Victualling Inshore Craft

Last updated

The Victualling Inshore Craft, or VIC, was a type of auxiliary vessel built for the Royal Navy during the Second World War. The VIC was modelled on the Clyde puffer, and over 100 were built during the conflict.

Contents

Background

During the First World War the Royal Navy had need of an auxiliary vessel suitable for lightering supplies to its ships in a variety of settings, often with insufficient, or completely without, shore facilities. Numerous civilian vessels were requisitioned, but the type found most suitable was the Clyde puffer. This was a small, coal-fired, steam ship, with a comparatively large hold and equipped with a derrick for unloading. The puffers were employed ferrying all manner of supplies around the Firth of Clyde and Scotland's west coast, where small communities had limited, or no, harbour facilities. [1]

Design

With the outbreak of the Second World War, and the decline in numbers of the puffers during the 1930s, led the Admiralty to order the Victualling Inshore Craft, to a design based on two recent puffers, the Hay boats Anzac and Lascar. These were both coal-fired and steam-powered, limiting the pressure on supplies of fuel oil and diesel, though later VICs were diesel-powered. The puffers were typically divided into "shorehead" (or coastal) boats, with a maximum length of 66 ft, and "outside" (sea-going) boats, of 80 ft. The shorehead boats were within the dimensions of the Forth & Clyde Canal sealocks, making it possible for them to enter the inland waterway system, though the outside boats were more suited to the Atlantic conditions off the west coast. [1]

Construction

Some 107 VICs were ordered by the Admiralty; of these four were later cancelled, and four others were unfinished at the war's end, being completed for merchant service. Of the 99 in RN service, 63 were of the coastal (66 ft) type, and 36 (mostly later) of the sea-going (80 ft) type. The majority, 88, were steam-powered, while 11 (9 coastal, and 2 sea-going) had diesel engines. [2]

While the puffer was a Scottish design, the Clyde shipyards were fully occupied with building and repairing ships for the Merchant and the Royal Navys, so the VICs were built at river and canal yards in England. The main yards involved were Dunston, of Thorne, South Yorkshire (40 in total built) and Pimblotts of Northwich (28). Other yards employed were S&D Brown, of Hull; Watson, of Gainsborough; Pollock, of Faversham; Richards, of Lowestoft; Harker, of Knottingley; Goole Shipbuilding and Rowhedge Ironworks. [3]

Service history

The VICs were employed at RN harbours and anchorages around the coast of Britain, lightering all manner of supplies as needed. Their largely unsung work was nonetheless vital to the smooth running of naval operations. With the war's end the VICs were sold into merchant service, many being employed on the Clyde into the late 1940s and 50's.

Notes

  1. 1 2 History at Clyde Maritime; retrieved 14 February 2018
  2. ↑ List of VICs (compiled by Allan T. Condie) at VIC56.co.uk; retrieved 14 February 2018
  3. ↑ List of Builders at Clyde Maritime; retrieved 14 February 2018

Related Research Articles

The United States Navy, United States Coast Guard, and United States National Oceanic and Atmospheric Administration (NOAA) use a hull classification symbol to identify their ships by type and by individual ship within a type. The system is analogous to the pennant number system that the Royal Navy and other European and Commonwealth navies use.

<span class="mw-page-title-main">Warship</span> Ship that is built and primarily intended for naval warfare

A warship or combatant ship is a ship that is used for naval warfare. Usually they belong to the navy branch of the armed forces of a nation, though they have also been operated by individuals, cooperatives and corporations. As well as being armed, warships are designed to withstand damage and are typically faster and more maneuverable than merchant ships. Unlike a merchant ship, which carries cargo, a warship typically carries only weapons, ammunition and supplies for its crew.

<span class="mw-page-title-main">Paddle steamer</span> Steam-powered vessel propelled by paddle wheels

A paddle steamer is a steamship or steamboat powered by a steam engine driving paddle wheels to propel the craft through the water. In antiquity, paddle wheelers followed the development of poles, oars and sails, whereby the first uses were wheelers driven by animals or humans.

<span class="mw-page-title-main">Clyde puffer</span>

The Clyde puffer is a type of small coal-fired and single-masted cargo ship, built mainly on the Forth and Clyde Canal, which provided a vital supply link around the west coast and Hebrides of Scotland.

<span class="mw-page-title-main">Motor torpedo boat</span> Type of fast torpedo boat

A motor torpedo boat is a fast torpedo boat, especially of the mid 20th century. The motor in the designation originally referred to their use of petrol engines, typically marinised aircraft engines or their derivatives, which distinguished them from other naval craft of the era, including other torpedo boats, that used steam turbines or reciprocating steam engines. Later, diesel-powered torpedo boats appeared, in turn or retroactively referred to as "motor torpedo boats" for their internal combustion engines, as distinct from steam powered reciprocating or turbine propulsion.

<span class="mw-page-title-main">Launch (boat)</span> Type of boat

Launch is a name given to several different types of boat. The wide-range of usage of the name extends from utilitarian craft through to pleasure boats built to a very high standard.

<span class="mw-page-title-main">Yarrow Shipbuilders</span> Former shipbuilding firm based in Glasgow, Scotland

Yarrow Shipbuilders Limited (YSL), often styled as simply Yarrows, was a major shipbuilding firm based in the Scotstoun district of Glasgow on the River Clyde. It is now part of BAE Systems Surface Ships, owned by BAE Systems, which has also operated the nearby Govan shipyard since 1999.

<i>Algerine</i>-class minesweeper Class of ships built for the navies of Britain and Canada during World War II

The Algerine-class minesweeper was a large group of minesweepers built for the Royal Navy (RN) and the Royal Canadian Navy (RCN) during the Second World War. 110 ships of the class were launched between 1942 and 1944.

<span class="mw-page-title-main">Motor gunboat</span> British Second World War small high-speed military vessel

The motor gunboat (MGB) was a small, high-speed British military vessel of the Second World War, which was armed with a mix of guns, in contrast to the physically similar motor torpedo boat (MTB), whose main offensive weapon were torpedoes. The small size of the MGBs, and their high speed, made them difficult targets for German E-boats, though, like their opponents, they were limited by heavy weather, because they did not provide a stable-enough platform to aim the guns. The large number of guns meant the crew was relatively large, numbering as high as thirty men on the largest boats.

<span class="mw-page-title-main">Type C1 ship</span> Class of American cargo ships

Type C1 was a designation for cargo ships built for the United States Maritime Commission before and during World War II. Total production was 493 ships built from 1940 to 1945. The first C1 types were the smallest of the three original Maritime Commission designs, meant for shorter routes where high speed and capacity were less important. Only a handful were delivered prior to Pearl Harbor. But many C1-A and C1-B ships were already in the works and were delivered during 1942. Many were converted to military purposes including troop transports during the war.

<i>River</i>-class submarine Type of British submarines in service during WWII

The River class, or Thames class, were a class of submarines built for the Royal Navy. Operating during the Second World War, the three boats of the class comprised Thames, Severn and Clyde. All the submarines were named after rivers in the United Kingdom. One was lost during the war and the rest taken out of service following it.

Motor launch (naval) Type of small Royal Navy vessel used by British Coastal Forces

A motor launch (ML) is a small military vessel in Royal Navy service. It was designed for harbour defence and submarine chasing. Similar vessels were used by the Royal Air Force for armed high-speed air-sea rescue. Some vessels for water police service are also known as motor launches. Motor launches were slower than motor torpedo boats and motor gun boats

Steam gun boat 1941 class of British steam gunboats

Steam gun boats (SGBs) were small Royal Navy vessels built from 1940 to 1942 for Coastal Forces during World War II. The class consisted of nine steam-powered torpedo boats.

<span class="mw-page-title-main">Coastal Forces of the Royal Canadian Navy</span> Military unit

The Coastal Forces of the Royal Canadian Navy (RCN) was a specialized naval force of well-armed, small and fast motor launch (ML) and motor torpedo boat (MTB) flotillas, primarily crewed by members of the Royal Canadian Naval Volunteer Reserve (RCNVR). Tasked with escort, coastal defence, anti-submarine, minesweeping and search and rescue duties, the Coastal Forces of the RCN contributed to securing Allied sea lines of communication off the coasts of Canada and Britain during the Second World War.

<span class="mw-page-title-main">Allied Chinese Ships</span>

The terms Allied Chinese Ships and Allied China Fleet refer to 32 vessels of the Hong Kong-based China Navigation Company requisitioned by the Royal Navy and the Royal Australian Navy during World War II. Following the Battle of Singapore in early 1942, many of the requisitioned ships joined the Allied retreat to Australia. Six were acquired by the Royal Australian Navy; four of these were commissioned as auxiliary warships, while two served as Victualing Supply Issuing Ships.

<span class="mw-page-title-main">Admiralty tug</span>

Admiralty tugs were tugboats built for and operated by the Royal Navy. These were vessels built to Admiralty specifications and in specific classes during the First and Second World Wars. They were built to meet the Royal Navy's demand for auxiliary vessels and to supplement the civilian tugs requisitioned by the Admiralty for war service.

<span class="mw-page-title-main">HM Victualling Yard, Deptford</span>

HM Victualling Yard, Deptford was a Royal Navy Victualling Yard established alongside Deptford Royal Dockyard on the River Thames. There was victualling activity on the site for the best part of 300 years from the mid-17th century through to the early 1960s.

Richards (Shipbuilders) Ltd was a shipyard in Lowestoft, Suffolk and Great Yarmouth, Norfolk

References

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.