Proton Synchrotron Booster

Last updated
CERN Complex
CERN accelerator complex 2022.png
Current particle and nuclear facilities
LHC Accelerates protons and heavy ions
LEIR Accelerates ions
SPS Accelerates protons and ions
PSB Accelerates protons
PS Accelerates protons or ions
Linac 3 Injects heavy ions into LEIR
Linac4 Accelerates ions
AD Decelerates antiprotons
ELENA Decelerates antiprotons
ISOLDE Produces radioactive ion beams
MEDICIS Produces isotopes for medical purposes
Injection and transfer lines of the Proton Synchrotron Booster Injection and transfer lines of the Proton Synchrotron Booster.jpg
Injection and transfer lines of the Proton Synchrotron Booster
The surface above the PS Booster at CERN. The ring-shaped accelerator is visible as a circular building that rises from the ground. PS Booster surface.JPG
The surface above the PS Booster at CERN. The ring-shaped accelerator is visible as a circular building that rises from the ground.
The Proton Synchrotron Booster in its tunnel The Proton Synchrotron Booster in its tunnel.jpg
The Proton Synchrotron Booster in its tunnel
Artist's impression of the Proton Synchrotron Booster Artist's impression of the Proton Synchrotron Booster.png
Artist's impression of the Proton Synchrotron Booster

The Proton Synchrotron Booster (PSB) is the first and smallest circular proton accelerator (a synchrotron) in the accelerator chain at the CERN injection complex, which also provides beams to the Large Hadron Collider. [1] It contains four superimposed rings with a radius of 25 meters, which receive protons with an energy of 160  MeV from the linear accelerator Linac4 and accelerate them up to 2.0  GeV , ready to be injected into the Proton Synchrotron (PS). Before the PSB was built in 1972, Linac 1 injected directly into the Proton Synchrotron, but the increased injection energy provided by the booster allowed for more protons to be injected into the PS and a higher luminosity at the end of the accelerator chain.

Contents

The PSB does not only act as a proton injector for the PS but also provides protons at an energy of 1.4 GeV to On-Line Isotope Mass Separator (ISOLDE), the only experimental facility directly linked to the PSB.

Historical background

1964–1968: Planning and start of construction

Before the PSB became operational in 1972, the protons were directly delivered to the Proton Synchrotron (PS) by the linear accelerator Linac 1, providing the PS with protons of 50 MeV, which were then accelerated by the PS to 25 GeV at beam intensities of approximately 1012 protons per pulse. [2] However, with the development of new experiments (mainly at the Intersecting Storage Rings ISR), the demanded beam intensities in the order of 1013 protons per pulse exceeded the capabilities of this setup. Therefore, different approaches on how to increase the beam energy already before the protons enter the PS were discussed.

Different suggestions for this new PS injector were made, for example another linear accelerator or five intersecting synchrotron rings inspired by the shape of the Olympic rings. [3] Eventually, it was decided to go for a setup of four vertically stacked synchrotron rings with a radius of 25 meters, which was proposed in 1964. [4] With this special design, it would become possible to reach the aspired intensities of more than 1013 protons per pulse.

In 1967, the budget of the overall update program was estimated to be 69.5 million CHF (1968 prices). More than half of this sum was devoted to the construction of the PSB, which started one year later, in 1968. [4]

1972–1974: First beam and start-up

The first proton beams in the PSB were accelerated on May 1 in 1972, and the nominal energy of 800 MeV was reached on May 26. In October 1973, the intermediate intensity goal of 5.2 1012 protons per pulse delivered to the PS was reached. In total, it took around two years to achieve the design intensity of 1013 protons per pulse.

1973–1978: Update to Linac 2

During the first years of operation, it became clear that the linear accelerator Linac 1, CERN's primary proton source at that time, was unable to keep up with the technical advances of the other machines within the accelerator complex. Therefore, it was decided in 1963 to build a new linear accelerator, which would later be called Linac 2. This new machine would provide protons with the same energy as before (50 MeV), but with higher beam currents of up to 150 mA and a longer pulse duration of 200 μs. [5] Construction of Linac 2 started in December 1973 and was completed in 1978.

Linac 1 continued to operate as a source of light ions up to 1992.

1988: Upgrade to 1 GeV

After more than ten years of operation, the constant increase of the beam intensity also demanded an increase in output energy of the PSB. Therefore, with only minor hardware adjustments, the PSB was upgraded to 1 GeV in 1988. [6]

1980s–2003: Accelerating ions

From the beginning of the 1980s until 2003, the PSB was also used to accelerate light ions like oxygen or alpha-particles, which were delivered by Linac 1. After Linac 3 as a dedicated ion linear accelerator became operational, also heavy ions such as lead and indium were accelerated by the PSB.

From 2006 on, the Low Energy Ion Ring (LEIR) took over PSB's former task of accelerating ions. [7]

1992: Connection to ISOLDE experiment

Up to 1992, the only machine that used the output protons from the PSB was the PS. This changed in 1992, when the On-Line Isotope Mass Separator (ISOLDE) became the second recipient of PSB's protons. [8] Before, ISOLDE had obtained protons from the Synchro-Cyclotron, but this machine had reached the end of its lifetime by the end of the 1980s. Thus, it was decided in 1989 to connect ISOLDE to the PSB.

1999: Preparation for the LHC and upgrade to 1.4 GeV

With the Large Hadron Collider (LHC) at the horizon, another upgrade of the PSB to 1.4 GeV was necessary. This upgrade implied more severe adjustments of the hardware than the previous upgrade to 1 GeV, because the limits of PSB's design parameters had been reached. In 2000, the upgrade was completed.

2010–2026: Future upgrades for the High Luminosity Large Hadron Collider

In 2010, the cornerstone for another upgrade of the LHC was laid: the High Luminosity Large Hadron Collider. [9]

The much higher required beam intensity made it necessary to increase the PSB's output energy to 2.0 GeV. This was implemented during Long Shutdown 2 (2019–2020) by the exchange and update of various key equipment of the PSB, for example the main power supply, the radio-frequency system, the transfer line to the PS and the cooling system.

Additionally, the input energy of the PSB has been increased: Linac4, provides an output beam energy of 160 MeV, replacing Linac2. Linac4 enables the PSB to provide higher quality beam for the LHC by using hydrogen anions (H− ions) rather than bare protons (H+ ions). A stripping foil at the PSB injection point will strip the electrons off the hydrogen anions, thus creating protons that are accumulated as beam bunches in the four PSB rings. These proton bunches are then recombined at the exit of the PSB and further transferred down the CERN injector chain.

Setup and operation

The PSB is part of CERN's accelerator complex. By the time it was constructed, the Meyrin campus had just been enlarged, now covering French territory as well. The center of PSB's rings sits directly on the border between France and Switzerland. Due to the countries’ different regulations regarding buildings at the border, it was decided to build the main PSB construction underground. The only visible PSB infrastructure is located on the Swiss side. The PSB consists of four vertically stacked rings with a radius of 25 meters. Each ring is sectioned into 16 periods with two dipole magnets per period and a triplet focusing structure made up of three quadrupole magnets (focusing, defocusing, focusing). [10] Every magnet structure consists of four single magnets for the four rings stacked on top of each other, sharing one yoke.

Since the PSB consists of four rings in contrast to only one beamline in Linac 2 and one ring in the PS, a special construction is necessary to couple the proton beams in and out. The proton beam coming from Linac 2 is split up vertically into four different beams by the so-called proton distributor: The beam travels through a series of pulsed magnets, which successively deflect parts of the incoming beam to different angles. This results in four beamlets filling the four rings, as well as the rising and falling edge of the proton pulse, which get dumped after the proton distributor. [2]

Similarly, the four beamlets are merged again after they have gotten accelerated by the PSB. With a series of different magnetic structures, the beams from the four rings are brought to one vertical level and are then directed towards the PS.

In 2017, 1.51×1020 protons were accelerated by the PSB. 61.45% of those were delivered to ISOLDE, and only a small fraction of 0.084% were used by the LHC. [11]

Results and discoveries

The only direct experiment that is fed by PSB's protons is the On-Line Isotope Mass Separator (ISOLDE). There, the protons are used to create different types of low-energy radioactive nuclei. [12] With these, a wide variety of experiments ranging from nuclear and atomic physics to solid state physics and life sciences are conducted. In 2010, the MEDICIS facility was initiated as part of ISOLDE, which uses leftover protons from ISOLDE targets to produce radioisotopes suitable for medical purposes. [13]

Related Research Articles

<span class="mw-page-title-main">CERN</span> European research centre based in Geneva, Switzerland

The European Organization for Nuclear Research, known as CERN, is an intergovernmental organization that operates the largest particle physics laboratory in the world. Established in 1954, it is based in a northwestern suburb of Geneva, on the France–Switzerland border. It comprises 23 member states. Israel, admitted in 2013, is the only non-European full member. CERN is an official United Nations General Assembly observer.

<span class="mw-page-title-main">Tevatron</span> Defunct particle accelerator at Fermilab in Illinois, USA (1983–2011)

The Tevatron was a circular particle accelerator in the United States, at the Fermi National Accelerator Laboratory, east of Batavia, Illinois, and is the second highest energy particle collider ever built, after the Large Hadron Collider (LHC) of the European Organization for Nuclear Research (CERN) near Geneva, Switzerland. The Tevatron was a synchrotron that accelerated protons and antiprotons in a 6.28 km (3.90 mi) ring to energies of up to 1 TeV, hence its name. The Tevatron was completed in 1983 at a cost of $120 million and significant upgrade investments were made during its active years of 1983–2011.

<span class="mw-page-title-main">Linear particle accelerator</span> Type of particle accelerator

A linear particle accelerator is a type of particle accelerator that accelerates charged subatomic particles or ions to a high speed by subjecting them to a series of oscillating electric potentials along a linear beamline. The principles for such machines were proposed by Gustav Ising in 1924, while the first machine that worked was constructed by Rolf Widerøe in 1928 at the RWTH Aachen University. Linacs have many applications: they generate X-rays and high energy electrons for medicinal purposes in radiation therapy, serve as particle injectors for higher-energy accelerators, and are used directly to achieve the highest kinetic energy for light particles for particle physics.

<span class="mw-page-title-main">Large Hadron Collider</span> Particle accelerator at CERN, Switzerland

The Large Hadron Collider (LHC) is the world's largest and highest-energy particle collider. It was built by the European Organization for Nuclear Research (CERN) between 1998 and 2008 in collaboration with over 10,000 scientists and hundreds of universities and laboratories, as well as more than 100 countries. It lies in a tunnel 27 kilometres (17 mi) in circumference and as deep as 175 metres (574 ft) beneath the France–Switzerland border near Geneva.

<span class="mw-page-title-main">Large Electron–Positron Collider</span> Particle accelerator at CERN, Switzerland

The Large Electron–Positron Collider (LEP) was one of the largest particle accelerators ever constructed. It was built at CERN, a multi-national centre for research in nuclear and particle physics near Geneva, Switzerland.

<span class="mw-page-title-main">Synchrotron</span> Type of cyclic particle accelerator

A synchrotron is a particular type of cyclic particle accelerator, descended from the cyclotron, in which the accelerating particle beam travels around a fixed closed-loop path. The magnetic field which bends the particle beam into its closed path increases with time during the accelerating process, being synchronized to the increasing kinetic energy of the particles. The synchrotron is one of the first accelerator concepts to enable the construction of large-scale facilities, since bending, beam focusing and acceleration can be separated into different components. The most powerful modern particle accelerators use versions of the synchrotron design. The largest synchrotron-type accelerator, also the largest particle accelerator in the world, is the 27-kilometre-circumference (17 mi) Large Hadron Collider (LHC) near Geneva, Switzerland, built in 2008 by the European Organization for Nuclear Research (CERN). It can accelerate beams of protons to an energy of 6.5 tera electronvolts (TeV or 1012 eV).

<span class="mw-page-title-main">KEK</span> Japanese high-energy physics organization

The High Energy Accelerator Research Organization, known as KEK, is a Japanese organization whose purpose is to operate the largest particle physics laboratory in Japan, situated in Tsukuba, Ibaraki prefecture. It was established in 1997. The term "KEK" is also used to refer to the laboratory itself, which employs approximately 695 employees. KEK's main function is to provide the particle accelerators and other infrastructure needed for high-energy physics, material science, structural biology, radiation science, computing science, nuclear transmutation and so on. Numerous experiments have been constructed at KEK by the internal and international collaborations that have made use of them. Makoto Kobayashi, emeritus professor at KEK, is known globally for his work on CP-violation, and was awarded the 2008 Nobel Prize in Physics.

<span class="mw-page-title-main">Super Proton Synchrotron</span> Particle accelerator at CERN, Switzerland

The Super Proton Synchrotron (SPS) is a particle accelerator of the synchrotron type at CERN. It is housed in a circular tunnel, 6.9 kilometres (4.3 mi) in circumference, straddling the border of France and Switzerland near Geneva, Switzerland.

<span class="mw-page-title-main">HERA (particle accelerator)</span>

HERA was a particle accelerator at DESY in Hamburg. It was operated from 1992 to 30 June 2007. At HERA, electrons or positrons were brought to collision with protons at a center-of-mass energy of 320 GeV. HERA was used mainly to study the structure of protons and the properties of quarks, laying the foundation for much of the science done at the Large Hadron Collider (LHC) at the CERN particle physics laboratory today. HERA is the only lepton–proton collider in the world to date and was on the energy frontier in certain regions of the kinematic range.

<span class="mw-page-title-main">Proton Synchrotron</span> CERNs first synchrotron accelerator

The Proton Synchrotron is a particle accelerator at CERN. It is CERN's first synchrotron, beginning its operation in 1959. For a brief period the PS was the world's highest energy particle accelerator. It has since served as a pre-accelerator for the Intersecting Storage Rings (ISR) and the Super Proton Synchrotron (SPS), and is currently part of the Large Hadron Collider (LHC) accelerator complex. In addition to protons, PS has accelerated alpha particles, oxygen and sulfur nuclei, electrons, positrons, and antiprotons.

NICA is a particle collider complex being constructed by the Joint Institute for Nuclear Research in Dubna, Russia to perform experiments such as Nuclotron ion beams extracted to a fixed target and colliding beams of ions, ions-protons, polarized protons and deuterons. The projected maximum kinetic energy of the accelerated ions is 4.5 GeV per nucleon, and 12.6 GeV for protons.

The High Luminosity Large Hadron Collider is an upgrade to the Large Hadron Collider, operated by the European Organization for Nuclear Research (CERN), located at the French-Swiss border near Geneva. From 2011 to 2020, the project was led by Lucio Rossi. In 2020, the lead role was taken up by Oliver Brüning.

<span class="mw-page-title-main">Alternating Gradient Synchrotron</span> Particle accelerator at Brookhaven National Laboratory

The Alternating Gradient Synchrotron (AGS) is a particle accelerator located at the Brookhaven National Laboratory in Long Island, New York, United States.

<span class="mw-page-title-main">Particle accelerator</span> Research apparatus for particle physics

A particle accelerator is a machine that uses electromagnetic fields to propel charged particles to very high speeds and energies, and to contain them in well-defined beams.

<span class="mw-page-title-main">Low Energy Ion Ring</span> Particle accelerator at CERN

The Low Energy Ion Ring (LEIR) is a particle accelerator at CERN used to accelerate ions from the LINAC 3 to the Proton Synchrotron (PS) to provide ions for collisions within the Large Hadron Collider (LHC).

<span class="mw-page-title-main">CERN Hadron Linacs</span> Group of particle accelerators

The CERN Hadron Linacs are linear accelerators that accelerate beams of hadrons from a standstill to be used by the larger circular accelerators at the facility.

An energy recovery linac (ERL) provides a beam of electrons used to produce x-rays by synchrotron radiation. First proposed in 1965 the idea gained interest since the early 2000s.

<span class="mw-page-title-main">LHeC</span> Accelerator study for a possible upgrade of the existing LHC storage ring

The Large Hadron Electron Collider (LHeC) is an accelerator study for a possible upgrade of the existing LHC storage ring - the currently highest energy proton accelerator operating at CERN in Geneva. By adding to the proton accelerator ring a new electron accelerator, the LHeC would enable the investigation of electron-proton and electron-ion collisions at unprecedented high energies and rate, much higher than had been possible at the electron-proton collider HERA at DESY at Hamburg, which terminated its operation in 2007. The LHeC has therefore a unique program of research, as on the substructure of the proton and nuclei or the physics of the newly discovered Higgs boson. It is an electron–ion collider, similar to the plans in the US and elsewhere, although the present design would not include polarized protons.

<span class="mw-page-title-main">Super Proton–Antiproton Synchrotron</span> Particle accelerator at CERN

The Super Proton–Antiproton Synchrotron was a particle accelerator that operated at CERN from 1981 to 1991. To operate as a proton-antiproton collider the Super Proton Synchrotron (SPS) underwent substantial modifications, altering it from a one beam synchrotron to a two-beam collider. The main experiments at the accelerator were UA1 and UA2, where the W and Z bosons were discovered in 1983. Carlo Rubbia and Simon van der Meer received the 1984 Nobel Prize in Physics for their contributions to the SppS-project, which led to the discovery of the W and Z bosons. Other experiments conducted at the SppS were UA4, UA5 and UA8.

<span class="mw-page-title-main">LEP Pre-Injector</span>

The LEP Pre-Injector (LPI) was the initial source that provided electrons and positrons to CERN's accelerator complex for the Large Electron–Positron Collider (LEP) from 1989 until 2000.

References

  1. ↑ "CERN – Division PS – LHC-PS project" Retrieved on 09 July 2018
  2. 1 2 "Klaus Hanke: Past and Present of the CERN PS Booster (2013)" Retrieved on 10 July 2018
  3. ↑ "S Gilardoni, D. Mangluki: Fifty years of the CERN Proton Synchrotron Vol. II (2013)" Retrieved on 10 July 2018
  4. 1 2 "The Second Stage CMS Improvement Study: 800 MeV Booster Synchrotron (1967)" Retrieved on 10 July 2018
  5. ↑ "E. Boltezer et al: The New CERN 50-MeV LINAC (1979)" Retrieved on 10 July 2018
  6. ↑ "CERN Annual Report 1988 Vol. II (french), page 104" Retrieved on 11 July 2018
  7. ↑ "Belochitskii et al.: LEIR Commissioning (2006)" Retrieved on 11 July 2018
  8. ↑ "CERN ISOLDE Website: History" Retrieved on 10 July 2018
  9. ↑ "C. Carli: Proceedings of the Chamonix 2010 Workshop on LHC Performance" Retrieved on 10 July 2018
  10. ↑ "PBS machine overview: Sketch of period 1" Retrieved on 10 July 2018
  11. ↑ "CERN Annual Report 2017, page 23" Retrieved on 11 July 2018
  12. ↑ "CERN Website: ISOLDE Facility" Retrieved on 10 July 2018
  13. ↑ "MEDICIS shows its strength". CERN Courier. 2020-12-18. Retrieved 2023-07-10.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.