GWR 6000 Class 6024 King Edward I

Last updated

King Edward I
Hugh llewelyn 6024 (5363454683).jpg
6024 King Edward I approaching Yatton on the Bristol Temple Meads - Paignton "Torbay Express"
Type and origin
Power typeSteam
Builder Great Western Railway, Swindon Works
Build dateJune 1930
Specifications
Configuration:
   Whyte 4-6-0
   UIC 2′C h4
Gauge 4 ft 8+12 in (1,435 mm) standard gauge
Leading dia. 3 ft 0 in (0.914 m)
Driver dia.6 ft 6 in (1.981 m)
Minimum curve 8 chains (530 ft; 160 m) normal,
7 chains (460 ft; 140 m) slow
Length68 ft 2 in (20.78 m) over buffers
Width8 ft 11+12 in (2.731 m)
Height13 ft 4+34 in (4.083 m)
Axle load 22 long tons 10 cwt (50,400 lb or 22.9 t)
(25.2 short tons) full
Adhesive weight 67 long tons 10 cwt (151,200 lb or 68.6 t)
(75.6 short tons) full
Loco weight89 long tons 0 cwt (199,400 lb or 90.4 t)
(99.7 short tons) full
Tender weight46 long tons 14 cwt (104,600 lb or 47.4 t)
(51.2 short tons) full
Total weight135  long tons  14 cwt (304,000 lb or 137.9 t)
(152.0 short tons)
Fuel type Coal
Fuel capacity6 long tons 0 cwt (13,400 lb or 6.1 t)
(6.7 short tons)
Water cap.4,000 imp gal (18,000 L; 4,800 US gal)
BoilerGWR Standard No. 12 [1]
Boiler pressure250 lbf/in2 (1.72 MPa)
Cylinders Four: two inside, two outside
Cylinder size 16+14 in × 28 in (413 mm × 711 mm)
Valve gear Inside cylinders: Walschaerts
Outside cylinders: derived from inside cylinders via rocking bars
Performance figures
Tractive effort 40,300 lbf (179.3 kN) original,
39,700 lbf (176.6 kN) after 1st overhaul
Career
Operators Great Western Railway
British Railways
Class King
Number in class30
Numbers6024
Official nameKing Edward I
Locale Western Region
RetiredJune 1962
Current owner Royal Scot Locomotive and General Trust
DispositionUndergoing overhaul to mainline standards
Official Website - King Edward I on Icons of Steam

6024 King Edward I is a preserved Great Western Railway (GWR) 6000 Class steam locomotive operated from 1930 to 1962 by the Great Western Railway and latterly British Railways hauling express passenger services.

Contents

After withdrawal, it was sent to Woodham Brothers scrapyard in Barry, South Wales, where it remained for a number of years before being bought for preservation. It returned to steam in 1989 and has since been certified for mainline running. The locomotive is currently undergoing a 10 yearly major overhaul to mainline running condition.

GWR/BR Operation

King Edward I at Didcot Railway Centre King Edward I 6024 Didcot (1).jpg
King Edward I at Didcot Railway Centre

Built at by the Great Western Railway's (GWR) Swindon Works in June 1930, for most of its working life it was allocated to Plymouth Laira. Transferred to Old Oak Common, London, in March 1959, and finally to Cardiff Canton TMD in 1962.

Sent to Swindon Works for breaking up, it had one final unusual task coupled to its twin, 6023 King Edward II, it was towed over a bridge for weight testing purposes. Resultantly, with them now being closer to South Wales than Swindon, both locomotives survived and ended up being sold to Woodham Brothers scrapyard in Barry, South Wales, where they languished in the company of 300 other locomotives.

Restoration

Inspired by preserved class-mate 6000 King George V's 1971 breach of British Rail's steam ban, in 1973 the King Preservation Society wanted to restore a locomotive to mainline condition. Both 6023 and 6024 were available for purchase, but 6024 was preferred because after a derailment in the Barry yard 6023 had had its rear driving wheels torched through, and at the time was considered beyond repair.

No 6024 was bought for £4,000 in 1974 but, like many of the other remaining locomotives, was missing significant components, including its double-chimney (currently fitted to No 6000) and its piston, connecting and eccentric rods; in addition its slide-bars had been cut through.

King Edward I at Didcot in 2011. King Edward I 6024 Didcot (4).jpg
King Edward I at Didcot in 2011.

The 36th locomotive to be rescued from Barry, 6024 was moved to the Buckinghamshire Railway Centre at Quainton Road. [2] On 2 February 1989, and after the creation of the Club100 funding initiative, 6024 moved again under its own power. It was re-commissioned on 26 April 1989 by the Duke of Gloucester. In October of that year the engine was moved by low-loader from Quainton Road to the Birmingham Railway Museum, from where it completed its mainline test runs. On 15 April 1990 it resumed its mainline career hauling revenue-earning passenger trains. [3]

In recognition of the high standard to which the locomotive had been restored, 6024 was outright winner of the 1990 British Coal sponsored Heritage Award (for a restoration project using coal), and awarded a £3,000 prize which was put towards the restoration of a British Railways Mark 1 BSK coach for conversion to a support coach to accommodate support crew and equipment for mainline work.

Mainline tours

King Edward I is overtaken by a High Speed Train while taking water at Taunton while working a Torbay Express service. Taunton 43140 6024.jpg
King Edward I is overtaken by a High Speed Train while taking water at Taunton while working a Torbay Express service.

The society was invited by British Rail to provide 6024 to haul the InterCity VIP special on 19 May 1990. In July 1990 it appeared at the National Railway Museum Exhibition on Tour which was held at Swindon Works, where it celebrated its 60th anniversary and was stabled alongside classmate 6000 King George V.

Affectionately nicknamed "Spud One"[ according to whom? ] the locomotive was used for an expanding mainline tour programme, based at either Tyseley, Didcot or Hereford Railway Centre. In late 1991 the locomotive was invited to haul the "William Shakespeare Express" from London Paddington, its first appearance there for almost thirty years.

As open access to the national network brought more routes into play in early 1992, 6024 was increasingly seen hauling passenger charter trains on a number of previously banned routes, including the mainlines to the West of England via Bristol, and South Wales through the Severn Tunnel. Fitted with BR's standard Automatic Warning System (permitting speeds up to 75 mph), 6024 reintroduced steam-hauled express passenger trains to a number of new destinations within western zones for the first time for many years.

In August 1992 the locomotive made its promised return to Quainton Road, this time via the mainline, when in the company of 5029 Nunney Castle it hauled shuttles to and from Aylesbury. However, plans to take a train to Plymouth were thwarted by the locomotive's cab height preventing it from passing an over-bridge at Plympton.

Modifications

After running almost 10,000 mainline miles, in March 1995 the locomotive was withdrawn from traffic for its heavy overhaul at the end of its mainline boiler certificate, and it retired to a secure Ministry of Defence site at Kineton in Warwickshire for the Society to carry out the work. In September 1996 it reappeared with a number of small but significant modifications, incorporated in order to make it more adaptable and to increase its availability.

The modifications included the fitting of dual-braking equipment (air and vacuum) to increase flexibility in the use of passenger rolling stock, and the reduction of its chimney, safety valves and cab-roof heights to permit it to fit within the standard loading gauge. This allowed it to make its return to Plymouth, first double-headed in November 1996, and then in April 1997 running solo. This was the first time an unassisted steam locomotive had been entrusted with a passenger train over the route since the early 1960s. In August 2002 6024 broke the record for steam haulage with the fastest modern-day time for the 52 miles from Plymouth to Exeter, in 58 minutes 6 seconds.

With a further 15,000 mainline miles on the clock, in October 2002 the locomotive was again withdrawn for its second major overhaul, which was being carried out by the Society within the site of Tyseley Locomotive Works. To keep pace with safety improvements, the locomotive was fitted with standard Train Protection & Warning System, and the society also completed its Water Wagon project for mainline trials. This will enable mainline water-stops to be avoided on certain routes. It returned to the mainline on 7 October 2004, on its third 7-year main line certificate.

Royal train

Hauling the Royal Train on the Severn Valley Railway 6024 King Edward I Royal Train Highley.jpg
Hauling the Royal Train on the Severn Valley Railway

On 10 June 2008, 6024 hauled the Royal Train, with Charles, Prince of Wales and Camilla, Duchess of Cornwall on board, from Kidderminster Town to Bridgnorth on the Severn Valley Railway. Between Bewdley and Arley, the Prince of Wales drove the locomotive.

Before leaving the SVR to resume its mainline appointments a broken tender axlebox was discovered that delayed its departure. Once repaired, a further delay was incurred by a defect in the air pump.

Royal Scot Locomotive & General Trust

Following an internal dispute within the 6024 Society which had owned the locomotive since its preservation, an unsuccessful legal case was pursued in 2010 by the owning Trusts board against the former Chief Mechanical Engineer, which resulted in a loss in the High Court. The resulting requirement to pay compensation and both parties' legal costs totalling over £500,000, resulted in the society becoming deficient in liquid cash funds.

Following discussions with various interested parties in December 2010, the society agreed to sell the locomotive to the Royal Scot Locomotive and General Trust, chaired by investor and steam enthusiast Jeremy Hosking. Following a meeting in December 2023, The 6024 Society closed voluntarily. [4]

From April 2012 the locomotive is currently undergoing a 10 yearly heavy general overhaul at the West Somerset Railway's workshops at Minehead, Somerset. 6024 undertook a steam test in late 2022 and left the West Somerset Railway by road for Crewe in February 2023 for the completion of its overhaul. As of February 2024, 6024 is still undergoing overhaul in Crewe. [4]

Related Research Articles

<span class="mw-page-title-main">GWR 4073 Class</span> Class of 171 four-cylinder 4-6-0 locomotives

The 4073 or Castle Class are 4-6-0 steam locomotives of the Great Western Railway, built between 1923 and 1950. They were designed by the railway's Chief Mechanical Engineer, Charles Collett, for working the company's express passenger trains. They could reach speeds of up to 100 mph (160 km/h).

<span class="mw-page-title-main">GWR 4900 Class</span> Class of 259 two-cylinder 4-6-0 locomotives

The Great Western Railway 4900 Class or Hall Class is a class of 4-6-0 mixed-traffic steam locomotives designed by Charles Collett for the Great Western Railway. A total of 259 were built at Swindon Works, numbered 4900–4999, 5900–5999 and 6900–6958. The LMS Stanier Class 5 4-6-0 and LNER Thompson Class B1 both drew heavily on design features of the Hall Class. After nationalisation in 1948, British Railways gave them the power classification 5MT.

GWR 4900 Class 5972 <i>Olton Hall</i> Preserved British steam locomotive

5972 Olton Hall is a preserved Great Western Railway Hall class locomotive made famous for its role hauling the Hogwarts Express in the Harry Potter film series.

<span class="mw-page-title-main">GWR 7800 Class</span>

The Great Western Railway (GWR) 7800 Class or Manor Class is a class of 4-6-0 steam locomotive. They were designed as a lighter version of the Grange Class, giving them a wider Route Availability. Like the 'Granges', the 'Manors' used parts from the GWR 4300 Class Moguls but just on the first batch of twenty. Twenty were built between 1938 and 1939, with British Railways adding a further 10 in 1950. They were named after Manors in the area covered by the Great Western Railway. Nine are preserved.

<span class="mw-page-title-main">GWR 6000 Class</span> Class of 4-6-0 steam locomotive

The Great Western Railway (GWR) 6000 Class or King Class is a class of 4-6-0 steam locomotives designed for express passenger work and introduced in 1927. They were the largest locomotives built by the GWR, apart from the unique Pacific. The class was named after kings of the United Kingdom and of England, beginning with the then reigning monarch, King George V, and going back through history. They handled the principal GWR expresses on the main line from London to the West of England and on the Chiltern line to Birmingham and Wolverhampton, until 1962 when the class was withdrawn.

GWR 6000 Class 6023 <i>King Edward II</i> Preserved British steam locomotive

Great Western Railway (GWR) 6000 Class 6023 King Edward II is a preserved steam locomotive.

GWR 4900 Class 4936 <i>Kinlet Hall</i> Preserved British 4-6-0 locomotive

The Great Western Railway (GWR) steam locomotive No. 4936 Kinlet Hall is a preserved 4-6-0 Hall class locomotive

GWR 4900 Class 5952 <i>Cogan Hall</i>

GWR Hall Class 5952 Cogan Hall was built at Swindon in December 1935. As a mixed traffic engine it handled both passenger duties and freight duties. Its first shed allocation was the Penzance depot in Cornwall. In August 1950 it moved to Old Oak Common. During this time it was fitted with a three row superheater. In March 1959 it moved again to the Worcester depot. Its last shed allocation was to Cardiff East Dock before it was withdrawn from duties in June 1964.

GWR 4073 Class 5029 <i>Nunney Castle</i>

GWR 4073 Class 5029 Nunney Castle is a Great Western Railway Castle Class steam locomotive. It was built at the GWR's Swindon Works in 1934, being outshopped on 28 May and taking the name of Nunney Castle near Frome, Somerset. The locomotive was used in many publicity and "life on the railway" type of photographs. During the first day of the evacuation of civilians during World War II, the locomotive hauled trains carrying children being taken from London to the safety of the countryside. Nunney Castle was also used to haul the Royal Train in October 1957 from London Paddington station to Gloucester.

GWR 7800 Class 7822 <i>Foxcote Manor</i> Preserved British 4-6-0 locomotive

The Great Western Railway steam locomotive no. 7822 Foxcote Manor is a 4-6-0 Manor Class locomotive, built in 1950 at Swindon Works. It is part of a post-war batch of 10 locomotives, which follows on from 20 earlier locomotives built in 1938.

GWR 4073 Class 5043 <i>Earl of Mount Edgcumbe</i>

The GWR 4073 Class 5043 Earl of Mount Edgcumbe is a steam locomotive of the GWR 'Castle' Class, built in March 1936. It was originally named Barbury Castle, and was renamed Earl of Mount Edgcumbe in September 1937. It had a double chimney and 4 row superheater fitted in October 1958.

GWR 4073 Class 5080 <i>Defiant</i> Preserved British 4-6-0 locomotive

GWR 4073 Class 5080 Defiant is a GWR 4073 Class steam locomotive built for the Great Western Railway at Swindon Works in May 1939. It was originally named Ogmore Castle.

GWR 4900 Class 4953 <i>Pitchford Hall</i>

4953 Pitchford Hall is a 4-6-0 Hall class steam locomotive built by the Great Western Railway (GWR), currently preserved at the Epping Ongar Railway.

GWR 4073 Class 7029 <i>Clun Castle</i>

GWR 4073 Class No. 7029 Clun Castle is a 4-6-0 steam locomotive built at Swindon Works in May 1950 to a design by Charles Collett for operation on the Western Region of British Railways. It was named after Clun Castle in Shropshire.

GWR 7800 Class 7812 <i>Erlestoke Manor</i>

7812 Erlestoke Manor is a preserved GWR 7800 Class steam locomotive, operated by the Great Western Railway and later British Railways. Owned by the Erlestoke Manor Fund, as at December 2022 it was in operational condition on the Severn Valley Railway.

GWR 4900 Class 4965 <i>Rood Ashton Hall</i>

The Great Western Railway steam locomotive no. 4965 Rood Ashton Hall is a 4-6-0 Hall class locomotive. It is preserved at Tyseley Locomotive Works. The engine operates in its Great Western Railway green livery, and performs regularly on the Shakespeare Express, operated by Vintage Trains, between Birmingham and Stratford-upon-Avon, as well as various excursions.

GWR 4900 Class 4930 <i>Hagley Hall</i>

4930 Hagley Hall is a Great Western Railway, 4-6-0 Hall class locomotive, built in May 1929 at Swindon Works to a design by Charles Collett. It is one of eleven of this class that made it into preservation. The locomotive is named after Hagley Hall in Worcestershire.

GWR 7800 Class 7802 <i>Bradley Manor</i>

7802 Bradley Manor is a 7800 'Manor' Class 4-6-0 steam locomotive. Built by the Great Western Railway at its Swindon Works in January 1938 it had an operating life of 27 years being withdrawn in November 1965. Designed by Charles Collett, it is one of nine of the class to be preserved and is currently based on the Severn Valley Railway.

GWR 7800 Class 7819 <i>Hinton Manor</i>

7819 Hinton Manor is a Great Western Railway locomotive part of the Manor Class. It is one of 9 locomotives preserved from the class which originally had 30.

References

  1. Champ, Jim (2018). An Introduction to Great Western Locomotive Development. Barnsley: Pen & Sword Transport. p. 321. ISBN   978-1-4738-7784-9. OCLC   1029234106. OL   26953051M.
  2. "Kings at Quainton". The Railway Magazine . No. 865. May 1973. p. 255.
  3. "King Edward I in steam at Tyseley". The Railway Magazine. No. 1064. December 1989. p. 768.
  4. 1 2 "6024 boiler to be lifted as 'King takes Castle'". Trackside. No. 32. March 2024. p. 25.