| A-12 Bagoas | |
|---|---|
 | |
| Role | Experimental glider |
| National origin | France |
| Manufacturer | Georges Abrial |
| Designer | Georges Abrial |
| First flight | First week of July 1932. |
| Status | Abandoned project |
| Number built | 1 |
The A-12 was an unusual tailless glider designed by Georges Abrial in the early 1930s. It was not a success and was abandoned in 1932.
The Abrial A-12 was unusual in having a very low aspect ratio wing, [1] even by the standards of its time. Other tailless gliders of the 1920s, notably the Lippisch Storch series had aspect ratios of about 8, [2] compared with the 4.75 of the Abrial. [1] Further, where the Storchs had swept wings [2] the Abrial's was rectangular in plan. [3] After encouraging tests of models in the wind tunnel at St Cyr, Abrial built a full-sized version.
The Abrial's wings had the designer's own reflexed camber aerofoil. Such aerofoils are useful for tailless aircraft, because the pitching moment about the aerodynamic centre of the wing can be zero. The wings were mounted with strong dihedral and braced from above by a V-strut on each side, their apexes meeting at a faired triangular central support structure. It had control surfaces on the wings which may have operated as elevons and trapezoidal rudders mounted on triangular fins at the wing tips. [1] [3]
The pilot's unenclosed seat was immediately in front of the central support structure, at the centre of the wing, with his feet on a rudder bar ahead of the leading edge. The Abrial landed on a skid, with little wheels under the wing tips. [1]
Abrial named the A-12 Bagoas, after the Persian Vizier and poisoner. Its first flights were made during the first week of July 1932. [1] It presented so many technical problems that he abandoned development later that year. [3]
Data from Les Ailes July 1932 [1]
General characteristics
Aircraft of comparable role, configuration, and era
A delta wing is a wing shaped in the form of a triangle. It is named for its similarity in shape to the Greek uppercase letter delta (Δ).
Alexander Martin Lippisch was a German aeronautical engineer, a pioneer of aerodynamics who made important contributions to the understanding of tailless aircraft, delta wings and the ground effect, and also worked in the U.S. Within the Opel-RAK program, he was the designer of the world's first rocket-powered glider.
The A-2 Vautour (Vulture) was a single-seat French glider that was designed by Georges Abrial. It performed well at the Vauville competition of 1925.
Pterodactyl was the name given to a series of experimental tailless aircraft designs developed by G. T. R. Hill in the 1920s and early 1930s. Named after the genus Pterodactylus, a well-known type of Pterosaur commonly known as the pterodactyl, all but the first were produced by Westland Aircraft Ltd after Hill joined them.
A tailless aircraft has no other horizontal aerodynamic surface besides its main wing. It may still have a fuselage, vertical tail fin and/or vertical rudder.
The Backstrom EPB-1 Flying Plank is an American mid-wing, single seat, tailless glider that was designed by Al Backstrom, with assistance from Phil Easley and Jack Powell in 1954 and made available as plans for amateur construction.
Weltensegler G.m.b.H. was a German aircraft company formed by Friedrich Wenk, who became its Technical Director.
The Schleicher Rhönadler, DFS Rhönadler or Jacobs Rhönadler is a high performance, single seat competition sailplane built in Germany in the 1930s. More than 65 were built.
The RFB X-113 Aerofoil Boat was an experimental ground effect vehicle intended to work over water. It was one of three such aircraft designed by Alexander Lippisch in the 1960s and early 1970s. The X-113 first flew in 1970; only one was built.
The Collins X-112 was an experimental two-seat ground-effect vehicle, designed by Alexander Lippisch in the United States in the early 1960s to test his thick reverse delta wing concept.
The Teichfuss Cicogna was an Italian tailless single-seat motor glider designed by Luigi Teichfuss and flown in 1936.
The RRG Fafnir, named after the legendary dragon, was a single seat German high performance glider designed by Alexander Lippisch. It won the Rhön competition in 1931 and made several outstanding flights as well as setting a fashion for gull wings.
The RRG Professor was a very early soaring glider and the first to use a variometer for finding thermals. It was designed by Alexander Lippisch in Germany, first flying in 1928. The Professor was widely built by both flying clubs and factories.
The RRG Urubu Obs, often known just as the RRG Obs, was a one-off, large, two or three seat glider designed for meteorological observations by Alexander Lippisch in Germany and first flown in 1932.
The RRG Falke of 1930 was a secondary training glider designed by Alexander Lippisch in Germany and intended to provide better performance than his earlier RRG Prüfling whilst being easier to fly because of its inherent stability. It was sold as plans for both club and commercial production and was built in Germany and abroad.
The 1926 German RRG Prüfling of 1926 was a secondary training glider designed for club use. Plans were sold and it was built in Germany and across the world.
The Grüne Post was a secondary trainer glider designed by Alexander Lippisch at the request of a German newspaper, the Grüne Post, who distributed plans. Many were built by amateur groups.
The RRG Storch V was the only member of Alexander Lippisch's Storch series of tailless aircraft to be powered. It flew successfully in the year 1929.
The Avia 41-P was a high performance French glider. Eric Nessler set many new national gliding records in one between 1934 and 1938.
The RRG Delta I was a German experimental tailless aircraft flown in the early 1930s first as a glider and then powered. It was one of the first delta wing aircraft.