Manufacturer | Associated Motorcycles Plumstead, London |
---|---|
Also called | Sceptre Sports |
Engine | 348 cc OHV air cooled single |
Top speed | 78 mph (126 km/h) |
Power | 16 bhp (12 kW) @5,600 rpm |
Transmission | Four speed gearbox to chain final drive |
Suspension | teledraulic forks, swinging arm rear |
Brakes | drum brakes |
Tires | 19 in front and rear |
Wheelbase | 56 inches (140 cm) |
Seat height | 32 inches (81 cm) |
Weight | 382 pounds (173 kg) (dry) |
The AJS Model 16 was a British motorcycle made by Associated Motorcycles at the former Matchless works in Plumstead, London.
The rigid framed AJS Model 16M 350 cc single was developed in 1945 from the military Matchless G3/L World War II motorcycle. Well proven in war service, the 350 cc single remained in production selling large numbers to the civilian market well into the 1960s. Simple and practical, the Model 16 needed minimal maintenance and was very economical—ideal during petrol rationing. The company also produced an almost identical motorcycle under the Matchless name as the Matchless G3L. [1] The only difference between the two was that the Matchless carried a magneto at the rear of the cylinder barrel, whereas the AJS magneto was at the front. [2]
In 1953, the Model 16M was modernised with a dual seat replacing the saddle and rear pillion seat. In 1956 the Burman gearbox was replaced with a new four speed unit of AMC's own design and in 1957 further improvements included replacement of the outdated generator with a crankshaft mounted Lucas alternator. The leaky pressed-steel primary drive cover was replaced with an alloy casing. [3]
Neither AJS or Matchless opted for plunger type rear springing, and the Model 16 retained a rigid rear frame until 1949, when pivoted rear suspension controlled by hydraulically dampened spring units designed and made by Matchless became available. The difference was indicated by the S (for springer) designation. [2]
The rugged and reliable AJS Model 16 was ideal for the increasingly popular sport of motorcycle trials. Gaining a C (for competition) designation, modifications included upgrading the frame to a welded duplex tubular frame with an engine cradle to reduce weight and redesigned exhaust and footrests to improve ground clearance. In 1957 it was further redesigned to increase clearance from 7 to 10 inches (180 to 250 mm). [4] Hugh Viney led the AJS works team in the post war years and won the challenging 1947 Scottish Six Days Trial on an AJS 16MC at his first attempt—then repeated the achievement the following year and made it three in a row in 1949. In the 1950s this record was beaten by another AJS Works Team rider Gordon Jackson, who won the Scottish Trial four times. [5]
In 1964 the AJS Model 16C was launched with a completely redesigned 348 cc engine in which the pushrods were housed in cast cylinder barrel 'tunnels'. The 16C also had a Norton-designed geared oil pump to improve lubrication. [4]
To boost US sales the AMC marketing team rebranded the ageing export Model 16 with the new name The Sceptre with new metal tank badges and steel flywheels instead of the old cast iron ones. The compression ratio was also raised to 9:1 and the competition also Norton designed geared oil pump was also fitted as standard. [3]
The Norton Motorcycle Company is a brand of motorcycles, originally based in Birmingham, England. For some years around 1990, the rights to use the name on motorcycles was owned by North American financiers. Later, a line of motorcycles was produced under Chief Executive Stuart Garner. Due to financial failure with large debts, in April 2020 administrators BDO agreed to sell certain aspects of Garner's business to Project 303 Bidco Limited, a new business established for the purpose with links to Indian motorcycle producer TVS Motor Company.
A. J. Stevens & Co. Ltd was a British automobile and motorcycle manufacturer in operation from 1909 to 1931. The company was founded by Joe Stevens in Wolverhampton, England. After the firm was sold, the name continued to be used by Matchless, Associated Motorcycles and Norton-Villiers on four-stroke motorcycles till 1969, and since the name's resale in 1974, on lightweight, two-stroke scramblers and today on small-capacity roadsters and cruisers. The company held 117 motorcycle world records.
Matchless is one of the oldest marques of British motorcycles, manufactured in Plumstead, London, between 1899 and 1966. A wide range of models was produced under the Matchless name, ranging from small two-strokes to 750 cc four-stroke twins. Matchless had a long history of racing success; a Matchless ridden by Charlie Collier won the first single-cylinder race in the first Isle of Man TT in 1907.
Associated Motor Cycles (AMC) was a British motorcycle manufacturer founded by the Collier brothers as a parent company for the Matchless and AJS motorcycle companies. It later absorbed Francis-Barnett, James, and Norton before incorporation into Norton-Villiers. Henry Herbert Collier founded Matchless as a cycle company in 1878. His sons Henry (Harry) and Charles (Charlie) joined him and the name was changed to H. Collier & Sons.
Norton-Villiers was a British motorcycle manufacturer formed in the 1960s following the collapse of AMC. With the general decline of the British motorcycle industry, under a British Government initiative it was later combined with the remnants of BSA Triumph to form Norton-Villiers-Triumph.
The AJS 500 cc Porcupine was a British racing motorcycle built by Associated Motor Cycles (AMC), which débuted in 1945 with a horizontal-engine designated E90S. A later E95 model was developed with an inclined-engine. AMC produced AJS and Matchless brands at the time.
The Matchless G80 is a single cylinder 500 cc British motorcycle built by Associated Motorcycles (AMC) between 1946 and 1966. During the 1950s and 1960s, the main export product for AMC was the AJS/Matchless range – the road bikes were very similar, often with only the badges distinguishing one marque from the other; the equivalent AJS being the Model 18.
Peter Williams is a British former professional motorcycle racer. He competed in Grand Prix motorcycle road racing from 1966 to 1973. He also competed at many levels on home short-circuit races. He raced many times on the Isle of Man TT course from 1966 to 1973. His father was Jack Williams who ran the Associated Motor Cycles (AMC) race department. Williams trained in mechanical engineering and introduced via racing an innovation which is commonplace on today's road bikes, alloy wheels, and was an early pioneer of disc brakes.
The AJS 500cc Model 18 and AJS Model 18S are 500 cc British motorcycles almost identical to the Matchless G80 and both were produced in the same Associated Motor Cycles (AMC) London factory from 1945 to 1966. These bikes represent the end of the era of big British singles, as when AMC merged with Norton production concentrated on twins.
The Matchless G50 is an historic racing British motorcycle made by Associated Motorcycles (AMC) at the former Matchless works in Plumstead, London. Developed in 1958 from the 350 cc AJS 7R, but with the engine capacity increased to 500 cc, 180 G50s were built in the next four years. Although less powerful than its main competitor the Norton Manx the G50 proved highly competitive at three hundred pounds and was faster round bends. If success is measured by longevity then this is the most successful Matchless motorcycle, and high specification replicas are still being produced to this day, although financial problems at AMC ended production in 1963.
The Dominator is a twin cylinder motorcycle developed by Norton to compete against the Triumph Speed Twin. The original Dominator was designed in 1947 and 1948 by Bert Hopwood, who had been on the Speed Twin design team at Triumph. Available for sale from mid 1949, this design set the pattern for Norton twins for the next 30 years.
The Matchless G12 is a British motorcycle made by Associated Motorcycles at the former Matchless works in Plumstead, London. Developed in 1958 specifically to capture the potentially lucrative US market, the last G12 was produced in 1966.
The AJS Model 31 was a British motorcycle made by Associated Motorcycles at the former Matchless works in Plumstead, London. Developed in 1958 specifically to capture the potentially lucrative US market, the last Model 31 was produced in 1966.
The Matchless G9 is a British motorcycle made by Associated Motorcycles at the former Matchless works in Plumstead, London. The G9 was finally discontinued with the introduction of the 646 cc Matchless G12 in the autumn of 1958.
The AJS Model 20 was a British motorcycle made by Associated Motorcycles at the former Matchless works in Plumstead, London. The Model 20 was finally discontinued when the 646 cc AJS Model 31 replaced it in the autumn of 1958.
The BSA A7 was a 500cc motorcycle model range made by Birmingham Small Arms Company (BSA) at their factory in Armoury Road, Small Heath, Birmingham. The range was launched in 1946 using a 495 cc (30.2 cu in) long stroke engine. An improved 497 cc (30.3 cu in) version based on the BSA A10 engine was launched in 1950. The various A7 models continued in production with minor modifications until 1961/2 when they were superseded by the unit-construction A50 model.
The Douglas Mark III is a British motorcycle designed and built by Douglas motorcycles in Bristol between 1948 and 1949. The 350 cc flat twin engine in the Douglas Mark III was based on a Second World War electricity generator. As well as the 1948-9 Douglas Mark III, Douglas also produced a Mark III "De Luxe", a Mark III Sports, and a rigid-framed motorcycle trials Competition version.
The AJS Model D is a British motorcycle made by A. J. Stevens & Co. Ltd in Wolverhampton between 1912 and 1925. With production halted by the First World War AJS managed to develop the Model D into a popular sidecar machine and it was eventually replaced by the larger capacity AJS Model E.
The BSA C15 was a 250 cc single-cylinder ohv motorcycle manufactured by the British company BSA from September 1958 until 1967, and was BSA's first four-stroke unit-construction bike. For most of that period, after the introduction of 'Learner Laws' in 1961, a 250 cc was the largest capacity solo machine that a learner could ride unaccompanied when displaying L-plates in the United Kingdom. A road-going Sports derivative was added in 1961, and off-road versions, for Trials and Scrambles, were also available in the range.
The isolastic frame, designated by Norton as GlideRide, used a system of engine-to-frame mountings incorporating rubber bushes to isolate the vibration of the vertical twin engine from the frame and rider. The isolastic frame was developed for use with the Commando inclined engine, whilst the Featherbed frame continued in production for the Mercury with a softer-specification 650 cc vertical-engine until 1970.