321 Faeta | |
---|---|
![]() | |
Role | Ultralight aircraft and Light-sport aircraft |
National origin | Czech Republic |
Manufacturer | ATEC v.o.s. |
Introduction | 2003 [1] |
Status | In production |
Developed from | ATEC 122 Zephyr 2000 |
The ATEC 321 Faeta is a Czech ultralight and light-sport aircraft, designed and produced by ATEC v.o.s. of Libice nad Cidlinou. It was developed from the earlier ATEC 122 Zephyr 2000. The aircraft is supplied as a complete ready-to-fly-aircraft. [2] [3] [4]
The Faeta was designed to comply with the Fédération Aéronautique Internationale microlight rules and US light-sport aircraft rules. It features a cantilever low-wing, a two-seats-in-side-by-side configuration enclosed cockpit under a bubble canopy, fixed tricycle landing gear, a T-tail and a single engine in tractor configuration. It is an approved SLSA in the USA. [2] [3] [4] [5]
The aircraft fuselage is made with a carbon fibre shell and composite sandwich bulkheads. The 9.6 m (31.5 ft) span wing is made from carbon fibre sandwiches built upon a laminated wooden spar. The wing varies from the Zephyr in that it has a different tapered planform and uses a new airfoil. The design attempts to provide a lower empty weight and stall speed than the 122 Zephyr. The standard engine available is the 100 hp (75 kW) Rotax 912ULS four-stroke powerplant. [2] [3] [4]
The Nordic Omsider amphibian prototype uses the wings and part of the tail from the Faeta. [4]
Data from Bayerl and Tacke [2] [4]
General characteristics
Performance
The Aeropilot Legend 540 is a Czech ultralight aircraft, designed and produced by Aeropilot, introduced at the Aero show held in Friedrichshafen in 2011. The aircraft is supplied complete and ready-to-fly-aircraft.
The Aerospool WT9 Dynamic is a Slovak ultralight and light-sport aircraft, designed and produced by Aerospool of Prievidza. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Alisport Yuma is an Italian ultralight aircraft, produced by Alisport of Cremella. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Alpi Pioneer 200 is an Italian ultralight and light-sport aircraft, designed and produced by Alpi Aviation, of Pordenone. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Alpi Pioneer 300 is an Italian ultralight and light-sport aircraft, designed produced by Alpi Aviation, of Pordenone. The aircraft is supplied as a kit for amateur construction.
The ATEC 212 Solo is a Czech ultralight aircraft, designed and produced by ATEC v.o.s. of Libice nad Cidlinou. The aircraft is supplied as a complete ready-to-fly-aircraft.
The ATEC 122 Zephyr 2000 is a Czech ultralight aircraft, designed by Oldrich Olansky and produced by ATEC v.o.s. of Libice nad Cidlinou. The aircraft is supplied as a complete ready-to-fly-aircraft or as a kit for amateur construction.
The Blackshape Prime is an Italian ultralight aircraft, produced by Blackshape srl, the company founded in Monopoli by Luciano Belviso and Angelo Petrosillo. The aircraft first flew in 2007 and was introduced at the Aero show held in Friedrichshafen in 2009. It is supplied as a complete ready-to-fly-aircraft.
The Colyaer Freedom S100 is a Spanish amphibious ultralight and light-sport aircraft, designed and produced by Colyaer of Portonovo.
The Fly Synthesis Syncro is an Italian ultralight and light-sport aircraft, designed and produced by Fly Synthesis, introduced at the Aero show held in Friedrichshafen in 2009. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Fly Synthesis Texan is an Italian ultralight and light-sport aircraft, designed and produced by Fly Synthesis and which has been in production since 1999. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Flyitalia MD3 Rider is an Italian ultralight and light-sport aircraft that was designed by Jaro Drostal in the Czech Republic and produced by Flyitalia of Dovera, Italy. The aircraft was supplied by Flyitalia complete and ready-to-fly.
The FMP Qualt 201 is a Czech ultralight and light-sport aircraft, designed and produced by FMP s.r.o. of Prague. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Houde Bimax is a French ultralight aircraft, designed and produced by Patrice Houde, introduced at the Blois homebuilt aircraft fly-in in September 2010. The aircraft is supplied as a complete ready-to-fly-aircraft.
The MSL Aero H80 is a French ultralight aircraft that was designed by Massimo Tedesco and Sebastian Lefebre and produced by MSL Aero of Limoges-Fourches.
The Pro.Mecc Freccia Anemo is an Italian ultralight aircraft, designed and produced by Pro.Mecc of Corigliano d'Otranto. The aircraft was introduced at the AERO Friedrichshafen show in 2011. The Freccia is supplied as a complete ready-to-fly-aircraft.
The Pro.Mecc Sparviero is an Italian ultralight aircraft, designed and produced by Pro.Mecc of Corigliano d'Otranto. The Sparviero is supplied as a kit for amateur construction or a complete ready-to-fly-aircraft.
The RMT Bateleur is a German ultralight and light-sport aircraft, designed by Andre von Schoenebeck and produced by RMT Aviation of Bad Bocklet. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The SAB C-100 Vulcan is an Italian ultralight and light-sport aircraft produced by SAB Aviation of Benevento. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Vervoost FV-3 Delphin is a German ultralight aircraft, designed and produced by Vervoost Leichtflugzeuge of Sinzig. It was first flown on 19 November 2009 and introduced at the AERO Friedrichshafen show in 2010. The aircraft is supplied as a complete ready-to-fly-aircraft.