Worldwide Ultralite Clipper

Last updated

Clipper
Role Ultralight aircraft
National origin United States
Manufacturer Worldwide Ultralite Industries
StatusProduction completed

The Worldwide Ultralite Clipper is an American ultralight aircraft that was designed and produced by Worldwide Ultralite Industries of Katy, Texas in the early 1980s. The aircraft was supplied as a kit for amateur construction. [1] [2]

Contents

With a strut-braced parasol-wing, conventional landing gear, single engine in tractor configuration and its single-seat, open cockpit configuration, the Clipper resembles a small conventional light aircraft and was designed to appeal to private pilots looking for an ultralight aircraft. [1]

Design and development

The aircraft was designed to comply with the US FAR 103 Ultralight Vehicles rules, including the category's maximum empty weight of 254 lb (115 kg). The aircraft has a standard empty weight of 252 lb (114 kg). [1]

The aircraft is made from bolted-together aluminum tubing, covered in Dacron sailcloth. Its 30 ft (9.1 m) span wing has flaps and is supported by parallel lift struts and jury struts. The airframe was proof tested to +9/-6g ultimate load. The conventional landing gear features balloon tires and a steerable tailwheel. The standard powerplant supplied by the factory was the 40 hp (30 kW) Rotax 447, single ignition, two cylinder, two-stroke aircraft engine. [1]

The company was noted for its marketing of the aircraft at trade shows, such as EAA AirVenture. They employed scantily-clad models to attract attention to the aircraft, something not normally seen at aircraft trade shows. [1]

Specifications (Clipper)

Data from Cliche [1]

General characteristics

Performance

Related Research Articles

The Airdrome Dream Classic is a minimalist, high wing, single seat, single engine ultralight aircraft inspired by the 1908 Santos-Dumont Demoiselle and produced in kit form by Airdrome Aeroplanes of Holden, Missouri.

Fisher FP-404 Canadian homebuilt light aircraft

The Fisher FP-404 is a Canadian single-seat, conventional landing gear, single-engined biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

The Fisher FP-505 Skeeter is a Canadian single-seat, conventional landing gear, single-engined parasol-wing monoplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

The Fisher FP-606 Sky Baby is a Canadian single-seat, conventional landing gear or tricycle landing gear-equipped, single-engined, high-wing monoplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

The InterPlane Griffon is a single seat, high wing, single engine, pusher configuration, tricycle gear ultralight aircraft, that was produced in kit form from InterPlane Aircraft of Zbraslavice, Czech Republic.

Phantom X1

The Phantom X1 is a single-engined, tractor configuration, single seat, cable-braced high wing tricycle gear-equipped ultralight aircraft that is produced by Phantom Aeronautics of Three Rivers, Michigan and available in kit form.

Joplin Tundra

The Joplin Tundra is a family of Canadian, high-wing, strut-braced, pusher configuration ultralight aircraft that was originally produced by Back Forty Developments of Campbellford, Ontario, Canada and later by Joplin Light Aircraft of Joplin, Missouri and Laron Aviation of Borger, Texas for amateur construction. The aircraft is out of production.

Aerotique Parasol American ultralight aircraft

The Aerotique Parasol is an American parasol-wing, strut-braced, conventional landing gear, single-seat, open cockpit, single engine in tractor configuration, ultralight aircraft that was designed as an ultralight version of the 1926 vintage Heath Parasol. It was originally produced by Yesteryear Aviation and later by Aerotique Aviation. The aircraft was supplied as factory-built only.

The Aircore Cadet is an American ultralight aircraft that was designed by Jim Scott and produced by Aircore Industries in the early 1980s. The aircraft was supplied as a kit for amateur construction.

The Mariner Aircraft Mariner is an American ultralight amphibious flying boat that was designed by Larry Seifert and produced by Mariner Aircraft, starting in 1989. The aircraft was supplied as a kit for amateur construction.

The Rotec Panther is an American ultralight aircraft that was designed and produced by Rotec Engineering, introduced in 1984. The aircraft was supplied as a kit for amateur construction.

The Worldwide Ultralite Spitfire is an American ultralight aircraft that was designed by Fred Bell and manufactured by Worldwide Ultralite Industries and later by Don Ecker and Air Magic Ultralights of Houston, Texas. The aircraft was supplied as a kit for amateur construction.

The Ultra-Fab Sundowner, also called the Sundowner Convertible, is an American ultralight aircraft that was designed by Bob Leinen and produced by Ultra-Fab. The aircraft was supplied as a kit for amateur construction.

The Thor T/A is a Canadian ultralight aircraft that was designed by Thorsten B. Strenger and produced by Thor Air of Weston, Ontario. The aircraft was supplied as a kit for amateur construction.

The Cloudbaser Trikes Cloudbaser is a flying wing ultralight trike that was designed and produced by Cloudbaser Trikes. The aircraft was supplied as a kit and was also available as plans for amateur construction.

The J & J Ultralights Tukan is an American ultralight trike that was marketed by J & J Ultralights, Leading Edge Air Foils and Kemmeries Aviation. The aircraft was supplied as a kit, as parts and as plans for amateur construction.

North Wing Maverick American ultralight trike aircraft

The North Wing Maverick is an American single-seat ultralight trike designed and produced by North Wing Design of East Wenatchee, Washington. The aircraft is supplied as a kit for amateur construction.

The North Wing Apache is an American two-seat ultralight trike designed and produced by North Wing Design of East Wenatchee, Washington. The aircraft is supplied as a kit for amateur construction.

The Concept Prowler is an American ultralight trike that was designed and produced by Concept Aviation of Knoxville, Tennessee.

The TC's Trikes Coyote is an American ultralight trike that was designed by TC Blyth and produced by TC's Trikes of Soddy-Daisy, Tennessee. Originally known as the TC Trike, with the introduction of strut-braced Mustang wing the model became known as the Coyote.

References

  1. 1 2 3 4 5 6 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page E-10. Cybair Limited Publishing, 2001. ISBN   0-9680628-1-4
  2. Popular Mechanics (December 1984). "Kitplanes Without a Licence". Google Books . Retrieved November 5, 2011.