Wright Micron | |
---|---|
Peter Wright holding a scale model of the Micron | |
Role | Human-powered aircraft |
National origin | United Kingdom |
Manufacturer | Peter Wright |
Number built | 1 |
The Micron was the second of two human-powered aircraft designed and built by Peter Wright, an engineer from Melton Mowbray, England. [1]
Wright had previously designed and built the Wright MPA Mk 1, which first flew in 1972. The low wing loading of that design affected the flight opportunities which could be made. The design of his second human-powered aircraft, the Micron, began in 1974 with the intent that it be robust and practical; to this end, it had a relatively high wing loading, thereby increasing flight opportunities. [2] It was also intended to be easily assembled and transportable in a glider trailer. [3]
The Micron was of conventional configuration. It was a low-wing monoplane, with a very streamlined fuselage and a V-tail empennage. [1] The pilot sat in a recumbent position, pedalling a set of bicycle pedals, and powering a pusher propeller mounted on a pylon located near the front of the fuselage. [2] Power transmission was by a cable/roller drive. [4] The craft made extensive use of plastics, expanded polystyrene, and carbon fibre. The fuselage, tail, and upper wing surfaces were all produced using moulds. [2]
The craft was completed by February 1976, and involved 200 hours of construction time. [5] A month later it was reported that the Micron was undergoing trials at RAF Cranwell, and was being hangared there alongside the Jupiter and Mercury human-powered aircraft. [4] The website Human Powered Flight reports that the craft was later converted into a single-place sailplane, which was based at the Buckminster Gliding Club. [5]
Data from AeroModeller, [1] Man-Powered Flight, [2] and Human Powered Flight [5]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
Related lists
The Gossamer Albatross is a human-powered aircraft built by American aeronautical engineer Dr Paul B MacCready's company AeroVironment. On June 12, 1979, it completed a successful crossing of the English Channel to win the second Kremer prize worth £100,000.
The MacCready Gossamer Condor was the first human-powered aircraft capable of controlled and sustained flight; as such, it won the Kremer prize in 1977. Its design was led by Paul MacCready of AeroVironment, Inc.
A human-powered aircraft (HPA) is an aircraft belonging to the class of vehicles known as human-powered transport.
The Southampton University Man Powered Aircraft on 9 November 1961 became the first human-powered aeroplane to make an officially authenticated take-off and flight. It was designed and built by Southampton university students between 1960 and 1961 for an attempt at the Kremer prize, but it was never able to complete the 'figure-of-eight' course specified to claim the prize money.
The HPA Toucan is a British two-seat human-powered aircraft built and flown by members of the Hertfordshire Pedal Aeronauts and was the first two-person human-powered aircraft to fly.
The Chrysalis was a human-powered biplane, designed and built by graduates and undergraduates of the Massachusetts Institute of Technology, with Professor Eugene Larabee acting as Project Adviser. MIT had previously built two HPAs, the BURD and BURD II, both of which were unsuccessful.
The Goodhart Newbury Manflier was a two-place human-powered aircraft designed by Nicholas Goodhart. Its most notable feature was that the two pilots were placed in separate fuselages, spaced 70 ft apart.
The Southend MPG Mayfly was a British two-seat human-powered aircraft built by members of the Southend Man-Powered Group in the 1960s. It was one of the first two-person human-powered aircraft to have been built and tested, although it never flew.
The Paxton man-powered aircraft was the project of architect Tony Paxton, to create a compact human-powered aircraft, suitable for sports flying.
The Wright MPA Mk 1 was the first of two human-powered aircraft designed and built by Peter Wright, an engineer from Melton Mowbray, England.
The Olympian ZB-1 was the first human-powered aircraft to have flown in the United States. It was designed, built, and flown by Joseph A. Zinno, of North Providence, Rhode Island. Zinno had previously been a USAF Lieutenant Colonel, and undertook the challenge of making a human-powered aircraft as a post-retirement project.
The BURD was a two-place human-powered biplane, designed and built by graduates and undergraduates of the Massachusetts Institute of Technology, with Professors Eugene Covert and James Mar acting as project advisers. It was developed with the specific goal of winning the £50,000 Kremer prize then on offer.
The BURD II was a two-place human-powered biplane, designed and built by graduates and undergraduates of the Massachusetts Institute of Technology. It is very similar to the original BURD, which suffered a structural collapse during testing in 1975, but incorporated changes to its structure and its control systems.
The Dragonfly was a human-powered aircraft, designed and built by the Prestwick Man Powered Aircraft Group, based at the Prestwick International Airport in South Ayrshire, Scotland.
The Ikarus was a human-powered ornithopter, designed by the sculptor and designer Emiel Hartman in the late 1950s.
The Halton Jupiter was a human-powered aircraft which established distance and duration records in the early 1970s.
The Smolkowski-Laviolette biplane was a Canadian human-powered biplane designed and built by two Calgary aeronautical engineers, Alvin Smolkowski and Maurice Laviolette, in the 1960s.
Keith Sherwin is an English academic and author of publications promoting human-powered aircraft and engineering textbooks.
Ronald Godfrey Moulton (1924–2010) was an English author and editor, notable for his work in the field of scale models and aeromodelling.
The Maniatis MPA was a human-powered aircraft that was built by Michael Maniatis in the late 1970s and tested at Mitchel Field, Long Island, New York. It did not fly.