

AEC (Associated Equipment Company Limited) of Southall, London were a well known bus chassis, engine and body builders responsible for many types of London's famous red buses. They also provided engines for many diesel railcars built for, or by, the Great Western Railway and later British Railways. In the early 1950s, with dieselisation being undertaken on the GNR(I) and the UTA systems, their products were supplied to both companies.

In August 1951 UTA's York Road works outshopped two new power cars which, following on the first diesel acquisitions, were numbered 6 and 7. They lasted well, 15 July 1966 seeing their last recorded working, after which they were not used again, although not officially withdrawn. On the formation of NIR they were included in the stock transferred over, to be officially withdrawn in December 1968. To increase capacity the unit ran with coach 279, as a centre trailer car, which was converted to work with this set. It became 528 in 1958.

At the same time, (1950/1), AEC were also responsible for power cars supplied to the GNR(I) and on the division of stock of that company in 1958 ten of these entered the UTA lists. Numbered from 111 to 120 inclusive they were, in order, originally GNR(I) No's. 603/602/607/606/611/610/615/614/619/618. Trailers from these railcars were converted from existing GNR steam coaches and retained their GNR numbers (Except vehicles 8 and 9, later UTA 585+586, which were built new as AEC driving trailers). Those that were acquired by UTA became 554 555 580 581 582 585 586 593 (The gaps being due to their numbering in the same series as BUT trailers). Kitchen Car 166 was converted to an AEC trailer in 1967 and retained its number.

Withdrawal

All NIR AEC railcars were withdrawn by 1972. The last set in service was 114-586-115 stopped in September of that year

No's 6 & 7 were involved in the Lisburn accident on 5 February 1963 (which also involved Class WT, No.2) and were sent to Dunluce Street for repairs.

Technically, and theoretically, No's. 6 and 7 were compatible with 111 - 120 but never ran with them.

Related Research Articles

<span class="mw-page-title-main">Railbus</span> Lightweight passenger rail vehicle that shares many aspects of its construction with a bus

A railbus is a lightweight passenger railcar with an automotive engine. They shares many aspects of its construction with a bus, typically having a bus body and four wheels on a fixed base instead of on bogies. Originally designed and developed during the 1930s, railbuses have evolved into larger dimensions with characteristics similar in appearance to a light railcar, with the terms railcar and railbus often used interchangeably. Railbuses designed for use specifically on little-used railway lines were commonly employed in countries such as Germany, Italy, France, the United Kingdom, and Sweden.

<span class="mw-page-title-main">Downpatrick and County Down Railway</span> Heritage railway and museum in Downpatrick, Northern Ireland

The Downpatrick and County Down Railway (DCDR) is a 5 foot, 3 inch gauge heritage railway in County Down, Northern Ireland. It is operated by volunteers and runs passenger trains using steam and diesel locomotives, diesel railcars, and vintage carriages. The railway has approximately three miles (4.8 km) of track in a triangular-shaped layout, which connects the town of Downpatrick with the historical sites of Inch Abbey to the north and King Magnus’ Grave to the south. It also houses a museum of railway artefacts and rolling stock originating from both Northern Ireland and the Republic of Ireland, dating from the 1860s to the 1980s.

<span class="mw-page-title-main">GWR railcars</span> Railcars used on the Great Western Railway

In 1933, the Great Western Railway introduced the first of what was to become a successful series of diesel railcars, which survived in regular use into the 1960s, when they were replaced with the new British Rail "first generation" type diesel multiple units.

British United Traction (BUT) was a manufacturer of railway equipment and trolleybuses. It was established in 1946 as a joint venture between AEC and Leyland.

A wide variety of diesel and electric multiple units have been used on Ireland's railways. This page lists all those that have been used. Except with the NIR Class 3000, the numbers given by each class in the lists below are those allocated to the coaches that make up the units in that class, otherwise, unit numbers are not used in Ireland.

A wide variety of hauled coaches have been used on the railways of Ireland. This page lists all those since 1945.

<span class="mw-page-title-main">Sentinel Waggon Works</span> Manufacturer of steam vehicles

Sentinel Waggon Works Ltd was a British company based in Shrewsbury, Shropshire that made steam-powered lorries, railway locomotives, and later, diesel engined lorries, buses and locomotives.

<span class="mw-page-title-main">Great Northern Railway (Ireland)</span> Defunct railway company

The Great Northern Railway (Ireland) (GNR(I) or GNRI) was an Irish gauge (1,600 mm (5 ft 3 in)) railway company in Ireland. It was formed in 1876 by a merger of the Irish North Western Railway (INW), Northern Railway of Ireland, and Ulster Railway. The governments of Ireland and Northern Ireland jointly nationalised the company in 1953, and the company was liquidated in 1958: assets were split on national lines between the Ulster Transport Authority and Córas Iompair Éireann.

<span class="mw-page-title-main">UTA MED</span>

The Ulster Transport Authority Multi-Engined Diesel was an early diesel powered railcar, used in Northern Ireland. The 12-mile Belfast-Bangor railway line had a well used passenger service and, being devoid of goods traffic, was chosen as the testing ground for the diesel railcar era. Before deciding to build its own railcars the UTA conducted an experiment by borrowing from the GNR(I). This was considered such a success that the UTA constructed its own experimental three-coach diesel railcar set at its Duncrue Street works, this being outshopped in late Spring 1951, ready for testing and driver training.

<span class="mw-page-title-main">UTA MPD</span> Northern Irish diesel powered railcar, in service from 1957 to 1983

The Ulster Transport Authority Multi-Purpose Diesel was a diesel powered railcar, used in Northern Ireland. It was developed by the Ulster Transport Authority (UTA) as a progression of the earlier Multi-engined Diesel (MED). The MED concept, while suitable for short commuter links, was not considered so for the Northern Counties Committee section, with its main line from Belfast to Derry where speeds of up to 110 km/h (68 mph) were required. A new railcar development was needed, and the MED was superseded by the MPD.

<span class="mw-page-title-main">UTA 70 Class</span> Diesel train built for Northern Ireland

UTA 70 class was a diesel multiple unit train built for service on the Ulster Transport Authority's railway network. The MED’s and MPD’s, which made use of readily available power and transmission units, were cheap to operate but noisier and not as comfortable as locomotive-hauled rolling stock, a fact which made them unsuitable for Inter-City journeys. The decision was made to develop a new generation of multiple unit and in July 1966 the first of the new DEMU sets entered service.

<span class="mw-page-title-main">NIR 80 Class</span>

The 80 Class is a type of diesel electric multiple unit formerly used by Northern Ireland Railways. They were affectionately nicknamed 'Thumpers' by rail enthusiasts due to the thumping noise their engines produced.

<span class="mw-page-title-main">GNRI AEC Class</span>

The Great Northern Railway of Ireland (GNRI) AEC Class were Associated Equipment Company (AEC)–engined diesel multiple units that operated InterCity and suburban services on the GNRI and later Ulster Transport Authority (UTA) systems between 1950 and 1975. They were finally withdrawn in 1972. They were the inspiration for the CIÉ 2600 Class.

<span class="mw-page-title-main">South Australian Railways Redhen railcar</span> Class of Australian railcar / diesel multiple unit

The Redhen railcars was the nickname given to the 300 and 400 classes of diesel-hydraulic railcars designed by the South Australian Railways and built at its Islington Railway Workshops between 1955 and 1971. The railcars, which operated in Adelaide suburban service until 1996, remain a nostalgic part of South Australian memory. Some continue to be operated by the SteamRanger Heritage Railway, the National Railway Museum, Port Adelaide and other railway preservation entities.

The railways of New South Wales, Australia, use a large variety of passenger and freight rolling stock. The first railway in Sydney was opened in 1855 between Sydney and Granville, now a suburb of Sydney but then a major agricultural centre. The railway formed the basis of the New South Wales Government Railways. Passenger and freight services were operated from the beginning. By 1880, there was a half hourly service to Homebush.

<span class="mw-page-title-main">CIÉ 2600 Class</span>

The Córas Iompair Éireann (CIÉ) 2600 Class were Associated Equipment Company (AEC)–engined diesel multiple units that operated InterCity and suburban services on the CIÉ system between 1952 and 1975. Many were later converted for push–pull operation with diesel locomotives, finally being withdrawn when displaced by the electric Dublin Area Rapid Transit service in the mid-1980s.

<span class="mw-page-title-main">South Australian Railways Brill railcar</span>

Two models of the Brill railcar were operated by the South Australian Railways between 1925 and 1971. Introduced to run on country rail services, the "Barwell Bulls" serviced most of the state's railway lines until they were eventually replaced by both the Bluebird and Redhen railcars. The last units were withdrawn in 1971.

<span class="mw-page-title-main">British railcars and diesel multiple units</span> Network Rail

Diesel multiple units and railcars are trains, usually with passenger accommodation, that do not require a locomotive. Railcars can be single cars, while in multiple units cars are marshalled together with a driving position either end. As of December 2010, 23 percent of the rail passenger cars used on Network Rail are part of a diesel multiple unit.

<span class="mw-page-title-main">British steam railcars</span> A self-propelled railcar powered by a steam engine

A steam railcar is a rail vehicle that does not require a locomotive as it contains its own steam engine. The first steam railcar was an experimental unit designed and built in 1847 by James Samuel and William Bridges Adams. In 1848, they made the Fairfield steam carriage that they sold to the Bristol and Exeter Railway, who used it for two years on a branch line.

<span class="mw-page-title-main">GNRI BUT Class</span>

The GNRI BUT Class was a fleet of diesel-powered railcars operated by the Great Northern Railway Board and its successors between 1957 and 1980. They were an evolution of the earlier AEC railcars, which had entered service in 1951.

References