Undine (Colorado River sternwheeler)

Last updated

Undine was a stern-wheel steamboat, built in Rock Island, Illinois and shipped to Green River, Utah, and launched in November 1901 by its owner and captain Frank H. Summerhill. It was a flat bottomed stern-wheel steamer, 60 feet in length, 10 feet on the beam, with a draft of 12 unladen to 20 inches carrying 15 tons of cargo. It had a coal-fired, 20 horsepower engine. Summerhill intended to serve a tourist trade from Green River to the Colorado cataracts as the prime source of his income. However he also intended to begin a shipping business up the Grand River, to Moab.

Summerhills first voyage down the Green River to the Colorado River cataracts was a success, and he spent some time there locating a site for his resort. The then steamed up the Grand, past the Green River all the way to Moab.

Summerhill realized that carrying cargo down the Grand and up the Green Rivers was longer and more difficult than attempting to steam 40 miles up the Grand River from Moab to a landing near the Denver and Rio Grande Western Railroad rail head of Cisco. He spent several mouths blasting rock hazards out of the Grand on the route, then attempted an ascent. The Undine had difficulty pulling itself up the first rapids with its cable and capstan. After several attempts resulting in snapped cables, it ascended the first rapid but at Big Bend, while ascending rapids with the cable, Undine's bow was caught in a current and it capsized, wreaking it on May 21, 1902. [1] :109-113

Related Research Articles

Steamboats of the Skeena River

The Skeena River is British Columbia’s fastest flowing waterway, often rising as much as 17 feet (5.2 m) in a day and fluctuating as much as sixty feet between high and low water. For the steamboat captains, that wide range made it one of the toughest navigable rivers in British Columbia. Nevertheless, at least sixteen paddlewheel steamboats plied the Skeena River from the coast to Hazelton from 1864 to 1912.

Steamboats of the Columbia River

Many steamboats operated on the Columbia River and its tributaries, in the Pacific Northwest region of North America, from about 1850 to 1981. Major tributaries of the Columbia that formed steamboat routes included the Willamette and Snake rivers. Navigation was impractical between the Snake River and the Canada–US border, due to several rapids, but steamboats also operated along the Wenatchee Reach of the Columbia, in northern Washington, and on the Arrow Lakes of southern British Columbia.

Steamboats of the Mississippi type of boats used in the 19th century for the Mississippi river

Steamboats played a major role in the 19th-century development of the Mississippi River and its tributaries by allowing the practical large-scale transport of passengers and freight both up- and down-river. Using steam power, riverboats were developed during that time which could navigate in shallow waters as well as upriver against strong currents. After the development of railroads, passenger traffic gradually switched to this faster form of transportation, but steamboats continued to serve Mississippi River commerce into the early 20th century. A small number of steamboats are used for tourist excursions into the 21st century.

Cataract Canyon canyon on the Colorado River in San Juan, Garfield, and Wayne counties in Utah, United States

Cataract Canyon is a 46-mile-long (74 km) canyon of the Colorado River located within Canyonlands National Park and Glen Canyon National Recreation Area in southern Utah. It begins at the Colorado's confluence with the Green River and its downstream terminus is the confluence with the Dirty Devil River. The lower half of the canyon is submerged beneath Lake Powell when the lake is at its normal high water elevation of 3,700 feet (1,100 m).

Joseph Christmas Ives was an American soldier, botanist, and an explorer of the Colorado River in 1858.

<i>Oregona</i> (sternwheeler)

The steamboat Oregona operated on the Willamette River, the Columbia River and the Yamhill River from 1904 to 1936. From 1924 to 1936 this vessel was known as the Interstate.

Steamboats of the Colorado River Set of boats used in the Colorado river

Steamboats on the Colorado River operated from the river mouth at the Colorado River Delta on the Gulf of California in Mexico, up to the Virgin River on the Lower Colorado River Valley in the Southwestern United States from 1852 until 1909, when the construction of the Laguna Dam was completed. The shallow draft paddle steamers were found to be the most economical way to ship goods between the Pacific Ocean ports and settlements and mines along the lower river, putting in at landings in Sonora state, Baja California Territory, California state, Arizona Territory, New Mexico Territory, and Nevada state. They remained the primary means of transportation of freight until the advent of the more economical railroads began cutting away at their business from 1878 when the first line entered Arizona Territory.

Explorer was a small, custom-made stern-wheel steamboat built for Second lieutenant Joseph Christmas Ives and used by him to carry the U. S. Army Corps of Topographical Engineers expedition to explore the Colorado River above Fort Yuma in 1858.

Colorado, was a stern-wheel paddle-steamer, the third steamboat on the Colorado River, and first stern-wheel steamboat put on that river, in December 1855.

Cocopah, was a stern-wheel paddle-steamer, the fifth steamboat on the Colorado River, first put on the river in August 1859.

General Jesup was a side-wheel paddle-steamer, named for General Thomas Jesup then Quartermaster General of the United States Army, and was the second steamboat launched on the Colorado River, in 1854.

Esmerelda, was a stern-wheel paddle-steamer, built for the Sacramento River trade, in 1864 it became the first of the opposition steamboats on the Colorado River. It was also the first steamboat to tow large cargo barges on that river, in May 1864 and to reach Callville, Nevada in 1866.

Benjamin Minturn Hartshorne (1826–1900) was a California businessman who immigrated during the California Gold Rush. He was involved in Sacramento River and Colorado River steamboats as well as maritime shipping.

Mohave was the first stern-wheel steamboat of that name running on the Colorado River between 1864 and 1875.

Nina Tilden, one of the two opposition stern-wheel steamboats that ran on the Colorado River from 1864 to 1868. Purchased by George A. Johnson Company it ran on the Colorado River from 1868 until 1874.

George A. Johnson & Company was a partnership between three men who pioneered navigation on the Colorado River. Benjamin M. Hartshorne, George Alonzo Johnson and Alfred H. Wilcox. The George A. Johnson & Company was formed in the fall of 1852, and was reorganized as the Colorado Steam Navigation Company in 1869.

Mohave II

Mohave, the second stern-wheel steamboat of that name running on the Colorado River for the Colorado Steam Navigation Company (C.S.N.C) between 1876 and 1875. It was the first and only double smokestack steamboat to run on the river.

<i>Cochan</i> (sternwheeler)

Cochan, (Quechan) last of the stern-wheel steamboats built for the Colorado Steam Navigation Company (CSNC). It ran on the Colorado River between 1900 and 1909.

Major Powell was a 3 ton, twin screw driven steamboat built and launched in 1891 on the Green River at Green River, Utah, in August 1891. Its owner was the Green Grand & Colorado River Navigation Company headed by B. S. Ross. The company was formed to run a line of excursion steamers down the Green River to its conjunction with the Colorado River and four miles down the Colorado as far as the first cataract at the head of Cataract Canyon, to a hotel to be built for tourists. The Major Powell was 35 feet long and 8 feet abeam, with a 26 inch draft. It had an open deck covered by a canvas canopy. Its two 6 horsepower steam engines were coal-fired, each driving one of the twin screws.

<i>Imnaha</i> (sternwheeler)

Imhaha was a stern-wheel steamboat which operated on the Snake River in 1903. The steamer was built, launched, placed in service, and wrecked within a single year. The rapids on the Snake river had only rarely been surmounted by a steamboat, and generally only with the aid of a steel cable for lining used to winch the entire boat upstream through the rapids. After only a few trips, Imnaha was destroyed in Mountain Sheep rapids, just downstream from the mining settlement of Eureka, on the Oregon side of the river.

References