Members of the western concert flute family

Last updated

The western concert flute family has a wide range of instruments.

Contents

Piccolo

The Piccolo. Piccolo.jpg
The Piccolo.

The piccolo is the highest-pitched member of the flute family, with a range an octave above that of the concert flute. It is usually the highest-pitched instrument within orchestras and bands. The piccolo has a stereotype for being difficult to play in tune; its small size makes it difficult to construct an evenly tuned scale.

Treble flute

The Myall-Allen G Treble Flute. Gtreble full together copy1.jpg
The Myall-Allen G Treble Flute.

The treble flute is pitched in the key of G, a fifth above the concert flute. The instrument is rare today, only occasionally found in flute choirs or private collections.

Soprano flute

This distinctive sounding instrument is rarely found at present. A few American publications for flute choir currently include a part for an E (soprano) flute, an instrument pitched a minor third higher than the standard C flute. In these publications, an alternative part is provided either for the C flute or for the piccolo.

Concert flute

Concert flute in use. Flute player.jpg
Concert flute in use.

The standard concert flute is by far the most common member of the flute family. The flute is used in many ensembles including concert bands, orchestras, flute ensembles, occasionally jazz bands and big bands.

The instrument is pitched in C and has a range of just over three octaves starting from the musical note C4 (corresponding to middle C on the piano), however, some experienced flautists are able to reach C8. Many professional flutes have a longer B-foot joint, which can reach B3.

Flûte d'amour

The flûte d'amour or flauto d'amore is pitched in A, A, or B and is intermediate in size between the modern C concert flute and the alto flute in G. It is the mezzo-soprano, tenor or countertenor member of the flute family. It is sometimes referred to as a tenor flute. The range of the instrument is from G3 to E7. The B version is usually used for jazz because both the tenor saxophone and clarinet are in B.

Alto flute

The alto flute. Alto flute 006.jpg
The alto flute.

The alto flute is characterized by its distinct, mellow tone in the lower portion of its range. The tube of the alto flute is considerably thicker and longer than a C flute and requires more breath from the player. However, this gives it a greater dynamic presence in the bottom octave and a half of its range. It is pitched in the key of G (sounding a fourth lower than written) with its range stretching from G3 to G6. The headjoint may be straight or curved.

Bass flute

The bass flute is pitched in the key of C, and one octave below the concert flute. Because of the length of its tube (approximately 146 cm or 57 in), it is usually made with a curved headjoint, sometimes in a "J" shape, to bring the embouchure hole within reach of the player. It is usually only used in flute choirs, as it is easily drowned out by other instruments of comparable register, such as the clarinet.

Contra-alto flute

The contra-alto flute (also called contrabass flute in G) is in the key of G, pitched one octave below the alto flute, and a fourth below the bass flute. It is so large that the instrument's body is held vertically, with an adjustable floor peg similar to that of the bass clarinet.

Contrabass flute

The contrabass flute. Kotatocontra flute.jpg
The contrabass flute.

The contrabass flute (sometimes also called octobass flute) is used mostly in flute ensembles. Its range is similar to that of the regular concert flute, except that it is pitched two octaves lower; the lowest performable note is C2 (equivalent to the lowest C on the cello). Many contrabass flutes in C are also equipped with a low B1 (in the same manner as many modern standard sized flutes are). The contra-alto flute is sometimes referred to as a contrabass flute in G.

Subcontrabass flute

The subcontrabass flute. Evakingmasubcontra jpg.jpg
The subcontrabass flute.

An instrument in the key of G, pitched a fourth below the contrabass flute in C and two octaves below the alto flute in G; it is sometimes also called a double contra-alto flute.

Double contrabass flute

The double contrabass flute. Maria doublecontra.jpg
The double contrabass flute.

The double contrabass flute (sometimes also called octobass flute) is pitched in the key of C, three octaves below the concert flute (two octaves below the bass flute, and one octave below the contrabass flute). Its lowest note is C1, one octave below the cello's lowest C. Despite the tendency of the larger sizes of flute to be quiet, the double contrabass flute has a surprisingly powerful tone, though it benefits from amplification in ensembles.

Hyperbass flute

Roberto Fabbriciani with hyperbass flute. Roberto Fabbriciani with hyperbass flute.jpg
Roberto Fabbriciani with hyperbass flute.

The hyperbass flute is the largest and lowest instrument in the flute family. It is pitched in C, four octaves below the concert flute (and three octaves below the bass flute, two octaves below the contrabass flute, and one octave below the double contrabass flute). It is made of PVC and wood, its tubing is over 8 metres (26 ft) in length and its lowest note is C0 (16 Hz), below what is generally considered the range of human hearing. The only known example of the instrument is a prototype built for Italian flautist Roberto Fabbriciani by Francesco Romei, a Florentine craftsman.

Related Research Articles

Clarinet type of woodwind instrument

The clarinet is a family of woodwind instruments. It has a single-reed mouthpiece, a straight, cylindrical tube with an almost cylindrical bore, and a flared bell. A person who plays a clarinet is called a clarinetist.

Clef Musical symbol used to indicate the pitch of written notes

A clef is a musical symbol used to indicate the pitch of written notes. Placed on a stave, it indicates the name and pitch of the notes on one of the lines. This line serves as a reference point by which the names of the notes on any other line or space of the stave may be determined.

Transposing instrument Musical instrument for which notated pitch differs from sounding pitch

A transposing instrument is a musical instrument whose music is recorded in staff notation at a pitch different from the pitch that actually sounds. A written middle C (C4) on a transposing instrument produces a pitch other than C, and that pitch identifies the interval of transposition when describing the instrument. For example, a written C on a B clarinet or a trumpet sounds a concert B.

Contrabass refers to several musical instruments of very low pitch—generally one octave below bass register instruments. While the term most commonly refers to the double bass, many other instruments in the contrabass register exist.

Contrabass clarinet contrabass member of the clarinet family

The contrabass clarinet and contra-alto clarinet are the two largest members of the clarinet family that are in common usage. Modern contrabass clarinets are pitched in B, sounding two octaves lower than the common B soprano clarinet and one octave lower than the B bass clarinet. Some contrabass clarinet models have a range extending down to low (written) E, while others can play down to low D or further to low C. This range, C(3) – E(6), sounds B(0) – D(4). Some early instruments were pitched in C; Arnold Schoenberg's Fünf Orchesterstücke specifies a contrabass clarinet in A, but there is no evidence of such an instrument ever having existed.

Tenor saxophone type of saxophone

The tenor saxophone is a medium-sized member of the saxophone family, a group of instruments invented by Adolphe Sax in the 1840s. The tenor and the alto are the two most commonly used saxophones. The tenor is pitched in the key of B (while the alto is pitched in the key of E), and written as a transposing instrument in the treble clef, sounding an octave and a major second lower than the written pitch. Modern tenor saxophones which have a high F key have a range from A2 to E5 (concert) and are therefore pitched one octave below the soprano saxophone. People who play the tenor saxophone are known as "tenor saxophonists", "tenor sax players", or "saxophonists".

Alto flute a flute in G, a fourth below the concert flute

The alto flute is an instrument in the Western concert flute family, the second-highest member below the standard C flute after the uncommon flûte d'amour. It is the third most common member of its family after the standard C flute and the piccolo. It is characterized by its rich, mellow tone in the lower portion of its range. It is a transposing instrument in G, and uses the same fingerings as the C flute.

The bass flute is a member of the flute family. It is in the key of C, pitched one octave below the concert flute. Despite its name, its playing range makes it the tenor member of the flute family. Because of the length of its tube, it is usually made with a J-shaped head joint, which brings the embouchure hole within reach of the player. It is usually only used in flute choirs, as it is easily drowned out by other instruments of comparable register, such as the clarinet.

Western concert flute Transverse woodwind instrument made of metal or wood

The Western concert flute is a family of transverse (side-blown) woodwind instruments made of metal or wood. It is the most common variant of the flute. A musician who plays the flute is called a flautist, flutist, flute player, or (rarely) fluter.

The alto clarinet is a woodwind instrument of the clarinet family. It is a transposing instrument pitched in the key of E, though instruments in F have been made. In Europe it is sometimes called a tenor clarinet. In size it lies between the soprano clarinet and the bass clarinet. It bears a greater resemblance to the bass clarinet in that it typically has a straight body, but a curved neck and bell made of metal. All-metal alto clarinets also exist. In appearance it strongly resembles the basset horn, but usually differs in three respects: it is pitched a semitone higher, it lacks an extended lower range, and it has a wider bore than many basset horns.

Contrabass flute flute pitched two octaves lower than the concert flute

The contrabass flute is one of the rarer members of the flute family. It is seen often in flute ensembles, however it is recently being used in solo and chamber music situations. Its range is similar to that of the regular concert flute, except that it is pitched two octaves lower; the lowest performable note is two octaves below middle C. Many contrabass flutes in C are also equipped with a low B, Contrabass flutes are only available from select flute makers.

Subcontrabass flute A flute in G, pitched two octaves below the alto flute and two and a half octaves below the concert flute

The subcontrabass flute is one of the largest instruments in the flute family, measuring over 15 feet (4.6 m) long. The instrument can be made in the key of G, pitched a fourth below the contrabass flute in C and two octaves below the alto flute in G; which is sometimes also called double contra-alto flute, or in C, which will sound three octaves lower than the C flute.

Marching brass

Marching brass instruments are brass instruments specially designed to be played while moving. Most instruments do not have a marching version - only the following have marching versions:

Double contrabass flute Wind instrument of the flute family

The double contrabass flute (sometimes also called the octobass flute or subcontrabass flute) with over 5.5 metres (18 ft) of tubing is the largest and lowest pitched metal flute in the world (the hyperbass flute has an even lower range, though it is made out of PVC pipes and wood). It is pitched in the key of C, three octaves below the concert flute (two octaves below the bass flute and one octave below the contrabass flute). Its lowest note is C1, one octave below the cello's lowest C. This flute is relatively easy to play in comparison to most other large flutes. Despite the tendency of the larger sizes of flute to be softer than their higher pitched relatives, the double contrabass flute has a relatively powerful tone, although it usually benefits from amplification in ensembles.

Contra-alto flute

The Contra-alto flute or bass flute in the key of G, is a musical instrument of the woodwind family that plays sounds one octave lower than the alto flute. It is a transposing instrument. The instrument's body is held either vertically or horizontally, with an adjustable floor peg similar to that of the bass clarinet. The contra-alto flute is primarily used to fill in harmonic and melodic voices between the bass and contrabass flute. It is the baritone member of the flute family.

Clarinet family

The clarinet family is a musical instrument family including the well-known B clarinet, the bass clarinet, the slightly less familiar E and A clarinets and other clarinets.

A flute choir is an instrumental chamber ensemble consisting of range extensions of the flute family. Although a flute quartet can, in some cases depending on instrumentation, be considered a flute choir, most flute choirs extend the melodic range of the group in either direction with the addition of "melody" flutes. Most flute ensembles of five or more people can be considered a flute choir, although this is not a fixed number.

The treble flute is a member of the flute family. It is in the key of G, pitched a fifth above the concert flute and is a transposing instrument, sounding a fifth up from the written note. The instrument is rare today, only occasionally found in flute choirs, some marching bands or private collections. Some 19th-century operas, such as Ivanhoe include the instrument in their orchestrations.

There are many different types of trombone. The most frequently encountered trombones today are the tenor and bass, though as with other Renaissance instruments such as the recorder, the trombone has been built in every size from piccolo to contrabass.

The woodwind section, which consists of woodwind instruments, is one of the main sections of an orchestra or concert band. Woodwind sections contain instruments given Hornbostel-Sachs classifications of 421 and 422, but exclude 423