Froebe helicopter

Last updated

The Froebe Helicopter was the first helicopter to be built and flown in Canada. [1] It was built by brothers Doug, Theodore and Nicholas Froebe in the 1930s.

Contents

Marker near Homewood, Manitoba Froebe helicopter marker.jpg
Marker near Homewood, Manitoba

The machine was constructed on a custom-made steel tubular frame using spare parts and equipment from automobiles, farm machinery and elsewhere. Fitted with a de Havilland Gipsy aero engine, it had twin concentric contra-rotating rotors of stainless steel tubing with fabric covering and with full cyclic and collective pitch control. [2] [3]

The 98 hp available from the engine proved inadequate, but several test flights were made, the machine showing severe vibration. Work was then interrupted by the outbreak of the Second World War.

The helicopter was stored in a granary and forgotten. A later generation of the Froebe family rediscovered it and donated it to the Royal Aviation Museum of Western Canada.

Development

The Froebe family moved from Chatsworth, Illinois to the Homewood area in 1921. In 1927, the Froebe brothers (Nicolas, Theodore and Douglas) purchased and assembled a Heath Parasol fixed-wing aircraft kit and learned to fly. They later purchased and restored another fixed-wing aircraft and flew it until 1933, when it was damaged. In the winter of 1936–1937, the brothers traveled to Oakland, California to learn about rotary-wing aircraft and commenced construction of their own helicopter in 1937. The first short test flight was carried out on December 20, 1938. Vibration problems and bearing failures occurred after only a few more hours of test flights of up to five feet in altitude and 50 feet distance, so experiments were discontinued in early 1939.

Theodore Froebe was killed in the crash of a Heath Parasol in 1943, and Nicolas died in 1959 while crop dusting. Douglas Froebe moved to California, but returned to Homewood to carry out experiments with another novel aircraft design. [4]

Specifications

Related Research Articles

<span class="mw-page-title-main">Aircraft</span> Vehicle or machine that is able to fly by gaining support from the air

An aircraft is a vehicle that is able to fly by gaining support from the air. It counters the force of gravity by using either static lift or the dynamic lift of an airfoil, or, in a few cases, direct downward thrust from its engines. Common examples of aircraft include airplanes, helicopters, airships, gliders, paramotors, and hot air balloons.

<span class="mw-page-title-main">Rotary engine</span> Internal combustion engine with cylinders rotating around a stationary crankshaft

The rotary engine is an early type of internal combustion engine, usually designed with an odd number of cylinders per row in a radial configuration. The engine's crankshaft remained stationary in operation, while the entire crankcase and its attached cylinders rotated around it as a unit. Its main application was in aviation, although it also saw use in a few early motorcycles and automobiles.

A vertical take-off and landing (VTOL) aircraft is one that can take off and land vertically without relying on a runway. This classification can include a variety of types of aircraft including helicopters as well as thrust-vectoring fixed-wing aircraft and other hybrid aircraft with powered rotors such as cyclogyros/cyclocopters and gyrodynes.

The CarterCopter is an experimental compound autogyro developed by Carter Aviation Technologies in the United States to demonstrate slowed rotor technology. On 17 June 2005, the CarterCopter became the first rotorcraft to achieve mu-1 (μ=1), an equal ratio of airspeed to rotor tip speed, but crashed on the next flight and has been inoperable since. It is being replaced by the Carter Personal Air Vehicle.

<span class="mw-page-title-main">Ikarus Aero 2</span> Type of aircraft

The Ikarus Aero 2 was a piston-engined military trainer aircraft built in Yugoslavia in the years following World War II, although the design pre-dated the war.

<span class="mw-page-title-main">RWD 17</span> Type of aircraft

The RWD 17 was a Polish aerobatics-trainer aircraft of 1937, parasol wing monoplane, constructed by the RWD team.

<span class="mw-page-title-main">Saunders-Roe Skeeter</span> Type of aircraft

The Saunders-Roe Skeeter was a two-seat training and scout helicopter that was developed and produced by British manufacturer Saunders-Roe ("Saro") of Cowes and Southampton, in the United Kingdom.

de Havilland DH.60 Moth 1925 utility aircraft family

The de Havilland DH.60 Moth is a 1920s British two-seat touring and training aircraft that was developed into a series of aircraft by the de Havilland Aircraft Company.

<span class="mw-page-title-main">Rotorcraft</span> Heavier-than-air aircraft which generates lift over rotating wings

A rotorcraft or rotary-wing aircraft is a heavier-than-air aircraft with rotary wings or rotor blades, which generate lift by rotating around a vertical mast. Several rotor blades mounted on a single mast are referred to as a rotor. The International Civil Aviation Organization (ICAO) defines a rotorcraft as "supported in flight by the reactions of the air on one or more rotors".

<span class="mw-page-title-main">Propeller (aeronautics)</span> Aircraft propulsion component

In aeronautics, an aircraft propeller, also called an airscrew, converts rotary motion from an engine or other power source into a swirling slipstream which pushes the propeller forwards or backwards. It comprises a rotating power-driven hub, to which are attached several radial airfoil-section blades such that the whole assembly rotates about a longitudinal axis. The blade pitch may be fixed, manually variable to a few set positions, or of the automatically variable "constant-speed" type.

<span class="mw-page-title-main">Helicopter</span> Type of rotorcraft in which lift and thrust are supplied by horizontally-spinning rotors

A helicopter is a type of rotorcraft in which lift and thrust are supplied by horizontally spinning rotors. This allows the helicopter to take off and land vertically, to hover, and to fly forward, backward and laterally. These attributes allow helicopters to be used in congested or isolated areas where fixed-wing aircraft and many forms of short take-off and landing (STOL) or short take-off and vertical landing (STOVL) aircraft cannot perform without a runway.

<span class="mw-page-title-main">Napier Eland</span> 1950s British aircraft turboshaft engine

The Napier Eland is a British turboshaft or turboprop gas-turbine engine built by Napier & Son in the early 1950s. Production of the Eland ceased in 1961 when the Napier company was taken over by Rolls-Royce.

<span class="mw-page-title-main">Fairey FB-1 Gyrodyne</span> Type of aircraft

The Fairey FB-1 Gyrodyne is an experimental British rotorcraft that used single lifting rotor and a tractor propeller mounted on the tip of the starboard stub wing to provide both propulsion and anti-torque reaction.

<span class="mw-page-title-main">Bratukhin Omega</span> Type of aircraft

The Bratukhin Omega was an early Soviet helicopter, the first product of a new Soviet design bureau, OKB-3 that was created from within TsAGI specifically to develop rotary-wing aircraft. Bratukhin's design was a side-by-side twin rotor machine, with each rotor carried on a long outrigger truss. The Omega's rotors were each powered by a separate engine carried in a nacelle also at the end of the truss. Captive trials commenced in August 1941 and revealed severe problems with engine vibration and overheating. Before these could be addressed, however, OKB-3 was evacuated ahead of the German advance into the Soviet Union.

<span class="mw-page-title-main">Bréguet-Richet Gyroplane</span> Type of aircraft

The Bréguet-Richet Gyroplane was an early French experimental quadcopter rotary-wing aircraft developed by Bréguet Aviation.

<span class="mw-page-title-main">Berliner Helicopter</span> Type of aircraft

The Berliner Helicopter was a series of experimental helicopters built by Henry Berliner between 1922 and 1925. The helicopters had only limited controllability but were the most significant step forward in helicopter design in the US, until the production of the Vought-Sikorsky VS-300 helicopter in 1940. The 1922 flights of the Berliner and the de Bothezat H1 were the first by manned helicopters.

<span class="mw-page-title-main">Hafner A.R.III Gyroplane</span> Type of aircraft

The Hafner A.R.III Gyroplane was a British 1930s experimental autogyro designed by Austrian Raoul Hafner, and built by the A.R.III Construction Company at Denham, Buckinghamshire.

<span class="mw-page-title-main">Miles Hawk Speed Six</span> 1930s British monoplane

The Miles Hawk Speed Six was a 1930s British two-seat light monoplane, developed by Miles Aircraft from the Miles Hawk Major by fitting the longer and more powerful Gipsy Six engine and removing the forward crew member.

<span class="mw-page-title-main">Petróczy-Kármán-Žurovec</span> Hungarian and Czech aeronautical engineers

Petróczy, Kármán and Žurovec were Hungarian and Czech engineers who worked on helicopter development immediately before and during World War I in Budapest. Between them they produced two experimental prototypes, the PKZ-1 and PKZ-2, intended to replace the dangerous hydrogen-filled observation balloons then in use. As such, these craft were tethered on long cables and were not intended to fly freely. After the war other engineers, notably Oszkár von Asboth, further developed the design.

References

  1. Render, Shirley (15 November 2007). "World's Second Helicopter Built in Manitoba in 1937-38". Helicopters Magazine.
  2. "Froebe Helicopter: Before Sikorksy came the Froebe Brothers". Royal Aviation Museum of Western Canada.
  3. Bill Zuk (31 January 2013). "Canada' Rotary Wing Heritage". Canadian Aviation Historical Society. Archived from the original on 7 September 2015. Retrieved 10 November 2015.
  4. Vertical Rewind:The Flying Frobes, retrieved August 22, 2019