ALCO RS-3m | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||
| |||||||||||
|
The ALCO RS-3m is a diesel-electric locomotive rebuilt from an ALCO RS-3 road switcher. These 98 locomotives were rebuilt to replace their original ALCO prime mover with the more reliable EMD 567B engine and fan assemblies taken from retired E8s. [1] Many of these rebuilds were performed by the ex NYC DeWitt shop with 56 completed at the ex PRR Juniata shop. The RS3m rebuild program started in 1972 and continued until 1978 under Conrail. [2] [3] [4]
Perhaps one of the earliest examples of the RS3m is the former Missouri-Kansas-Texas Railroad's RS3m fleet. Built in the early 1950s by ALCO, the Katy had them rebuilt in the late 1950s by ALCO competitor, EMD, who rebuilt them with GP9 long hoods to make room for the larger EMD 567 prime movers. [5]
The Chicago and North Western Railway had a pair of RS-3ms (1613 & 1624) that were rebuilt by ALCO in March 1960 using an 1,800 hp 12 cylinder ALCO 251-B engine and schedule 26L air brake components. [6] These featured long hoods from ALCO RS-11 road switchers. [7]
The Missouri Pacific Railroad had a fleet of RS-2s and RS-3s that were rebuilt in their North Little Rock shops, receiving the GP12 designation after rebuilding with EMD 567 engines. These look like normal Alco RS-3s with the addition of more exhaust stacks. [8] [9]
By the year 1958, the New Haven RR needed renewed power but couldn't afford new. They decided to rebuild the RS-3 fleet "in kind" as they were ten years old by that point. And for first-generation diesels, ten years was considered middle-aged. [10] Twenty one rebuilds were done by Alco in three groups. All the Alco rebuilds had the black cab/orange hood paint scheme and were able to Multiple Unit aka MU with later engines. Nose MU was added as well. [11] These rebuilds kept the original Alco 244 engines. The New Haven didn't have the problems that other roads did with their 244 engined locos.[ citation needed ]
The first rebuilds: Type I— kept their steam generator, and single bulb reflector headlights; #526 & #529 kept their buffer plates for diaphragms. #518, 526, 529, 549, & 553 were rebuilt May 1958 - June 1958. Type II— kept the steam generator but got twin sealed beam headlights. #533, 551, & 559 were rebuilt in October 1959. Type III— The steam generator and water tank were removed and got a concrete block instead. Headlights were replaced with a twin sealed beam headlights. They all received a raised area around the stack. Units rebuilt in early 1962 - #517, 520, 523, 527, 528, 534, 535, 537, 538, 545, 548, 557, & 558.
The New Haven RR itself rebuilt two units at their Lamberton Street Shop, numbers #542 & 543. These units kept their steam generators and single-bulb headlights but were not upgraded to nose-mounted Multiple Unit capability. Repainted in the black cab/orange hood paint scheme. The remaining 21 New Haven RS-3's were never rebuilt. [12]
There were RS-3ms working for the Penn Central Transportation Company. These locomotives were called the "DeWitt Geeps". One of the locomotives, PC #9950, was rebuilt with the short hood removed and left with what is known by railfans as an end-cab. A cab type similar to that of the S1, HH Series, or the EMD SW/SC/NW series of locomotives. This was the only end-cab RS-3m built.[ citation needed ]
In 1975, the Green Bay and Western Railroad started rebuilding their four RS-3 units numbers 306, 307, 308 & 309. [13] They lowered the nose and raised the long hood for the Alco 251e 2,000 hp engines. These rebuilds are called RS-20s. [14]
The Delaware and Hudson Railway had eight RS3u locomotives that were rebuilt by Morrison-Knudsen between December 1975 and March 1976. They received ALCO 12-251C prime movers, boosting horsepower from 1,600 to 2,000 hp (1,200 to 1,500 kW). M-K raised the long hood six inches (152 mm), moved the dynamic brake to behind the cab and cut-down the short hood. [15]
As of 2021, rebuilt RS-3s can be found in museums, on shortlines and as industrial switchers.
The GE U25B is General Electric's first independent entry into the United States domestic road switcher diesel-electric locomotive railroad market for heavy production road locomotives since 1936. From 1940 through 1953, GE participated in a design, production, and marketing consortium (Alco-GE) for diesel-electric locomotives with the American Locomotive Company. In 1956 the GE Universal Series of diesel locomotives was founded for the export market. The U25B was the first attempt at the domestic market since its termination of the consortium agreement with Alco.
The EMD GP30 is a 2,250 hp (1,680 kW) four-axle diesel-electric locomotive built by General Motors Electro-Motive Division of La Grange, Illinois between July 1961 and November 1963. A total of 948 units were built for railroads in the United States and Canada, including 40 cabless B units for the Union Pacific Railroad.
A hood unit, in North American railroad terminology, is a body style for diesel and electric locomotives where the body is less than full-width for most of its length and walkways are on the outside. In contrast, a cab unit has a full-width carbody for the length of the locomotive and walkways inside. A hood unit has sufficient visibility to be operated in both directions from a single cab. Also, the locomotive frame is the main load-bearing member, allowing the hood to be non-structural and easily opened or even removed for maintenance.
The EMD F7 is a model of 1,500-horsepower (1,100 kW) diesel-electric locomotive produced between February 1949 and December 1953 by the Electro-Motive Division of General Motors (EMD) and General Motors Diesel (GMD).
A road switcher locomotive is a type of railroad locomotive designed to both haul railcars in mainline service and shunt them in railroad yards. Both type and term are North American in origin, although similar types have been used elsewhere.
The ALCo Century 636 was the most powerful single-engine diesel-electric locomotive constructed by the American Locomotive Company (ALCo). It used their 251 prime mover. The locomotive had a C-C wheel arrangement and 3,600 horsepower (2,700 kW). The locomotive rode on a pair of trucks of all-new design, known as the Hi-Ad, standing for 'high adhesion'. Visually, it is similar to the Century 630, but can be distinguished by the intercooler box. The C630 has two grilles on the intercooler box, one above the other, whereas the C636 only has the upper grille.
The ALCO HH series was an early set of diesel switcher locomotives built by the American Locomotive Company (ALCO) of Schenectady, New York between 1931 and 1940, when they were replaced by the S series: the 660 hp (490 kW) S-1 and 1,000 hp (750 kW) S-2. They were ALCO's first diesel switchers to enter true series production, and among the first land vehicles anywhere to use the revolutionary diesel-electric power transmission.
The EMD SD60 is a 3,800 horsepower (2,800 kW), six-axle diesel-electric locomotive built by General Motors Electro-Motive Division, intended for heavy-duty drag freight or medium-speed freight service. It was introduced in 1984, and production ran until 1995.
The Livonia, Avon and Lakeville Railroad is a short line railroad that operates in Livingston County and Monroe County in New York, United States. The railroad interchanges with CSX at Genesee Junction in Chili, New York, the Rochester and Southern Railroad (RSR) at Genesee Junction and the RSR's Brooks Avenue Yard in Gates, New York, and with the Rochester & Genesee Valley Railroad Museum at Industry, New York. Their primary freight consists of food products: grains and corn syrup. In 1997, the Livonia, Avon and Lakeville Railroad was selected as Short Line Railroad of the Year by industry trade journal Railway Age. The LAL is also the parent company for the Bath and Hammondsport Railroad, the Western New York and Pennsylvania Railroad and the Ontario Midland Railroad.
The EMD GP7 is a four-axle (B-B) diesel-electric locomotive built by General Motors Electro-Motive Division and General Motors Diesel between October 1949 and May 1954.
The EMD SD45-2 is a 6-axle diesel-electric locomotive built by General Motors Electro-Motive Division (EMD). EMD built 136 locomotives between 1972 and 1974, primarily for the Atchison, Topeka and Santa Fe Railway (ATSF). The SD45-2 was an improved version of the EMD SD45; the primary visual difference is the absence of flared radiators on the SD45-2.
The ALCO RS-11 is a class of diesel-electric locomotive rated at 1,800 hp (1.34 MW), that rode on two-axle trucks, having a B-B wheel arrangement. This model was built by both Alco and Montreal Locomotive Works. Total production was 426 units.
The Commonwealth Railway, Inc. is a United States Class III short-line railroad operating 27 miles (43 km) of track of a former Norfolk, Franklin and Danville Railway line from Suffolk, Virginia, to Portsmouth, Virginia. The main office is in the Wilroy area of Suffolk. Commonwealth Railway was acquired by Genesee & Wyoming Inc. in 1996 and is a part of Norfolk Southern's "Thoroughbred Shortline Program". It interchanges with Norfolk Southern and CSX in Norfolk, Virginia.
The ALCO DL-109 was one of six models of A1A-A1A diesel locomotives built to haul passenger trains by the American Locomotive Company (ALCO) between December, 1939 and April, 1945. They were of a cab unit design, and both cab-equipped lead A units DL-103b, DL-105, DL-107, DL-109 and cabless booster B units DL-108, DL-110 models were built. The units were styled by noted industrial designer Otto Kuhler, who incorporated into his characteristic cab the trademark three-piece windshield design. A total of 74 cab units and four cabless booster units were built.
The EMD GP16 is a series of rebuilt diesel-electric locomotives, a result of a remanufacturing program initiated by the Seaboard Coast Line Railroad (SCL) in an effort to spare the cost of purchasing new motive power in the late 1970s. This involved the rebuilding of their aging fleet of EMD GP7, GP9 and GP18 road switchers. 155 locomotives were rebuilt by the SCL.
The EMD GP10 is a diesel-electric locomotive that is the result of rebuilding a GP7, GP9 or GP18.
The EMD GP11 is a four-axle diesel locomotive rebuilt by the Illinois Central Railroad's Paducah shops. It is very similar in appearance to the GP8 and GP10.
A B unit, in railroad terminology, is a locomotive unit which does not have a control cab or crew compartment, and must therefore be operated in tandem with another coupled locomotive with a cab. The terms booster unit and cabless are also used. The concept is largely confined to North America and post-Soviet countries. Elsewhere, locomotives without driving cabs are rare.
The United Railroad Historical Society of New Jersey, Inc. is a non-profit educational organization directed at supporting the preservation of New Jersey's historical railroad equipment and artifacts for the proposed New Jersey Transportation Heritage Center or in its absence, another railroad museum in New Jersey.
The Colebrookdale Railroad, also known as the Secret Valley Line or colloquially as The Colebrookdale, is a tourist railroad located in the U.S. state of Pennsylvania. The railroad operates between Boyertown in Berks County and Pottstown in Montgomery County.
Major differences include: The built up boxy structure added to end of the long hood; offset cooling fan; Built up "camel hump" 3-stack exhaust manifold, usually capped off by spark arresters; and removal of the old protruding number boards.