Mullicoupe | |
---|---|
Mullicoupe at Vintage Aero Flying Museum, March 2007 | |
Role | Light Trainer and Racer |
Manufacturer | Younkin-Dake |
Designer | Jim Younkin |
Introduction | 1989 |
Status | 2 still flying 3 flying in 2003 |
Primary user | Civil Aviation |
Number built | 3 |
A Younkin-Dake Mullicoupe is a two-place monoplane modeled on a Monocoupe 90 and Mister Mulligan, a Howard DGA-6.
Jim Younkin of Springdale, Arkansas completed a frame of this aircraft in 1989 and a homebuilt model earlier in 1985 with the help from Bud Dake. Three Mullicoupes were flying by 1997. The idea of this design came to Younkin and Dake at the Ottumwa, Iowa Antique Airplane Association's Fly-In in 1982 after a discussion about Younkin's Mister Mulligan. Bud Dake suggested they design a 2-seat aircraft which would be as fast as the Mister Mulligan but powered by a smaller P&W R-985 engine. Younkin then designed a scale model which was somewhat of a cross between the Benny Howard-designed Mister Mulligan but with the fuselage shape of a Monocoupe. The Mullicoupes are a clean-sheet design utilizing a steel tube fuselage double-covered in fabric with built up wood wings skinned in aircraft plywood. The airfoil used on the Mullicoupe is the NACA 23012 having a chord of 63", but with an elliptical and tapered planform. The flaps are full Fowler flaps that travel on hidden hinges built into the wings, which is another Younkin original design.
Three original Mullicoupes were created and a fourth was started but never finished. At present they are owned by Mark Holliday, Mr. Younkin himself, and Red Lerille. A fourth Mullicoupe, owned by Stein Bruch of Minnesota, is being completed with the assistance of Jim Younkin. The Black/Red Mullicoupe N274Y which was completed by Bud Dake (deceased) is owned by Mark Holliday, is on display and flies at the Vintage Aero Flying Museum, Platte Valley Airpark, Hudson, Colorado. Mr. Holliday is known to travel extensively with this black and red Mullicoupe, making appearances at fly-ins around the American Midwest.
The Red Younkin-owned Mullicoupe N273X suffered a loss of power which resulted in a forced landing in a field near Siloam Springs, Arkansas on November 10, 2009. [1] The aircraft suffered significant damage, but is currently being repaired.
General characteristics
Performance
Related development
The Howard DGA-15 is a single-engine civil aircraft produced in the United States by the Howard Aircraft Corporation from 1939 to 1944. After the United States' entry into World War II, it was built in large numbers for the United States Navy and also served various roles in the United States Army Air Forces.
The Monocoupe 90 was a two-seat, light cabin airplane built by Donald A. Luscombe for Monocoupe Aircraft. The first Monocoupe was built in an abandoned church in Davenport, Iowa, and first flew on April 1, 1927. Various models were in production until the late 1940s.
The Howard DGA-8, DGA-9, DGA-11, and DGA-12 were a family of four-place, single-engine, high-wing light monoplanes built by the Howard Aircraft Corporation, Chicago, Illinois from 1936.
The Howard DGA-6 was a pioneer racing plane, nicknamed "Mister Mulligan". It was the only airplane ever designed for the specific purpose of winning the Bendix Trophy. The plane was designed and developed by Ben Howard and Gordon Israel, who later became an engineer for the Grumman Aircraft Engineering Corporation. Mister Mulligan was designed to fly the entire length of the race nonstop and at high altitude. Neither had ever been done before. Mister Mulligan won the trophy, and thus changed the way in which long distance airplanes were designed.
Howard Aircraft Corporation was a small United States aircraft manufacturer in the 1930s and 1940s. The factory was initially on the south side of Chicago Municipal Airport at 5301 W. 65th Street; during World War II a second plant was opened at DuPage Airport west of Chicago.
Ira H. Abbott was an American aerospace engineer. After graduating from MIT, Abbott started working for Langley Aeronautical Laboratory in 1929. He contributed significantly to the establishment of high-speed research programs and published numerous technical reports on aerodynamics. He eventually attained the post of assistant chief of research at Langley in 1945.
The LIPNUR Sikumbang was a low-wing monoplane of mixed construction built in Indonesia in 1954 as a COIN and anti-guerrilla-warfare aircraft. Of conventional configuration, it had fixed tricycle undercarriage and seated the pilot under a bubble canopy. A single example was built under the designation NU-200 in 1954, and another as the NU-225 in 1957. The latter machine was grounded in 1967.
The Gatard Statoplan AG 02 Poussin was a light, single-seat sports airplane developed in France in the late 1950s and marketed for homebuilding. In layout, it was a low-wing cantilever monoplane of short-coupled design with fixed tailwheel undercarriage. Construction was a plywood-covered wooden structure throughout, and the cockpit was enclosed by a large perspex bubble canopy. The variable-incidence horizontal stabiliser was fitted with small endplates to provide extra directional stability but there were no separate elevators.
The Prue 215 is an American high-wing, V-tailed, single-seat glider that was designed by Irving Prue in 1949.
The Howard DGA-3 "Pete", a.k.a. "Damned Good Airplane – 3", "Baker Special", and "Little Audrey" is the third aircraft built by Ben Howard, and the first in a series of racing aircraft. Howard claimed that the aircraft was so fast from his use of "Go Grease".
The Kimball McCullocoupe is a homebuilt aircraft built around the design of the Clipwing 110 Special Monocoupe.
The CVV1 Pinguino was a single seat, high performance glider designed and built in Italy in the mid-1930s, the first of a series of gliders from the Milan Polytechnic. It did not go into production.
The Coupé-Aviation JC-01 is the first of a series of very similar designs of two seat, single engine sports aircraft, amateur built from plans in France from 1976. These provided a range of engine sizes and undercarriage layouts, but total production was small.
The Aviator Shershen' is a Russian two seat biplane, sold in kit form. It first flew in 2005 and several variants have been produced, with a choice of engines.
The Speedtwin E2E Comet 1, originally named the Phillips ST1 Speedtwin, is a two-seat, twin engined aircraft designed in the UK to be capable of aerobatics and the only civil twin certified for intentional spinning. After a long development time, just two have been built.
The IIL IS-5 was a single seat, high performance sailplane designed by Iosif Șilimon and built in Romania in 1960.
The Landray GL.01 is a small tandem-wing, side-by-side seat sport aircraft of the Mignet Pou-du-Ciel type. Built in the mid 1970s, the single example remains active.
The Lambert Twin Monocoach was a light, twin-engined U.S. aircraft, designed to carry three or four passengers. Initially it was fitted with economical, low-powered engines but even given a large increase of power it failed to attract customers.
The IPAI-26 Tuca was a Brazilian single engined high-wing light utility aircraft.
RV-5 is a one-off proof-of-concept prototype airplane designed by Richard VanGrunsven. Although the designation is the 5th in the Van's Aircraft "RV" series, the RV-5 was never intended as a production aircraft but as a project for VanGrunsven and fellow members of his Experimental Aircraft Association (EAA) chapter.