W44 Concentrate Train

Last updated

The W44 Concentrate Train conveyed lead and zinc concentrates from the Zinc Corporation owned mines at Broken Hill, New South Wales to the Sulphide Corporation Cockle Creek Smelter south of Newcastle.

In August 1961, the Sulphide Corporation opened a new smelter based on the Imperial Smelting Process. The plant used high grade concentrates from the mines at Broken Hill and as they were owned by the same controlling interests these came from the Zinc Corporation and New Broken Hill Consolidated Mines. [1]

AD60 class locomotive 6003 at Molong Arhs 6003 molong.jpg
AD60 class locomotive 6003 at Molong

To haul the concentrates the New South Wales Government Railways modified 80 G class open wagons by permanently closing the bottom discharge doors to form the GC wagon. These were run in block trains of 16 wagons making a load of 1,020 long tons (1,040 t). These were hauled by a single 49 class diesel locomotive from Broken Hill to Parkes, the loading being 200 tons greater than the maximum allowed for the 49 class. At Parkes a 36 class and AD60 class Garratt took over for the journey to Molong where the 36 was replaced by another AD60 for the journey to Lithgow. A 46 class electric locomotive took the train from Lithgow to Gosford (the then limit of electrification) where another AD60 would take over to Sulphide Junction. [1]

The rail link to the smelter was an important change in the pattern of transporting concentrates from Broken Hill as previously they had gone by sea to Cockle Creek. In the 1970s changes to the smelter allowed lower grade material to be used which was sourced from other mines and the running of W44 declined along with the scrapping of the steam locomotives. [1] The smelter itself ceased operations in 2003.

Railfan interest

The combination of heavy freight engines and the running times of the train, daylight through spectacular scenery, made the W44 Concentrate train a popular photographic target by railfans documenting the last phase of steam engine use of the New South Wales Government Railways.

Related Research Articles

Broken Hill Town in New South Wales, Australia

Broken Hill is an inland mining city in the far west of outback New South Wales, Australia. It is near the border with South Australia on the crossing of the Barrier Highway (A32) and the Silver City Highway (B79), in the Barrier Range. It is 315 m (1,033 ft) above sea level, with a hot desert climate, and an average rainfall of 235 mm (9 in). The closest major city is Adelaide, the capital of South Australia, which is more than 500 km (311 mi) to the southwest and linked via route A32.

New South Wales C38 class locomotive class of 30 Australian 4-6-2 locomotives

The C38 class was a class of steam locomotive built for the New South Wales Government Railways in Australia.

Richmond Vale railway line colliery railway line in the Hunter Region of New South Wales, Australia

The Richmond Vale Railway was a 4 ft 8 12 in colliery railway line in the Hunter Region of New South Wales, Australia, servicing coal mines at Minmi, Stockrington, Pelaw Main and Richmond Main. It was over 26 km (16 mi) long and passed through three tunnels, and was the last commercially operated railway in Australia to use steam locomotives.

Broken Hill ore deposit mine in western New South Wales, Australia

The Broken Hill Ore Deposit is located underneath Broken Hill in western New South Wales, Australia, and is the namesake for the town. It is arguably the world's richest and largest zinc-lead ore deposit.

The New South Wales 85 class were a class of 10 electric locomotives built by Comeng, Granville between May 1979 and July 1980 for the Public Transport Commission.

New South Wales 86 class locomotive

The 86 class is a class of electric locomotives built by Comeng, Granville for the State Rail Authority of New South Wales.

3820 preserved New South Wales C38 class locomotive

3820 is a 4-6-2 steam locomotive operated by the New South Wales Government Railways between 1947 and 1970. It has been preserved by the Trainworks Railway Museum, Thirlmere.

Silverton Tramway

The Silverton Tramway was a 58-kilometre-long 1,067 mm railway line running from Cockburn on the South Australian state border to Broken Hill in New South Wales. Operating between 1888 and 1970, it served the mines in Broken Hill, and formed the link between the 1,435 mmstandard gauge New South Wales Government Railways and the narrow gauge South Australian Railways lines. It was owned and operated by the Silverton Tramway Company (STC).

New South Wales Z26 class locomotive class of 20 Australian 2-6-2T locomotives

The 26 class was a class of steam locomotives built by Dübs and Company for the New South Wales Government Railways of Australia.

New South Wales AD60 class locomotive class of 42 four-cylinder 4-8-4+4-8-4 Garratt locomotives

The AD60 class were Beyer-Garratt patent articulated four-cylinder, simple, non-condensing, coal-fired superheated, 4-8-4+4-8-4 heavy goods steam locomotives built by Beyer, Peacock and Company for the New South Wales Government Railways in Australia.

Cardiff Locomotive Workshops

The Cardiff Locomotive Workshops were situated between Cockle Creek and Cardiff stations near Newcastle on the Main North railway line in New South Wales, Australia.

Consolidated Zinc was an Australian mining company from 1905 to 1962. The company's initial operations focused on extracting zinc from mine tailings of the Broken Hill Ore Deposit at Broken Hill, New South Wales, Australia. The company was founded in Melbourne on 9 September 1905 as the Zinc Corporation Limited, to exploit residual zinc concentrations with an estimated value of $12 million in the 6 million tons of mine tailings deposited from mining activities over the previous 20 years. Key figures involved in the effort included William Baillieu and William Sydney Robinson. Also involved was future U.S. president, but then a mining engineer working for Bewick, Moreing and Company, Herbert Hoover, who inspected the tailing dumps in the group's investigations prior to formation of the company. Other investors in the new company were Clark & Robinson, and Arthur Terrell. They established concentrating mills at Broken Hill in 1905 and 1910, and in 1906 an associated sulphuric acid manufacturing plant whose first manager was H. W. Gepp.

South Maitland Railways 10 Class class of 14 Australian 2-8-2T locomotives

The South Maitland Railways 10 Class locomotives is a class of 14 2-8-2T steam locomotives built for the East Greta Coal Company by Beyer, Peacock and Company in Manchester, England, between 1911 and 1925. Members of this class of locomotive were the last steam locomotives in commercial use in Australia.

BHP Newcastle 37 class

The BHP Newcastle 37 class were a class of diesel locomotives built by A Goninan & Co, Broadmeadow for the BHP, Newcastle steelworks between 1960 and 1983.

SSR Mining Inc. Vancouver-based mining company

SSR Mining Inc., formerly Silver Standard Resources, is a Vancouver-based mining company focused on the operation, development, exploration and acquisition of precious metal projects. It is listed under the ticker symbol SSRM on the NASDAQ Capital Markets and the Toronto Stock Exchange.

The D1 class were a class of diesel locomotives built by Commonwealth Engineering, Granville with English Electric traction equipment for Australian Iron & Steel's, Port Kembla steelworks in 1950-1951.

The Tarrawingee Tramway was a railway in the Barrier Ranges region of New South Wales.

Christmas Island Phosphate Co.s Railway transport company

The Christmas Island Phosphate Co.'s Railway was a 19.7 km long industrial railway between Flying Fish Cove and South Point on Christmas Island. The remains of the South Point station are now heritage-listed.

Charles Frederick Courtney was an English metallurgist, manager of the Sulphide Corporation, a mining and chemical manufacturing company in Australia.

Edgar Arthur Ashcroft was an electrical engineer who developed an electrolytic process for extracting zinc metal from its sulphides.

References

  1. 1 2 3 "The Concentrate Train" Roundhouse July 1985 pages 4-48