42-volt electrical system

Last updated

In automobiles, a 42-volt electrical system was an electrical power standard proposed in the late 1990s. It was intended to facilitate increasingly-powerful electrically-driven accessories in automobiles, and lighter wiring harnesses. Electric motors were proposed to be used for power steering or other systems, providing more compact installations and eliminating the weight of drive belts or large wires for high-current loads.

Contents

The proposed new standard was exactly triple the voltage of existing "12-volt" systems. The higher voltage was selected to provide greater power capacity for wiring and devices on one hand, and to stay under the 50-volt limit used as a guideline for electric shock hazard. The European auto manufacturer Daimler-Benz proposed a 42V brand name for the conversion.

Although many manufacturers were predicting a switch to 36-volt (lithium-ion battery) / 42-volt (charging voltage) electrical systems, the "42V" changeover did not occur by early in the 21st century, and plans were mostly abandoned by 2009. [1] The availability of higher-efficiency motors, new wiring techniques and digital controls, and a focus on hybrid vehicle systems that use high-voltage starter/generators largely eliminated the 2000s cross-industry push for raising the main automotive voltages. [1] Applications that once were thought to require higher voltages, such as electrical power steering, were subsequently achieved with 12-volt systems. [1] In the late 2000s, 42-volt electrical components were used in only a few automotive applications, since incandescent light bulbs work well at 12 volts and switching of a 42-volt circuit is more difficult. [1] [2]

In the 2010s, 48-volt electrical systems became popular.

History

USA – Consortium on Advanced Automotive Electrical and Electronic Systems

The SAE discussed an increased automobile standard voltage as early as 1988. [3]

In 1994, at the initiative of Daimler-Benz, the first "Workshop on Advanced Architectures for Automotive Electrical Distribution Systems" was held at the Massachusetts Institute of Technology Laboratory for Electromagnetic and Electronic Systems (MIT/LEES) in Cambridge, Massachusetts USA. with the aim of defining the architecture for a future automotive electrical system. From the outset, the participants in this workshop included suppliers as well as the automobile companies Daimler-Benz, Ford and General Motors.

In September 1995, various electrical systems architectures were compared at MIT using the tool "MAESTrO", and in December 1995, in the "Conclusions" of this study, a future voltage level of approximately 40 V was defined.

In early 1996, the "Consortium on Advanced Automotive Electrical and Electronic Systems" was set up. At the ensuing workshop in March 1996, the future nominal voltage of 42 V was confirmed.

In August 1996, IEEE Spectrum [4] published the paper "Automotive electrical systems circa 2005".

On the occasion of the October 1996 Convergence in Detroit, Professor John G. Kassakian (MIT) gave a talk entitled "The Future of Automotive Electrical Systems" as part of the "IEEE Workshop on Automotive Power- Electronics".

On March 24, 1997, Daimler-Benz presented the MIT with a "Draft Specification of a Dual Voltage Vehicle Electrical Power System 42V/14V".

Europe

At the same time as the activities in the USA, in 1994, again at the initiative of Daimler-Benz, the former SICAN GmbH held its first "Forum Bordnetz" (Vehicle Electrical System Forum) in Hanover for German automobile companies. Here too, suppliers were invited to participate at a very early stage, together with all European vehicle manufacturers.

On February 15, 1996, the introductory paper "Bordnetzarchitektur im Jahr 2005" (Automotive electrical system architecture for the year 2005) was agreed, and on June 4, 1996, BMW presented the "Tabelle heutiger und zukünftiger Verbraucher im Kfz" (Table of present and future loads in the motor vehicle) and the "42V/14V-Bordnetz" (42V/14V PowerNet).

On September 13, 1996, at the 7th International Technical Meeting for Vehicle Electronics in Baden-Baden, considerable interest was raised by the paper "Neue Bordnetz- Architektur und Konsequenzen" (New Automotive Electrical System Architecture and Consequences), presented by Dr. Richard D. Tabors (MIT).

On March 6, 1997, BMW presented the "Spezifikationsentwurf für das Zwei-Spannungsbordnetz 42V/14V" (Draft Specification of a Dual Voltage Vehicle Electrical Power System 42V/14V) in Hanover.

The work at SICAN GmbH was given decisive impetus by the cooperation between BMW and Daimler-Benz, as witnessed in their joint definition of the European "Load List 2005" and the jointly authored "Draft Specification of a Dual Voltage Vehicle Electrical Power System 42V/14V".

Volvo has used 42V for some of its mild hybrids. [5] [6]

48-volt electrical system

The increased adoption of hybrid vehicle technologies in the 2010s led to 48-volt systems being deployed in mild hybrid vehicles, which add electric boost to the typical internal combustion engine (ICE) propulsion, and facilitates some regeneration during braking for fuel savings. [7]

In 2011, several German car makers agreed on a 48V on-board electric power supply network on top of the current 12V network and introduced the "Combo plug", a common power plug for DC charging electric vehicles. [8] As of 2018, this 48-volt electrical system had been applied in production vehicles such as Porsche and Bentley SUVs, while Volvo and Audi planned to use the 48-volt standard in 2019 vehicles. [9] [ needs update ]

In March 2023, Tesla Inc. began production of the Cybertruck with a 48-volt architecture, [10] the first production vehicle to use 48 volts as the system voltage for the entire low-voltage system. They have indicated that their next-generation vehicle will also be utilizing a 48 V low-voltage electrical system as well. [11]

Choice of voltage

Six-cell lead-acid batteries produce around 12.6 volts while discharging, and their corresponding automotive alternators are designed to produce 13.5 to 14.5 volts during charging. [1] 42 volts is an approximation of the output of the new standard's charging system. [2] The present nominally 12 V automotive electrical system usually operates around 13.8 volts, so 14 V is descriptive. Literature on 42-volt electrical systems often refers to systems powered with a 6-cell lead-acid battery as nominally 14 volts. Depending on operating conditions, the vehicle electrical system voltage today can vary between 6.5 and 16 V, with a varying degree of ripple superimposed on this value.

After extensive preparatory work, resulting in the "List of Loads in the Automobile of the Year 2005", various automotive electrical system architectures were compared using the tool "MAESTrO" (12 V,12 V/24 V DC,12 V/48 V DC and 12 V/60 V AC) in the September 1995 workshop at the Massachusetts Institute of Technology (MIT/LEES). The finding of this study was that the highest possible direct voltage was the best alternative.

The limiting factor for direct voltages is a shock-hazard protection limit of 60 V, which must not be exceeded even during voltage fluctuations caused by extreme conditions. This limit eliminates the option of an automotive electrical system with a nominal battery voltage of 48 V, because at low temperatures the charging voltage of the battery can attain 60 V. Also, the price, weight and volume of batteries are influenced by the number of cells, which must therefore be kept to a minimum.

New battery technologies for automotive applications would not have been available at affordable costs for the 42 V/14 V PowerNet. Lead-acid batteries are low-priced and have a very "compliant" charging/discharging characteristic. Therefore, lead-acid batteries would have been used optimised for energy and service life at the lower voltage and optimised for power at the higher voltage.

Another important criterion for a new architecture was that it should allow gradual conversion of loads to the higher voltage system as required.

In a 42 V/14 V system, the 14 V branch should have been freed of higher-power loads and should operate within much narrower limits.

Power electronics is becoming increasingly important in the automotive sphere and will be a decisive factor in the price of future vehicles. This criterion was therefore especially important when selecting the most suitable higher voltage level. Despite the considerable upward trend of power electronics in automotive applications, its share of the market will decline, because growth rates in other market segments are even higher. For that reason alone, a specific manufacturing technology for automotive use is inconceivable.[ citation needed ]

In intensive discussions with the major semiconductor manufacturers, a voltage of approximately 40 V was found to be advantageous. Many arguments are summarised in the paper "Intelligente Leistungshalbleiter für zukünftige Kfz-Bordnetze" [12] ("Intelligent Power Semiconductors for Future Automotive Electrical Systems" [13] ) presented by the former Siemens Semiconductors (now Infineon) at the 17th "Elektronik im Kraftfahrzeug" (In-Car Electronics) conference on June 3/4, 1997 in Munich.

Other arguments for a higher voltage included the reduction of weight in the wiring system, improved stability, and reduced voltage drop. With three times the voltage, thick conductors can be reduced to a third of the cross-section, and at the same time the relative voltage drop can also be reduced to a third. For the same cross-section, the relative voltage drop is now no more than one ninth. The voltage level resulting from these arguments was so close to three times the present voltage that 42 V became the automatic choice for the second voltage level.

See also

Related Research Articles

<span class="mw-page-title-main">Direct current</span> Unidirectional flow of electric charge

Direct current (DC) is one-directional flow of electric charge. An electrochemical cell is a prime example of DC power. Direct current may flow through a conductor such as a wire, but can also flow through semiconductors, insulators, or even through a vacuum as in electron or ion beams. The electric current flows in a constant direction, distinguishing it from alternating current (AC). A term formerly used for this type of current was galvanic current.

<span class="mw-page-title-main">Nickel–metal hydride battery</span> Type of rechargeable battery

A nickel–metal hydride battery is a type of rechargeable battery. The chemical reaction at the positive electrode is similar to that of the nickel-cadmium cell (NiCd), with both using nickel oxide hydroxide (NiOOH). However, the negative electrodes use a hydrogen-absorbing alloy instead of cadmium. NiMH batteries can have two to three times the capacity of NiCd batteries of the same size, with significantly higher energy density, although only about half that of lithium-ion batteries.

<span class="mw-page-title-main">Power inverter</span> Device that changes direct current (DC) to alternating current (AC)

A power inverter, inverter, or invertor is a power electronic device or circuitry that changes direct current (DC) to alternating current (AC). The resulting AC frequency obtained depends on the particular device employed. Inverters do the opposite of rectifiers which were originally large electromechanical devices converting AC to DC.

<span class="mw-page-title-main">DC connector</span> Electrical connector for carrying DC power

A DC connector is an electrical connector for supplying direct current (DC) power.

<span class="mw-page-title-main">Fuse (electrical)</span> Electrical safety device that provides overcurrent protection

In electronics and electrical engineering, a fuse is an electrical safety device that operates to provide overcurrent protection of an electrical circuit. Its essential component is a metal wire or strip that melts when too much current flows through it, thereby stopping or interrupting the current. It is a sacrificial device; once a fuse has operated, it is an open circuit, and must be replaced or rewired, depending on its type.

<span class="mw-page-title-main">Automobile accessory power</span> Power in cars

Automobile accessory power can be transferred by several different means. However, it is always ultimately derived from the automobile's internal combustion engine, battery, or other "prime mover" source of energy. The advent of high-powered batteries in hybrid and all-electrical vehicles is shifting the balance of technologies even further in the direction of electrically powered accessories.

<span class="mw-page-title-main">Automotive battery</span> Rechargeable battery for starting a cars combustion engine

An automotive battery, or car battery, is a rechargeable battery that is used to start a motor vehicle. Its main purpose is to provide an electric current to the electric-powered starting motor, which in turn starts the chemically-powered internal combustion engine that actually propels the vehicle. Once the engine is running, power for the car's electrical systems is still supplied by the battery, with the alternator charging the battery as demands increase or decrease.

Hybrid Synergy Drive (HSD), also known as Toyota Hybrid System II, is the brand name of Toyota Motor Corporation for the hybrid car drive train technology used in vehicles with the Toyota and Lexus marques. First introduced on the Prius, the technology is an option on several other Toyota and Lexus vehicles and has been adapted for the electric drive system of the hydrogen-powered Mirai, and for a plug-in hybrid version of the Prius. Previously, Toyota also licensed its HSD technology to Nissan for use in its Nissan Altima Hybrid. Its parts supplier Aisin Seiki Co. offers similar hybrid transmissions to other car companies.

<span class="mw-page-title-main">Extra-low voltage</span> Electrical standard designed to protect against electric shock

Extra-low voltage (ELV) is an electricity supply voltage and is a part of the low-voltage band in a range which carries a low risk of dangerous electrical shock. There are various standards that define extra-low voltage. The International Electrotechnical Commission (IEC) and the UK IET define an ELV device or circuit as one in which the electrical potential between two conductors or between an electrical conductor and earth (ground) does not exceed 50 V AC or 120 V DC.

In electronics, voltage drop is the decrease of electric potential along the path of a current flowing in a circuit. Voltage drops in the internal resistance of the source, across conductors, across contacts, and across connectors are undesirable because some of the energy supplied is dissipated. The voltage drop across the load is proportional to the power available to be converted in that load to some other useful form of energy.

<span class="mw-page-title-main">Henney Kilowatt</span> Motor vehicle

The Henney Kilowatt was an electric car introduced in the United States of America for the 1959 model year. The car used some body parts as made for the Renault Dauphine. An improved model was introduced in 1960 with a top speed of 60 miles an hour and a range of 60 miles. Only 47 cars were sold over the two model years, mostly to electrical utility companies. Only a few still exist.

<span class="mw-page-title-main">Battery charger</span> Device used to provide electricity

A battery charger, recharger, or simply charger, is a device that stores energy in a battery by running an electric current through it. The charging protocol depends on the size and type of the battery being charged. Some battery types have high tolerance for overcharging and can be recharged by connection to a constant voltage source or a constant current source, depending on battery type. Simple chargers of this type must be manually disconnected at the end of the charge cycle. Other battery types use a timer to cut off when charging should be complete. Other battery types cannot withstand over-charging, becoming damaged, over heating or even exploding. The charger may have temperature or voltage sensing circuits and a microprocessor controller to safely adjust the charging current and voltage, determine the state of charge, and cut off at the end of charge. Chargers may elevate the output voltage proportionally with current to compensate for impedance in the wires.

Mild hybrids (MHEV) are generally cars with an internal combustion engine (ICE) equipped with a negligibly bigger electric combined motor and generator in a parallel hybrid configuration allowing the engine to be turned off whenever the car is coasting, braking, or stopped, and then quickly restarted once power is again required. Mild hybrids may employ regenerative braking and some level of power assist to the internal combustion engine, but mild hybrids do not have an electric-only mode of propulsion.

Hybrid vehicle drivetrains transmit power to the driving wheels for hybrid vehicles. A hybrid vehicle has multiple forms of motive power.

Load dump means the disconnection of a powered load. It can cause two problems:

<span class="mw-page-title-main">Automobile auxiliary power outlet</span> Outlet for portable accessories

An automobile auxiliary power outlet in an automobile was initially designed to power an electrically heated cigarette lighter, but became a de facto standard DC connector to supply electrical power for portable accessories used in or near an automobile directly from the vehicle's electrical system. Such include mobile phone chargers, cooling fans, portable fridges, electric air pumps, and power inverters.

<span class="mw-page-title-main">Dräxlmaier Group</span> German automotive company

The Dräxlmaier Group is a globally operating automotive supplier with its headquarters in the Lower Bavarian city of Vilsbiburg, Germany. Founded in 1958, the family-owned company specializes in the production of wiring harness systems, central electrical and electronic components, interiors, and low- and high-voltage battery systems for electric mobility for premium vehicles.

Automotive electronics are electronic systems used in vehicles, including engine management, ignition, radio, carputers, telematics, in-car entertainment systems, and others. Ignition, engine and transmission electronics are also found in trucks, motorcycles, off-road vehicles, and other internal combustion powered machinery such as forklifts, tractors and excavators. Related elements for control of relevant electrical systems are also found on hybrid vehicles and electric cars.

<span class="mw-page-title-main">Anderson Powerpole</span> Family of electrical connectors

The Anderson Powerpole is a family of electrical connectors by Anderson Power Products (APP), although plug compatible connectors are now available from alternate sources. Specific variants of this series of connectors have become de facto standards for conveying "higher power" direct current (DC) electrical power, although these standards are inconsistent and sometimes ignored.

A 48-volt DC electrical system voltage is a relatively low-voltage electrical system that is increasingly used in vehicles. It began in the 2010s as a way to increase the propulsion and battery recharge during braking for fuel savings in internal combustion engine vehicles, especially mild hybrid vehicles.

References

  1. 1 2 3 4 5 Mike Allen (October 1, 2009). "Whatever Happened to the 42-Volt Car?". Popular Mechanics . Retrieved 2010-05-14.
  2. 1 2 Holt, D., ed. (2003). The Forty-two volt electrical system. Society of Automotive Engineers. ISBN   0-7680-1297-X.
  3. ↑ Randy Rundle (March 2002). "The Coming 42-Volt Electrical System" (PDF). Electrical Rebuilder’s Exchange. Archived from the original (PDF) on 2010-06-15. Retrieved 2010-05-14.
  4. ↑ "Automotive Electrical Systems Circa 2005". Archived from the original on May 6, 2011. Retrieved 2011-12-02.
  5. ↑ "Integrated Starter Generator (ISG)". www.media.volvocars.com.
  6. ↑ "On_the_Suitability_of_Low-Voltage_42_V_Electrical_Power_System_for_Traction_Applications_in_the_Parallel_Hybrid_Electric_Vehicles".
  7. ↑ Tracy, David (January 13, 2017). "Everything You Need To Know About The Upcoming 48-Volt Electrical Revolution In Cars". Jalopnik .
  8. ↑ Hammerschmidt, Christoph (June 16, 2011). "German carmakers agree on 48V on-board supply, charging plug". eeNews Automotive.
  9. ↑ Mayersohn, Norman (February 8, 2018). "To Power the Future, Carmakers Flip on 48-Volt Systems". The New York Times .
  10. ↑ Sandy Munro, Lars Moravy, Franz von Holzhausen, Drew Baglino, Pete Bannon, David Lau (December 11, 2023). Cybertruck DEEP DIVE with 5 Tesla Executives!. Austin, Texas: Munro Live. Event occurs at 5:15:7:04, 14:45–18:00. Archived from the original on December 11, 2023. Retrieved December 12, 2023– via YouTube.
  11. ↑ "Tesla Confirms The Switch To 48 Volt System". InsideEVs. Retrieved 2023-05-23.
  12. ↑ "Intelligente Leistungshalbleiter für zukünftige Kfz-Bordnetze" (PDF). Archived from the original (PDF) on 2011-08-27. Retrieved 2011-12-01.
  13. ↑ "Intelligent Power Semiconductors for Future Automotive Electrical Systems" (PDF). Archived from the original (PDF) on 2011-08-13. Retrieved 2011-12-01.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.