Freedom Lite SS-11 Skywatch

Last updated

SS-11 Skywatch
Skywatch SS11 C-IGHL 06.JPG
Role Ultralight aircraft
National origin Canada
Manufacturer Freedom Lite
Legend Lite
Introduction1996
StatusProduction completed
Number built15 (2001)
Developed from Spectrum Beaver RX650
Skywatch SS11 on skis Skywatch SS11 on skis.JPG
Skywatch SS11 on skis
Skywatch SS11 with doors open Skywatch SS11 C-IGHL 01.JPG
Skywatch SS11 with doors open
Skywatch SS11 showing doors and fuselage shape Skywatch SS11 C-IGHL 03.JPG
Skywatch SS11 showing doors and fuselage shape
Skywatch SS11 showing Rotax 582 engine and radiator mounting Skywatch SS11 C-IGHL 07.JPG
Skywatch SS11 showing Rotax 582 engine and radiator mounting
Skywatch SS11 sitting on its tail while unladen Skywatch SS11 C-IGHL 02.JPG
Skywatch SS11 sitting on its tail while unladen

The Freedom Lite SS-11 Skywatch (also called the Skywatch SS11) is a Canadian ultralight aircraft that was produced by Freedom Lite of Walton, Ontario and later by Legend Lite of New Hamburg, Ontario, introduced in 1996. When it was available the aircraft was supplied as a complete ready-to-fly-aircraft, or as a kit for amateur construction. [1] [2]

Contents

In Canada the SS-11 is a Transport Canada-accepted Advanced Ultra-Light Aeroplane [3]

Design and development

Developed from the Spectrum Beaver RX650, the SS-11 Skywatch features a strut-braced high-wing, a two-seats-in-tandem enclosed cockpit accessed through upwards opening doors supported by folding struts, fixed tricycle landing gear with wheel pants, a small auxiliary tail wheel and a single engine in pusher configuration. [1]

In improving the RX650 the company made 186 design changes to produce the SS-11. The most obvious change was the move from Dacron envelopes for the wings to doped aircraft fabric covering. [2]

The aircraft is made from 4130 steel and aluminum tubing, plus fibreglass, with its flying surfaces covered with doped aircraft fabric. The cockpit cage is all 4130 steel, while the tail boom tube is aluminum. Its 33.00 ft (10.1 m) span wing lacks flaps and has a wing area of 155.0 sq ft (14.40 m2). The wing is built with an aluminum structure, with an I-beam spar and stamped ribs. The SS-11 has folding wings and a folding tail as well, to allow ground transport or storage. Folding the wings can be accomplished by one person in a few minutes, with the struts supporting the wing. [1] [2]

The nose wheel is steerable, dual controls were factory standard, while the vertically-hinged cockpit doors were an option. With no occupants the aircraft sits on its tail. [1] [2]

The SS-11's acceptable installed engine power range is 50 to 75 hp (37 to 56 kW) and the standard engines used are the 50 hp (37 kW) Rotax 503 and the 64 hp (48 kW) Rotax 582 twin cylinder, two-stroke powerplants. [1] [2]

The SS-11 Skywatch has a typical empty weight of 420 lb (190 kg) and a gross weight of 950 lb (430 kg), giving a useful load of 530 lb (240 kg). With full fuel of 13 U.S. gallons (49 L; 11 imp gal) the payload for the pilot, passenger and baggage is 452 lb (205 kg). [1]

The aircraft was manufactured using computer numeric-controlled matched centres. The manufacturer estimated that the supplied kit could be completed in about 250 hours of work. [1] [2]

Operational history

In January 2017 there were six SS-11s registered with Transport Canada, but none registered in the United States with the Federal Aviation Administration. [4] [5]

Specifications (SS-11 Skywatch)

Data from AeroCrafter [1]

General characteristics

Performance

Related Research Articles

Spectrum Beaver

The Spectrum Beaver is a family of single- and two-place, pusher configuration, high-wing ultralight aircraft that were first introduced by Spectrum Aircraft of Surrey, British Columbia, Canada, in 1983.

The Kolb Ultrastar is an American single seat, high wing, strut-braced, single engine, pusher configuration, conventional landing gear-equipped ultralight aircraft that was produced in kit form by Kolb Aircraft of Phoenixville, Pennsylvania and intended for amateur construction.

The Brock Avion is an American ultralight aircraft that was designed and produced by Ken Brock Manufacturing, a company usually noted for its gyroplanes. The Avion was supplied as a kit for amateur construction.

The Aircore Cadet is an American ultralight aircraft that was designed by Jim Scott and produced by Aircore Industries in the early 1980s. The aircraft was supplied as a kit for amateur construction.

The Ultra-Fab Sundowner, also called the Sundowner Convertible, is an American ultralight aircraft that was designed by Bob Leinen and produced by Ultra-Fab. The aircraft was supplied as a kit for amateur construction.

The Greenwood Witch is an American ultralight aircraft that was designed and produced by Marvin Greenwood. The aircraft was supplied as a kit for amateur construction.

The J & J Ultralights Seawing is an American amphibious ultralight trike that was designed and produced by J & J Ultralights of Live Oak, Florida. The aircraft was supplied as a kit for amateur construction or as a complete aircraft.

The TC's Trikes Coyote is an American ultralight trike that was designed by TC Blyth and produced by TC's Trikes of Soddy-Daisy, Tennessee. Originally known as the TC Trike, with the introduction of strut-braced Mustang wing the model became known as the Coyote.

The Custom Flight Lite Star, or Light Star, is a Canadian amateur-built and light-sport aircraft, designed and produced by Custom Flight of Tiny, Ontario. The aircraft is supplied as a kit for amateur construction or complete ready-to-fly.

Just Superstol American homebuilt aircraft

The Just SuperSTOL is an American STOL amateur-built aircraft, designed and produced by Just Aircraft of Walhalla, South Carolina. The aircraft is supplied as a kit for amateur construction.

The North American Rotorwerks Pitbull Ultralight is an American autogyro, designed and produced by North American Rotorwerks of Tukwila, Washington. When it was available the aircraft was supplied as a kit for amateur construction, but by 2013 production had been suspended.

The AeroLites AeroMaster AG is an American homebuilt agricultural aircraft, designed and produced by AeroLites of Welsh, Louisiana. The aircraft is supplied as a kit for amateur construction.

The ARV Griffin is a Canadian homebuilt aircraft that was designed by Dave Marsden of the University of Alberta and produced by Canada Air RV and later by AC Millennium Corp, both of Edmonton. When it was available the aircraft was supplied as a kit for amateur construction.

Early Bird Jenny American homebuilt aircraft

The Early Bird Jenny is an American homebuilt aircraft that was designed by Dennis Wiley and produced by the Early Bird Aircraft Company of Erie, Colorado, also by Leading Edge Airfoils of Peyton, Colorado. When it was available the aircraft was supplied as a kit and also in the form of plans for amateur construction.

The Laron Wizard is an American homebuilt aircraft produced by Laron Aviation Tech of Borger, Texas. When it was available the aircraft was supplied as a kit for amateur construction.

The Las Brisas Mohawk is an American homebuilt aircraft that was designed and produced by Las Brisas Sales of Ozark, Missouri. When it was available the aircraft was supplied in the form of plans for amateur construction.

Letov ST-4 Aztek

The Letov ST-4 Aztek is a Czech microlight aircraft that was designed and produced by Letov Kbely of Prague - Letňany, in the 1990s. When it was available, the aircraft was supplied as a complete ready-to-fly aircraft, or as a kit for amateur construction.

The Microleve ML 450 is a Brazilian microlight aircraft that was designed and produced by Microleve of Rio de Janeiro. When it was available the aircraft was supplied as a complete ready-to-fly-aircraft or as a kit for amateur construction.

Rans S-20 Raven

The Rans S-20 Raven is an American homebuilt aircraft that was designed by Randy Schlitter and is produced by Rans Designs of Hays, Kansas, introduced at AirVenture in August 2013. The aircraft is supplied as a kit for amateur construction and it is anticipated that it will later be offered as a complete ready-to-fly-aircraft in the light-sport aircraft category.

The Star-Lite Warp 1-A is an American homebuilt aircraft that was designed and produced by Star-Lite Engineering of Englewood, Ohio, introduced in 1996. When it was available the aircraft was supplied as a kit for amateur construction.

References

  1. 1 2 3 4 5 6 7 8 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 166. BAI Communications, 15 July 1998. ISBN   0-9636409-4-1
  2. 1 2 3 4 5 6 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page B-103. Cybair Limited Publishing, 2001. ISBN   0-9680628-1-4
  3. Transport Canada (1 November 2013). "Listing of Models Eligible to be Registered as Advanced Ultra-Light Aeroplanes (AULA)" . Retrieved 26 December 2013.
  4. Transport Canada (5 January 2017). "Canadian Civil Aircraft Register" . Retrieved 5 January 2017.
  5. Federal Aviation Administration (5 January 2017). "Make / Model Inquiry Results" . Retrieved 5 January 2017.