 | |||||||||||||||
 A Baldwin 2-4-2T locomotive, used on the private track in Raahe, Finland, later bought by Finnish State Railways | |||||||||||||||
| |||||||||||||||
| |||||||||||||||
| |||||||||||||||
Under the Whyte notation for the classification of steam locomotives, 2-4-2 represents the wheel arrangement of two leading wheels on one axle, four powered and coupled driving wheels on two axles and two trailing wheels on one axle. The type is sometimes named Columbia after a Baldwin 2-4-2 locomotive was showcased at the 1893 World's Columbian Exposition held at Chicago, Illinois.
The wheel arrangement was widely used on passenger tank locomotives during the last three decades of the nineteenth and the first decade of the twentieth centuries. The vast majority of 2-4-2 locomotives were tank engines, designated 2-4-2T. The symmetrical wheel arrangement was well suited for a tank locomotive that is used to work in either direction.
When the leading and trailing wheels are in swivelling trucks, the equivalent UIC classification is 1'B1'.
While a number of 2-4-2 tender locomotives were built, larger tender locomotive types soon became dominant.
In 1899, the Walvis Bay Railway in the British territory of Walvis Bay, a Cape of Good Hope exclave in Deutsch-Südwest-Afrika (German South West Africa), placed a single tank locomotive in service. The engine, named Hope and built by Kerr, Stuart and Company, remained in service until 1904 when operations on the railway were suspended. The line was abandoned in 1905, partly as a result of being buried by a sandstorm. [1] [2]
A 2-4-2 tank locomotive, built by Baldwin Locomotive Works in 1899 and used on the private Raahe track in Finland, was later bought by the Finnish State Railways.
In 1877, when the New Zealand Railways needed new motive power, the road turned to the Rogers Locomotive Works who supplied eight 2-4-2 tender locomotives between 1877 and 1879 that were designated the "K" class. These were the first American-built locomotives in New Zealand and proved to be quite successful.
Three of these locomotives have been preserved. No. K88 Washington was used on the first through train between Christchurch and Dunedin in 1877. After fifty years of service, Washington was dumped in the Oreti River, Southland, as a flood protection measure. In 1974, the locomotive was exhumed from her watery grave and, over the next eight years, restored to full active service.
Sister locomotives numbers K92 and K94 have also been salvaged from the Oreti river. No. K92 has been restored to full active service and has re-established her position on the Kingston Flyer train, which was made famous by the K class at the end of the 19th century.
The earliest British use of the 2-4-2 wheel arrangement appears to have been no. 21 White Raven, supplied to the St Helens Railway by James Cross of Sutton Works in 1863. It was soon rebuilt as a 2-4-0 tender locomotive and eventually passed into the stock of the London and North Western Railway (L&NWR). [3]
In 1864, Robert Sinclair of the Great Eastern Railway designed the first of six 2-4-2 tank classes built by the railway, eventually totalling 262 locomotives by 1912.
Francis Webb of the London and North Western Railway also designed two 2-4-2 classes which eventually totaled 380 locomotives, built between 1879 and 1898.
Other railway companies that built large numbers of the type included the Lancashire and Yorkshire Railway (L&YR) with 330 locomotives built between 1889 and 1911, the North Eastern Railway with 60 locomotives built between 1886 and 1892 and the Manchester, Sheffield and Lincolnshire Railway with 49 locomotives built between 1889 and 1898. One of John Aspinall's Class 5 locomotives, built for the L&YR in 1889, is preserved at the National Railway Museum, York.
The tank-type 2-4-2T was common in the U.S. around the dawn of the twentieth century in both suburban passenger service and on logging railroads. The Baldwin Locomotive Works built a demonstrator tender type engine which was displayed at the Columbian Exposition of 1893. This led to the type's name. This locomotive featured ambitious seven foot tall driving wheels, and was one of the first tender-equipped locomotives with a trailing truck. This freed the firebox from having to sit narrowly between, or above, the drive wheels, and was a very influential design.
This inspired three major U.S. railroads (Atlantic Coast Line, Burlington and Reading) to purchase a few of the type. But the two-wheeled lead truck was never well-suited to high speed service on far-flung North American rails. Some were converted to 4-4-2 Atlantic types and others were converted to 4-6-0 Ten Wheelers. The display locomotive was donated to Columbia University. In one respect, however, it was a success. A great many Atlantic types would follow, most based on the design. [4]
The character Sammy from Sammy the Shunter is based on the United Kingdom design of the 2-4-2 engine. Two engines named Pete, and Georgia in the 1991 film The Little Engine That Could have this type of wheel arrangement. Albert from The Railway Series has this wheel arrangement.
The Lionel Corporation used the 2-4-2 configuration in many of its O-27 locomotives. [5] In the United States, this may be the most famous usage of a 2-4-2 configuration locomotive.
Under the Whyte notation for the classification of steam locomotives, 4-8-2 represents the wheel arrangement of four leading wheels, eight powered and coupled driving wheels and two trailing wheels. This type of steam locomotive is commonly known as the Mountain type, though the New York Central Railroad used the name Mohawk for their 4-8-2s.
Under the Whyte notation for the classification of steam locomotives, a 2-10-4 locomotive has two leading wheels on one axle, usually in a Bissel truck, ten coupled driving wheels on five axles, and four trailing wheels on two axles, usually in a bogie. These were referred to as the Texas type in most of the United States, the Colorado type on the Burlington Route, and the Selkirk type in Canada.
Under the Whyte notation for the classification of steam locomotives, 2-6-0 represents the wheel arrangement of two leading wheels on one axle, usually in a leading truck, six powered and coupled driving wheels on three axles and no trailing wheels. This arrangement is commonly called a Mogul.
Under the Whyte notation for the classification of steam locomotives, 2-8-2 represents the wheel arrangement of two leading wheels on one axle, usually in a leading truck, eight powered and coupled driving wheels on four axles and two trailing wheels on one axle, usually in a trailing truck. This configuration of steam locomotive is most often referred to as a Mikado, frequently shortened to Mike.
Under the Whyte notation for the classification of steam locomotives, 0-10-0 represents the wheel arrangement of no leading wheels, ten powered and coupled driving wheels on five axles and no trailing wheels. In the United Kingdom, this type is known as a Decapod, a name which is applied to 2-10-0 types in the United States. In the United States, the type is known as ten-coupled.
Under the Whyte notation for the classification of steam locomotives, a 2-6-4 locomotive has two leading wheels, six coupled driving wheels and four trailing wheels.
Under the Whyte notation for the classification of steam locomotives, 0-8-0 represents the wheel arrangement of no leading wheels, eight powered and coupled driving wheels on four axles and no trailing wheels. Locomotives of this type are also referred to as eight coupled.
Under the Whyte notation for the classification of steam locomotives, 2-6-2 represents the wheel arrangement of two leading wheels, six coupled driving wheels and two trailing wheels. This arrangement is commonly called a Prairie.
Under the Whyte notation for the classification of steam locomotives, 4-2-4 represents the wheel arrangement of four leading wheels on two axles, two powered driving wheels on one axle, and four trailing wheels on two axles.
Under the Whyte notation for the classification of steam locomotives, 0-8-2 represents the wheel arrangement of no leading wheels, eight powered and coupled driving wheels on four axles, and two trailing wheels on one axle.
Under the Whyte notation for the classification of steam locomotives, 2-4-0 represents the wheel arrangement of two leading wheels on one axle, four powered and coupled driving wheels on two axles and no trailing wheels. In most of North America it became known as a Porter.
Under the Whyte notation for the classification of steam locomotives, 0-4-2 represents the wheel arrangement with no leading wheels, four powered and coupled driving wheels on two axles and two trailing wheels on one axle. While the first locomotives of this wheel arrangement were tender engines, the configuration was later often used for tank engines, which is noted by adding letter suffixes to the configuration, such as 0-4-2T for a conventional side-tank locomotive, 0-4-2ST for a saddle-tank locomotive, 0-4-2WT for a well-tank locomotive and 0-4-2RT for a rack-equipped tank locomotive.
Under the Whyte notation for the classification of steam locomotives, 0-6-2 represents the wheel arrangement of no leading wheels, six powered and coupled driving wheels on three axles and two trailing wheels on one axle.
Under the Whyte notation for the classification of steam locomotives by wheel arrangement, 4-10-2 represents the arrangement of four leading wheels, ten powered and coupled driving wheels and two trailing wheels. In South Africa, where the wheel arrangement was first used, the type was known as a Reid Tenwheeler. In the United States of America it was known as a Southern Pacific on the Southern Pacific Railroad and as an Overland on the Union Pacific Railroad.
The South African Railways Class 21 2-10-4 of 1937 was a class of steam locomotives used in South Africa.
The South African Railways Class H 4-10-2T, introduced in 1899, was a steam locomotive from the pre-Union era in the Colony of Natal.
The Central South African Railways Class E 4-10-2T of 1901 was a South African steam locomotive from the pre-Union era in Transvaal.
The Natal Government Railways 4-6-2TT Havelock of 1888 was a South African steam locomotive from the pre-Union era in the Natal Colony.
The South African type FT tender was a steam locomotive tender.
The South African type JV tender was a steam locomotive tender.
