Zeiss rail

Last updated
A SIG Sauer SSG 3000 bolt action rifle fitted with a Zeiss Victory Diavari 3-12x56 telescopic sight with Zeiss rail. SIG Sauer SSG 3000.jpg
A SIG Sauer SSG 3000 bolt action rifle fitted with a Zeiss Victory Diavari 3-12x56 telescopic sight with Zeiss rail.

Zeiss inner rail, [1] generally simply referred to as Zeiss rail, is a ringless scope sight mounting system introduced by Zeiss in 1990 as an alternative to traditional ring mounts. [2] A patent was granted in 1992, and the patent expired in 2008. [3] [1] The mounting system is now also offered on sights sold by other major manufacturers, such as Blaser, [4] Leica, Minox, Meopta, Nikon, [5] Noblex (formerly Docter [6] ), Schmidt & Bender [7] and Steiner. [8] The system has so far seen most use on the European high-end market. [9]

Contents

History

Before the Zeiss rail, many European scope manufacturers used to offer a single type of standardized ringless mounting solution known as standard prism. This mounting solution was also known under names such as exterior rail, 70° prism rail or LM rail (Light Metal). [10] Compared to ring mounts, this type of mounting rail permitted mounting without putting compression on the internal mechanics of the scope. The system allowed the shooter to place the scope at their preferred height[ citation needed ] and correct eye relief (distance to the eye), as well as the opportunity to easily move the scope between different firearms.

However, the standard prism had an aesthetic drawback in that the scope rail had to drilled on the side for attachment screws. In case the rifle scope was to be used on different guns, new holes often had to be drilled. A motivation for developing the Zeiss rail was to avoid such drilling.[ citation needed ]

The Zeiss rail system was introduced in 1990 as an option on all Zeiss ZM/Z riflescopes, the top-of-the-line riflescope offered by Zeiss at that time.[ citation needed ] The system was later offered on the new top of line VM/V models. For these reasons, some sources have referred to the Zeiss rail system under names such as Zeiss ZM/VM rail or Zeiss M rail. Names such as Zeiss Integral rail, Zeiss 45° rail or simply Z rail have also been used. [9]

Technical

Compared to the older prism rail, the Zeiss rail does not require any drilling, and therefore provides easier mounting to the user, as well as improved aesthetics.[ citation needed ] Compatible scopes have an internal dovetail rail where two or more 45-degree wedge nuts can be slid in. For example, EAW uses wedge nuts with M5 or M4 threads. [11] The scope mount is then attached using simple hand tools like a torx key or hex key to a torque between 4–5 N⋅m (3.0–3.7 lbf⋅ft). [12]

Advantages

Robust mounting
Compared to ring mounts, the rail mount can hold on to the scope in stronger recoil forces without slipping. [13]
Added stiffness
The extra material on the underside of the scope body increases stiffness and robustness. While this also increases the weight of the scope itself, it also allows for a lighter mount.
Horizontal reticle
The aiming reticle is ensured to be mounted horizontally each time.
Less chance of mounting errors
On ring mounts, overtightening of the rings is not an uncommon mounting error. [14] This can squeeze the otherwise round tube and put stress on the inner workings of the scope, resulting in either temporary or permanent damage to its mechanical and/or optical properties. In comparison, inner rail mounts are designed to be tension-free and not put stress on the main tube. After placing the wedge nuts inside the rail, the scope mount is then attached from the outside with a force from a 22.5 degree angle on each side, resulting in a self centering design.
More flexible placement
Inner rail mounts can allow for more variations in placement on the firearm. With ring mounts, the scope adjustment knobs can put restraints on the placement of the scope. In comparison, the inner rail mount gives the user more freedom to slide the scope forwards or backwards. The stepless dovetail shaped mounting surface gives more flexibility in adjustment of distance to the shooter's eye in order to get the proper eye relief.
No ring marks
When using ring mounts, marks on the scope tube can occur. [15] This can happen even when ring mounts are mounted with proper torque if for example either the ring mount or the scope tube itself are slightly over or undersized. [16] Since inner rail mounts do not have rings, ring marks are avoided.
A different look
A ringless mount gives the firearm a different look which is preferred by some[ by whom? ] as being less protrusive.
Same mount for different main tube sizes
Scopes with rail mounts do not grip around the main tube. The same rail mount can therefore be used for different scopes regardless of their main tube size. Therefore the user does not have to worry about the main tube size and compatibility with existing mounts when purchasing a new scope.

Disadvantages

Price and availability
Inner rail scope mounts are currently offered by far fewer manufacturers compared to ring mounts. For some time they have only been offered by high end European manufacturers.
Compatibility
Scopes made for other systems, such as ring mounts or other inner rail mounts, are not compatible with the Zeiss rail. Before purchase the user has to decide which system to use. These inner rails are an integral part of the scope body and can not be removed.

Scope offerings

Zeiss Varipoint series telescopic sights using the Zeiss rail system ARMS & Hunting 2010 exhibition (332-21).jpg
Zeiss Varipoint series telescopic sights using the Zeiss rail system

The Zeiss rail system can be found on some models from scope manufacturers such as Docter, Leica, Minox, Meopta and Schmidt & Bender, [9] and sometimes only on high end models. Often the manufacturer will offer these models in two variations; one for traditional ring mounts, and another for the Zeiss rail mount.

There are also examples of rifle scopes that have been sold exclusively for Zeiss rail mounts (i.e. no option for a ring mount version). These include the Zeiss Victory Diarange laser rangefinder scope [17] and the Zeiss Varipoint iC models. [18] In late 2017, [19] Blaser released their Infinity iC (illumination Control) line of scopes which also only uses the Zeiss rail system. [4]

Mount offerings

Aftermarket mounts compatible with the Zeiss rail system are offered by several well known manufacturers such as Blaser, [20] EAW, [9] Henneberger, [21] Innomount, [22] Kozap, [9] MAK, [23] Recknagel, [24] Rusan, [9] Uronen Precision, [25] Virtus, [26] and Ziegler. [27] Both two-piece or monobloc mounts are offered. [9]

Compatible mounts are offered in different configurations, depending on the mounting opportunities on the firearm receiver. Examples include Picatinny, Weaver or different types of claw or swing (pivot) mounts.

Scope height calculations

The height placement of the scope on a rifle should be matched to the stock dimensions and personal preference. In general, a higher scope mount can give better recoil control, while a lower mount can give the firearm better balance. Especially the cheek rest and scope height together play an important role for comfortable shooting. Some cheek rests or scope mounts have adjustable height.

The following section mentions relevant terminology.

Mount construction height

The construction height of a scope mount is an important factor contributing to how high the scope will sit on a rifle. "Construction height" typically refers to only the height contribution from the mount itself, and is typically provided by the mount manufacturer. Low Zeiss rail mounts typically have a construction height between 7–9 mm (0.28–0.35 in) for traditional bolt action hunting rifles, but can be up to 23 mm (0.91 in) for modern bolt and AR-style rifles.

Scope body height

A Zeiss rail system typically adds height to the scope body, but also gives the possibility for a slimmer scope mount so that the total scope height can become comparable to a traditional ring mount. The added scope body height due to the rail piece on the scope itself contributes about 5.5 mm (0.22 in) to the total height. This can be treated like a constant term which can be added to adapt traditional scope height equations for the Zeiss rail system.

Like with traditional ring mounts, the diameter of the scope tube itself also affects the distance from the bore to the crosshair. Mainly, a larger main tube will increase the total height by half the main tube difference (a 36 mm tube will thus typically sit 3 mm higher than a 30 mm tube, all else being equal). The height contribution from the scope body, that is from the bottom of the scope body to the center of the reticle, is typically provided by the scope manufacturer, along with the ~5.5 mm constant term due to the rail piece on the scope.

Other considerations

The distance from the center of bore to the top of the receiver interface is of interest for ballistics calculations, like when constructing a ballistic table.

Competing standards

Competing standards to the Zeiss rail include the Swarovski SR rail and Schmidt & Bender Convex rail. The three systems are not compatible. While the Zeiss rail has a stepless dovetail shaped mounting surface, the Swarovski SR rail has a finely toothed rail, and the S&B Convex has a smooth convex rail.

Swarovski applied for patent on their SR rail system in 2002, [28] [29] [30] and introduced to the product to the market in late 2005. [31] The Swarovski SR rail is also used by Kahles, a Swarovski subsidiary. [32]

The Convex rail has been offered by Schmidt & Bender since at least 2005, [33] [34] and has also been marketed under the name LMC (Light Metal with Convex rail). [7] Contrary to the Zeiss and Swarovski rails, which ensure a levelled reticle, the S&B Convex rail instead allows the user to tilt the reticle up to 1° (60  moa; 17.5  mrad) to the left or right. [35] Since 2016, Schmidt & Bender has also offered the Zeiss rail system as an option on some of their hunting scope sights under the name LMZ (Light Metal with Z-rail). [7]

Related Research Articles

<span class="mw-page-title-main">Binoculars</span> Pair of telescopes mounted side-by-side

Binoculars or field glasses are two refracting telescopes mounted side-by-side and aligned to point in the same direction, allowing the viewer to use both eyes when viewing distant objects. Most binoculars are sized to be held using both hands, although sizes vary widely from opera glasses to large pedestal-mounted military models.

<span class="mw-page-title-main">Accuracy International AWM</span> Sniper rifle

The Accuracy International AWM is a bolt-action sniper rifle manufactured by Accuracy International designed for magnum rifle cartridges. The Accuracy International AWM is also unofficially known as the AWSM, which typically denotes AWM rifles chambered in .338 Lapua Magnum.

The Accuracy International Arctic Warfare rifle is a bolt-action sniper rifle designed and manufactured by the British company Accuracy International. It has proved popular as a civilian, police, and military rifle since its introduction in the 1980s. The rifles have some features that improve performance in very cold conditions without impairing operation in less extreme conditions.

<span class="mw-page-title-main">Telescopic sight</span> Sighting device for firearms

A telescopic sight, commonly called a scope informally, is an optical sighting device based on a refracting telescope. It is equipped with some form of a referencing pattern – known as a reticle – mounted in a focally appropriate position in its optical system to provide an accurate point of aim. Telescopic sights are used with all types of systems that require magnification in addition to reliable visual aiming, as opposed to non-magnifying iron sights, reflector (reflex) sights, holographic sights or laser sights, and are most commonly found on long-barrel firearms, particularly rifles, usually via a scope mount. The optical components may be combined with optoelectronics to add night vision or smart device features.

<span class="mw-page-title-main">Milliradian</span> Angular measurement, thousandth of a radian

A milliradian is an SI derived unit for angular measurement which is defined as a thousandth of a radian (0.001 radian). Milliradians are used in adjustment of firearm sights by adjusting the angle of the sight compared to the barrel. Milliradians are also used for comparing shot groupings, or to compare the difficulty of hitting different sized shooting targets at different distances. When using a scope with both mrad adjustment and a reticle with mrad markings, the shooter can use the reticle as a ruler to count the number of mrads a shot was off-target, which directly translates to the sight adjustment needed to hit the target with a follow up shot. Optics with mrad markings in the reticle can also be used to make a range estimation of a known size target, or vice versa, to determine a target size if the distance is known, a practice called "milling".

<span class="mw-page-title-main">Bor rifle</span> Sniper rifle

The Bor is a Polish bolt-action 7.62×51mm NATO and .338 Lapua Magnum caliber sniper rifle. The weapon received the code name Alex during development, after the name of the lead designer Aleksander Leżucha, creator of the 12.7×99mm NATO Wilk anti-materiel rifle. After the development phase, the rifle received the military designation 'Bor'.

<span class="mw-page-title-main">Blaser R93</span> Precision rifle

The Blaser R93 is a straight-pull action precision rifle offered in a multitude of calibers and barrel lengths manufactured by the German firearms manufacturer Blaser. Designed by Blasers' designer Mr. Meinhard Zeh in 1993, it had a number of features rare on modern hunting rifles, including a manual cocking system and a proprietary Blaser saddle scope mount for mounting the optic directly to the quick-change barrel

<span class="mw-page-title-main">I.O.R.</span>

Întreprinderea Optică Română, often abbreviated by the acronym IOR, is a major optics company established in 1936 in Bucharest. IOR produces military and civilian-grade optics and associated equipment for export and domestic production. The company is known in North America particularly for its riflescopes, binoculars and other sporting optics, which often accompany Romanian military equipment sold on the North American market, such as the PSL rifle.

Schmidt & Bender is a German company specialized in producing high end telescopic sights for hunting, sports, law enforcement and military arms.

<span class="mw-page-title-main">FR F1</span> Sniper rifle

The FR F1 is a French sniper rifle manufactured by the Manufacture d'armes de Saint-Étienne (MAS); one of several government-owned arms factories in France. The FR F1 was France's first purpose-built precision rifle for sharpshooters. Introduced in 1966, the rifle was in use with the French Armed Forces until 1989 when it was replaced by the FR F2.

<span class="mw-page-title-main">Brügger & Thomet APR</span> Sniper rifle

The APR is family of Swiss bolt-action sniper rifles designed in 2003 as a further evolution of the French PGM Précision rifles by the Thun-based Brügger & Thomet company.

<span class="mw-page-title-main">Red dot sight</span> Type of firearm reflector sight

A red dot sight is a common classification for a type of non-magnifying reflector sight for firearms, and other devices that require aiming, that gives the user a point of aim in the form of an illuminated red dot. A standard design uses a red light-emitting diode (LED) at the focus of collimating optics which generates a dot-style illuminated reticle that stays in alignment with the weapon the sight is attached to, regardless of eye position. They are considered to be fast-acquisition and easy-to-use gun sights for civilian target shooting, hunting, or in police and military applications. Aside from firearm applications, they are also used on cameras and telescopes. On cameras they are used to photograph flying aircraft, birds in flight, and other distant, quickly moving subjects. Telescopes have a narrow field of view and therefore are often equipped with a secondary "finder scope" such as a red dot sight.

<span class="mw-page-title-main">Blaser R8</span> Straight-pull rifle

The Blaser R8 is a German straight-pull rifle known for its radially locking bolt system, modularity and its barrel mounted scope mount manufactured by Blaser. The rifle also features a manual cocking system and a direct trigger. In 2015 there had been produced more than 100,000 complete Blaser R8 rifles.

<span class="mw-page-title-main">Blaser</span> German firearms manufacturer

Blaser Jagdwaffen GmbH is a German firearms manufacturer of high-end shotguns and rifles both for the hunting and tactical market. It was founded in 1957 by Horst Blaser, developing the drilling Blaser Diplomat. In September 2008, Blaser established a headquarters in San Antonio, Texas.

The PSL is a Romanian military designated marksman rifle. It is also called PSL-54C, Romak III, FPK and SSG-97. Though similar in appearance, mission, and specifications to the SVD Dragunov, the PSL rifle is, mechanically speaking, completely different as it is based on the AKM assault rifle - with its internals simply being scaled up to accommodate the more powerful 7.62×54mmR cartridge.

<span class="mw-page-title-main">UIT rail</span>

The UIT rail, also known as Anschutz rail, is a standard used for mounting slings and other gun accessories in competition shooting, and is essentially a T-slot track shaped aluminium extrusion profile accepting attachments in the form of T-slot nuts, or similar.

<span class="mw-page-title-main">Dovetail rail</span> Type of attachment rail on firearms

A dovetail rail or dovetail mount can refer to several types of sliding rail system found on firearms, primarily for mounting telescopic sights. Colloquially, the term dovetail rail usually refer to any straight mounting bracket with an inverted trapezoid (dovetail) cross-section running parallel to the bore for mounting a scope or diopter sight to a rifle. These are sometimes also called "tip-off" mounts, and allow the user to easily take on or off the sight. Dovetail mount can also refer to a dovetail track running perpendicular to the bore.

Nightforce Optics, Inc. is an American manufacturer of high-end telescopic sights, spotting scopes and mounting accessories, based in Lavonia, Georgia with factory headquarters in Orofino, Idaho. Established in 1992, the company is the optic subsidiary of Lightforce Performance Lighting, an Australian manufacturer of specialty lighting products based in Hindmarsh, South Australia.

Lynx Rifles is a brand of high-end straight pull rifles manufactured by Finnish firearms manufacturerer Pirkan ASE both for the hunting, sport and tactical market. All rifles are handmade in Finland and feature a biathlon style cross bolt straight pull system consisting of relatively few parts.

<span class="mw-page-title-main">Scope mount</span> Part for mounting a scope sight to a firearm

Scope mounts are used to attach telescopic sights or other types of sights to firearms. The scope sight itself is usually made for only one of two main types of mounts, which can be classified as scopes for ring mounts, for example a 30 mm tube, or scopes for rail mounts, like for example the Zeiss rail. Words such as mounts and bases are used somewhat loosely, and can refer to several different parts which are either used together or in place of each other as ways to mount optical sights to firearms.

References

  1. 1 2 ZEISS Hunting Catalogue 2018 "ZEISS revolutionised riflescope mounting? The introduction of the ZEISS inner rail in 1990 meant that gunsmiths no longer needed to perform the laborious tasks of gluing and drilling the mounting components to attach them to the riflescope. Since the patent expired in 2008, the ZEISS inner rail is now offered by almost all prominent European manufacturers."
  2. ↑ 100 Years of Carl Zeiss riflescopes 1904 – 2004 Milestones and Pioneering Achievements, page 2
  3. ↑ German patent No. 38 20 471 granted 19 March 1992
  4. 1 2 Blaser Infinity 2.8-20x50 IC vs Swarovski Z8i 2-16x50 - Rifles Scopes Expert Every Blaser [scope] comes with a Zeiss ZM/VM mounting rail [...]
  5. ↑ Nikon Sport Optics & Hunting Catalogue 2017 "Rail mount models (Zeiss Inner Rail Standard) are available (1-4x24 IL ZR and 2.5-10x50SF IL ZR"
  6. ↑ Docter to Noblex - Optics info
  7. 1 2 3 Schmidt & Bender – Main catalog 2016
  8. ↑ Nighthunter Xtreme Riflescope Instruction Manual "Rail models work with standard rail bases for “Z” or Zeiss rails."
  9. 1 2 3 4 5 6 7 Zeiss ZM / VM Rifle Scope mounting rail – Optics info
  10. ↑ Mount rail
  11. ↑ EAW Spare Parts and Tools catalogue 2017, Keilmutter/clamping block page 3 and 5
  12. ↑ Zeiss ZM / VM rail Mounts - Optics-trade
  13. ↑ Zeiss ZM/VM rail mounting of Rifle Scopes (YouTube)
  14. ↑ Two Common Scope-Mounting Mistakes – Shooting Times
  15. ↑ larrywillis.com – Mounting a Scope
  16. ↑ buckmasters.com – Advanced Scope Mounting
  17. ↑ Victory Diarange riflescopes from ZEISS – with integrated laser rangefinder | ZEISS United States
  18. ↑ Victory Varipoint iC riflescopes from ZEISS – with illumination control iC | ZEISS International
  19. ↑ Blaser Infinity: three new riflescopes for hunters - all4shooters
  20. ↑ Alan Rhone Ltd – Contessa | QD Rail for Blaser
  21. ↑ Henneberger GmbH & Co. KG – Oberteile für Zeiss-Schiene
  22. ↑ Scope Innomount scope mounts by Innogun
  23. ↑ Mounts HELIX | Merkel
  24. ↑ Alan Rhone Ltd – Recknagel | Other Mounts
  25. ↑ Uronen Precision Secondary Sight Mount for the C-More RTS2 -The Firearm Blog
  26. ↑ Galerie virtus-scopemounts.com – Zeiss Innenschiene
  27. ↑ Alan Rhone Ltd – Ziegler ZP Mounts
  28. ↑ Patent AT480748T Application filed 9 June 2002 by Swarovski Optik]
  29. ↑ Patent US6901692B2 Application granted 7 June 2005]
  30. ↑ Patent DE50214644D1 Application granted 21 October 2010]
  31. ↑ Swarovski catalog October 2005
  32. ↑ Scopes and Mounting Systems | Hunt Forever
  33. ↑ Wild und hund, das jagdmagazin zeit 1894, 19/2005, Sieben auf einen Streich, page 92. "Schmidt & Bender Zenith 2,5-10x56 FD [...] LM mit Convex-Innenschiene"
  34. ↑ HEYM Pivot mount catalogue (10.2003), mounting solutions for Schmidt & Bender convex rail (Convex-Schiene)
  35. ↑ Schmidt & Bender catalogue "The convex hollow rail. Our hollow rail with a convex outer surface, offered on all Zenith models, is distinguished by elegant lines, and allows the use of reliable slide-in mount fasteners. This innovative rail also makes it possible to tilt the scope up to 1° to the left or to the right."
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.