Mijn Genoegen, Arnhem

Last updated
Mijn Genoegen
Openluchtmuseum Arnhem MijnGenoegen 03.jpg
Mijn Genoegen, 2008
Mijn Genoegen, Arnhem
Origin
Mill nameMijn Genoegen
Mill locationNetherlands Open Air Museum,
Schelmseweg 89 6816 SJ Arnhem
Coordinates 52°00′42″N5°54′31″E / 52.011610°N 5.908718°E / 52.011610; 5.908718 Coordinates: 52°00′42″N5°54′31″E / 52.011610°N 5.908718°E / 52.011610; 5.908718
Operator(s)Netherlands Open Air Museum
Year built1928
Information
Purpose Sawmill
Type Paltrok mill
No. of sailsFour sails
Type of sails Common sails
WindshaftCast iron
WindingTailpole and winch
Auxiliary powerElectric motor
Other informationThree vertical frame saws

Mijn Genoegen (English: My Pleasure) is a paltrok mill in the Netherlands Open Air Museum in Arnhem, Gelderland, Netherlands which has been restored to working order. As are all Dutch paltrok mills, it is a wind-powered sawmill.

Contents

History

The windmill was built around 1680 in Dordrecht, where it was known as Het Spinnewiel (English: The spinning-wheel). In 1854 the mill was moved to Numansdorp and the name was changed to Mijn Genoegen (English: My pleasure). Two of the three wooden sawing frames were replaced by cast iron frames in 1854; the wooden windshaft was replaced with cast iron in 1887. [1] In Numansdorp the mill was continuously owned by the Verboom family [2] until the museum bought the mill in good condition from the owner.

It was re-erected in Arnhem in 1928. The mill was damaged in World War II during Operation Market Garden. Prior to repairs in 1946, it was moved to a different site on the museum grounds, where it served as a static display. In the late 1980s, it received a major restoration to working order. [3]

Description

Mijn Genoegen is a Dutch paltrok mill - a wooden mill supported on a short central post and a ring of wooden rollers on a low brick base, designed specifically for sawing wood. The mill body is boarded; however, the sawing floor is open on three sides with only the windward facing side and the side roofs giving protection against the weather. The entire mill is winded by a tailpole and winch. On the front is a stage, 2.90 metres (9 ft 6 in) above ground for setting the sails. The sails are common sails with a span of 17.50 metres (57 ft 5 in). They are carried on a cast-iron windshaft cast by Penn & Bauduin of Dordrecht. The function of the brake wheel is split between two wheels, one wheel with a flat outer rim for the brake blocks to work on and another wheel with 55 radial cogs driving the lantern wheel with 25 iron staves on the horizontal crank shaft. There is no upright shaft. Connecting rods from the three crank pins drive the sawing frames. Reciprocating lever bars also drive the pawl and ratchet mechanisms which in turn drive the winches and the feeding mechanism of the log carriages through rack and pinion mechanisms. The winches can be used with the log hoist to lift logs from the water onto the sawing platform and to pull the log carriages back to their starting position. [1]

The mill cannot catch enough wind in its sheltered location to enable wind-powered sawing. To demonstrate the sawing process to the public, the crankshaft is powered by an electric motor. The cogs of the brake wheel have been removed so the sails can be turned by the wind independently of the electric-powered saws. [3]

Public access

The mill can be visited during opening hours of the museum. The miller is mostly on site on Wednesdays. [3]

See also

Windmills in Arnhem

Windmills in the Netherlands Open Air Museum

Related Research Articles

Grenszicht, Emmer-Compascuum

Grenszicht or Molen van Geerdink is a smock mill in Emmer-Compascuum, Netherlands. It was built in 1907. The mill is listed as a Rijksmonument, number 14690.

Grutte Mûne, Broeksterwâld Windmill in Friesland

The Grutte Mûne is a smock mill in Broeksterwâld, Friesland, Netherlands which has been restored to working order. The mill is listed as a Rijksmonument, number 11679.

De Hoop, Norg Dutch windmill

De Hoop is a smock mill in Norg, Drenthe, the Netherlands. It was built in 1906 and is listed as a Rijksmonument, number 30781.

De Zwaluw, Oudemolen Dutch windmill

De Zwaluw is a smock mill in Oudemolen, Drenthe, the Netherlands. It was built in 1837 and is listed as a Rijksmonument, number 38148.

De Gekroonde Poelenburg

De Gekroonde Poelenburg is a paltrok mill in Zaandam, North Holland, Netherlands which has been restored to working order. As all Dutch paltrok mills it is a windpowered sawmill. The mill is listed as a Rijksmonument, number 40093. It is located at the Zaanse Schans in a group of several historic industrial windmills.

De Mearmin

De Mearmin, formerly also known as Geestermermeermolen is a smock mill in Damwâld, Friesland, Netherlands which was built in 1968 at Dokkum. The mill is listed as a Rijksmonument, number 467708. Between 2014 and 2016, the mill was dismantled, restored and moved to a new site in Damwâld.

Spinnenkop Openluchtmuseum, Arnhem Dutch windmill

The spinnenkop of the Netherlands Open Air Museum in Arnhem is a small drainage mill originally located near Gorredijk, Friesland, Netherlands. It is a hollow post windmill that has been restored to working order.

De Otter, Amsterdam

De Otter is a paltrok mill in Amsterdam, North Holland, Netherlands which has been restored to working order. As all Dutch paltrok mills it is a windpowered sawmill. The mill is listed as a Rijksmonument, number 1198.

De Eenhoorn, Haarlem

De Eenhoorn is a paltrok mill in Haarlem, North Holland, Netherlands which has been restored to working order. As all Dutch paltrok mills it is a windpowered sawmill. The mill is listed as a Rijksmonument, number 19872.

De Held Jozua, Zaandam

De Held Jozua is a paltrok mill in Zaandam, North Holland, Netherlands which has been restored to working order. As all Dutch paltrok mills it is a windpowered sawmill. The mill is listed as a Rijksmonument, number 40094.

Huizermolen, Arnhem Dutch windmill

Huizermolen is a post mill in the Netherlands Open Air Museum, Arnhem, Gelderland, Netherlands which was built in 1919 and is in working order.

Arnhem smock mill (1960) Dutch windmill

The smock mill at the Netherlands Open Air Museum, Arnhem, Gelderland, Netherlands was originally built at Noordlaren, Groningen, Netherlands in 1862. It was dismantled in 1953 and re-erected at the museum in 1960. The mill has been restored to working order.

De Hoop, Arnhem Dutch windmill

De Hoop is a tower mill in Arnhem, Gelderland, Netherlands which was built in 1846 and is in working order. The mill is listed as a Rijksmonument.

Het Fortuyn, Arnhem Dutch windmill

Het Fortuyn is a tower mill in the Netherlands Open Air Museum, Arnhem, Gelderland, Netherlands which was built in 1920 and is in working order.

De Kroon, Arnhem Dutch windmill

De Kroon or the Klarendalse Molen is a tower mill in Arnhem, Gelderland, Netherlands which was built in 1870 and is in working order. The mill is listed as a Rijksmonument.

Arnhem post mill (1946) Dutch windmill

A hollow post mill at the Netherlands Open Air Museum, Arnhem, Gelderland, Netherlands was originally built at Gouda, South Holland, Netherlands. It was dismantled in 1946 and re-erected at the museum. The mill has been restored to working order.

Arnhem post mill (1989) Dutch windmill

A hollow post mill at the Netherlands Open Air Museum, Arnhem, Gelderland, Netherlands was originally built at Wormer, North Holland, Netherlands. During World War I, it was moved to Langweer, Friesland. It was dismantled in 1960 and re-erected at the museum in 1989. The mill has been restored to working order.

De Kempermolen, Breedenbroek Dutch windmill

De Kempermolen is a tower mill in Breedenbroek, Gelderland, Netherlands which was built in 1882 and has been restored to working order. The mill is listed as a Rijksmonument.

De Vlinder, Deil A tower mill in Deil, Netherlands, built in 1913

De Vlinder is a tower mill in Deil, Gelderland, Netherlands which was built in 1913 and has been restored to working order. The mill is listed as a Rijksmonument.

Aurora, Dichteren Dutch windmill

Aurora is a tower mill in Dichteren, Gelderland, Netherlands which was built in 1870 and has been restored to working order. The mill is listed as a Rijksmonument.

References

  1. 1 2 "Openluchtmuseum (Spinnenwiel/Mijn Genoegen) te Arnhem" (in Dutch). De Hollandsche Molen. Archived from the original on August 8, 2014. Retrieved October 28, 2012.
  2. "Mijn Genoegen/ Het Spinnenwiel, Numansdorp" (in Dutch). Database van Verdwenen Molens. Retrieved October 28, 2012.
  3. 1 2 3 "Arnhem, Gelderland" (in Dutch). Nederlandse Molendatabase. Retrieved October 28, 2012.