CANSA C.4

Last updated
C.4
Role Trainer/tourer
National origin Italy
ManufacturerConstruzioni Aeonautiche Novaresi S.A (CANSA)
First flight1942

The CANSA C.4 was a single engine, open cockpit, tandem seat training aircraft and tourer flown in Italy in 1942.

Contents

Design and development

The last of a series of three CANSA trainer designs, preceded by the C.5 and C.6, the C.4 was the only monoplane. It had a low, straight tapered wing; no flaps were fitted. The empennage was conventional, with the tailplane mounted on top of the fuselage. The elevators were split so that the unbalanced rudder, which extended to the bottom of the fuselage, could move between them. The fin and rudder together were straight edged and round topped. [1]

The fabric covered fuselage was flat sided, with a rounded decking. The two occupants sat in separate cockpits, the forward one at the wing leading edge and the second close behind over mid-chord. The cockpits were open but fitted with windscreens and short sidescreens. The C.4 was powered by a 67 kW (90 hp), 4-cylinder inline, air-cooled, inverted CANSA C.80 engine. It had a fixed, conventional undercarriage with a tailskid. [1]

The C.4 was built as both a training aircraft and a tourer [1] but production numbers are not known.

Specifications

Data from Italian Civil and Military Aircraft 1930-1945 [1]

General characteristics

Performance

Related Research Articles

<span class="mw-page-title-main">RWD 10</span> Type of aircraft

The RWD-10 was a Polish aerobatics sports plane, single-seat parasol wing monoplane, used from 1933 to 1939 and constructed by the RWD team.

<span class="mw-page-title-main">Parnall Imp</span> Type of aircraft

The Parnall Imp was an unusual single-engined, two-seat British biplane built in 1927. It had a straight cantilever lower wing which supported the markedly swept upper wing. Only one was built.

The Pasotti F.6 Airone was a low-wing, twin-engined, wooden, four seat civil aircraft built in Italy in the 1950s. Production was considered but only one was completed.

<span class="mw-page-title-main">IAR-22</span> Type of aircraft

The IAR-22 was a single engine basic trainer built in Romania in about 1934. It was a low-wing monoplane with two seats in tandem and a fixed conventional undercarriage.

<span class="mw-page-title-main">Morane-Saulnier MS.341</span> Type of aircraft

The Morane-Saulnier MS.341 was a single engine parasol wing training and touring aircraft built in France in the mid-1930s. It had two open cockpits in tandem and was sold to private owners, clubs and the Armée de l'Air.

<span class="mw-page-title-main">Praga E-40</span> Type of aircraft

The Praga E-40 was a single engine, two seat, biplane basic trainer, built in Czechoslovakia in the mid-1930s.

The Gardan GY-120 was a single engine, parasol wing ultralight seating two in tandem, designed and built in France in the 1980s. It did not go into production.

<span class="mw-page-title-main">CANSA FC.12</span> Type of aircraft

The CANSA FC.12 was a single engine monoplane ground attack aircraft developed in Italy around 1940. A crew of two were seated in tandem. Only ten production aircraft were built.

<span class="mw-page-title-main">CANSA FC.20</span> Type of aircraft

The CANSA FC.20 was a twin engine reconnaissance bomber/ground attack monoplane designed and built in Italy in 1941. Several versions with different armament and engines were flown but only the FC.20bis ground attack variant reached squadron service, in very small numbers, before the 1943 armistice.

The CNA Eta was a single engine Italian light aircraft, flown in the mid-1930s, that set one and two seat world records as both a landplane and a seaplane. Only one or two were built.

<span class="mw-page-title-main">SAIMAN LB.2</span> Type of aircraft

The SAIMAN LB.2 was an unconventional Italian two seat cabin side by side sport aircraft designed around 1937, with a single pusher configuration engine, twin tail booms and an early tricycle undercarriage.

The Bonomi BS.19 Alca was a single seat, tractor configuration motor glider, designed and built in Italy shortly before World War II. It had an unusual retractable undercarriage used only for take-offs. Only one was built.

The Teichfuss Cicogna was an Italian tailless single-seat motor glider designed by Luigi Teichfuss and flown in 1936.

<span class="mw-page-title-main">Caudron C.180</span> Type of aircraft

The Caudron C.180 was an all-metal, three-engine French ten-seat passenger aircraft, flown about 1930. Only one was built.

The Caudron C.99 was a French light bomber and reconnaissance aircraft. The only example flew with different engines in the mid-1920s.

<span class="mw-page-title-main">Caudron C.67</span> French single-seat airplane

The Caudron C.67 was a simple single seat biplane with a low powered engine. It was built and flown in France in 1922.

<span class="mw-page-title-main">Caudron C.43</span> Type of aircraft

The Caudron C.43 was the first French five-engined aircraft, a biplane intended for passenger transport or military use and multi-engined for safety. A development of the three-engined Caudron C.39, it had one tractor configuration engine in the nose and two push-pull pairs between the wings. It was capable of carrying eight passengers but was not developed.

The Régnier 12 was a 1930s Belgian touring aircraft offering variants with different engines and seating plans. Only one was built.

The Caproni Ca.66 and Caproni Ca.67 were Italian night bomber aircraft designed to re-equip the post-World War I Regia Aeronautica.

The Jones S-125 was a U.S. two-seat sport aircraft intended for large-scale production, though only one was completed.

References

  1. 1 2 3 4 Thompson, Jonathan (1963). Italian Civil and Military Aircraft 1930-1945 . Fallbrook, California: Aero Publishers, Inc. p.  47.