Aces High Cuby

Last updated
Cuby
General information
Type Kit aircraft
National origin Canada
Manufacturer Aces High Light Aircraft
Designer
Al Jasmine
Statusno longer in production
Number builtMore than 200 Cuby IIs
History
Introduction date1988

The Aces High Cuby is a family of Canadian single engine, high wing, strut-braced, light sports planes with conventional landing gear that was marketed for homebuilding by Aces High Light Aircraft of London, Ontario. [1] [2] [3]

Contents

The aircraft design was available in two versions, the single-seat Cuby I and side-by-side two-seat Cuby II. Aces High went out of business in the 1990s and the kits are no longer available.

Development

The Cuby fuselage is constructed from welded 4130 steel tubing, covered with aircraft fabric. The wings are built around an aluminum spar and D-cell and also fabric-covered. The conventional landing gear includes bungee-suspended main wheels and a steerable tail wheel. [1]

The controls are conventional three-axis, with no flaps fitted to the wing. The aircraft were available as kits or as completed aircraft and were designed to look and fly similarly to a Piper J-3 Cub. The kit price for the Cuby I was US$11,350, including the propeller and 28 hp (21 kW) Rotax 277 engine. [1]

The Cuby II features a 38 in (97 cm) wide cabin and a large baggage compartment behind the side-by-side seats. The aircraft was certified and put into production in Hungary for sale in Europe. In North America the Cuby II was sold for US$15,662.76, complete with propeller, 50 hp (37 kW) Rotax 503 powerplant, paint and fabric in 1988. Available options included folding wings, floats and an agricultural spray kit. [2] [3]

Reviewer Ken Armstrong, flying the Cuby II prototype with the 42 hp (31 kW) single carburetor version of the Rotax 503 said:

Takeoff was accomplished in 300 feet at an indicated airspeed of 30 mph. The climb-out was steep enough to leave the spectators' mouths agape.

I'm pleased to mention that the delightfully balanced rudder was smooth and linear in response—the best I've felt in an ultralight or homebuilt. Controls were moderately light, and the Cuby had very quick response.

Having no flaps or other drag-producing devices, we resorted to the time-proven sideslip to steepen our approaches, up to 1200 fpm. Touch and goes in the Cuby were so much fun that several abbreviated pattern circuits ensued, with a half dozen landings accomplished in ten minutes. [2]

Variants

Cuby I
Single seat, standard engine 28 hp (21 kW) Rotax 277, qualified as a US FAR 103 Ultralight Vehicle with an empty weight of 250 lb (113 kg) and as Canadian basic ultra-light, advanced ultra-light or amateur-built aircraft [1] [3] [4]
Cuby II
Two seat, standard engine 50 hp (37 kW) Rotax 503, qualified as a US amateur-built and Canadian basic ultra-light, advanced ultra-light or amateur-built aircraft. More than 200 completed and flying. [3] [4]

Specifications (Cuby II)

General characteristics

Performance

See also

Aircraft of comparable role, configuration, and era

Related lists

Related Research Articles

<span class="mw-page-title-main">ISON Airbike</span> Type of aircraft

The ISON Airbike and Tandem Airbike are a family of American high-wing, tractor configuration ultralight aircraft, that were available in kit form. The single-seat Airbike was introduced in 1994 and the two-seat Tandem Airbike was unveiled in 1996.

<span class="mw-page-title-main">Spectrum Beaver</span> Canadian ultralight aircraft

The Spectrum Beaver is a family of single- and two-place, pusher configuration, high-wing ultralight aircraft that were designed by Larry Croome and first introduced by Spectrum Aircraft of Surrey, British Columbia, Canada, in 1983.

The Fisher Super Koala is a two-seat, high wing, conventional landing gear, single-engined, light kit aircraft designed for construction by amateur builders. The aircraft was inspired by the design of the Piper J-3 Cub and strongly resembles that design.

<span class="mw-page-title-main">Fisher FP-404</span> Canadian homebuilt light aircraft

The Fisher FP-404 is a Canadian single-seat, conventional landing gear, single-engined biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

The Fisher FP-505 Skeeter is a Canadian single-seat, conventional landing gear, single-engined parasol-wing monoplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

The Freebird II is a family of American side-by-side two-seat, high wing, tricycle gear, pusher configuration single engined kit aircraft originally designed for construction by amateur builders by the Freebird Airplane Company of Marshville, North Carolina, and later Pro Sport Aviation of Wingate, North Carolina.

<span class="mw-page-title-main">InterPlane Skyboy</span> Type of aircraft

The InterPlane Skyboy is a two-seat, side-by-side, high wing, single engine, pusher configuration ultralight aircraft that was manufactured as a completed aircraft by InterPlane Aircraft of Zbraslavice, Czech Republic.

<span class="mw-page-title-main">CGS Hawk</span> Type of aircraft

The CGS Hawk is a family of high wing, strut-braced, pusher configuration, single and two-seats-in-tandem ultralight aircraft, designed by Chuck Slusarczyk and manufactured by CGS Aviation.

The Hy-Tek Hurricane 103 is a family of single-engined, high wing tricycle gear-equipped aircraft that were available in kit form from Hy-Tek Hurricane of Aurora, Oregon.

The Capella Javelin is a family of American open cockpit, high wing, tractor configuration, conventional landing gear-equipped ultralight aircraft that were produced in kit form by Capella Aircraft of Austin, Texas and intended for amateur construction.

<span class="mw-page-title-main">Kolb Firestar</span> Type of aircraft

The Kolb Firestar is a family of American open cockpit, high wing, pusher configuration, conventional landing gear-equipped ultralight aircraft that was produced in kit form by Kolb Aircraft of Phoenixville, Pennsylvania and intended for amateur construction.

The Kolb Slingshot is an American tandem two seat, high wing, strut-braced, pusher configuration, conventional landing gear-equipped ultralight aircraft, that was produced in kit form by New Kolb Aircraft of London, Kentucky and intended for amateur construction.

The Light Miniature Aircraft LM-1, LM-2 and LM-3 are a family of American high wing, conventional landing gear, strut-braced, single engine ultralight aircraft that are scale reproductions of famous general aviation aircraft. The designs were all available as plans from Light Miniature Aircraft of Okeechobee, Florida for amateur construction.

The Circa Reproductions Nieuports are a family of Canadian 7/8 scale World War I sesquiplane aircraft replicas designed by Graham Lee of Lamont, Alberta for amateur construction from plans sold by Lee's company Circa Reproductions. Leading Edge Air Foils of Peyton, Colorado at one time also made construction kits available. Lee's Nieuports were among the earliest First World War replicas available and paved the way for later companies to produce plans and kits for a great variety of warbirds.

<span class="mw-page-title-main">Rans S-12 Airaile</span> Type of aircraft

The Rans S-12 Airaile is a family of related American single-engined, pusher configuration, high-wing monoplanes designed by Randy Schlitter and manufactured by Rans Inc. The aircraft are available in kit form for amateur construction.

The RagWing RW7 Duster is a single seat, low wing, strut-braced, single engine ultralight aircraft designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction.

<span class="mw-page-title-main">Flying K Sky Raider</span> Family of ultralight aircraft

The Flying K Sky Raider is a family of American, high wing, strut-braced, single engine, conventional landing gear ultralight aircraft that was designed by Ken Schrader and produced by Flying K Enterprises and later Sky Raider LLC of Caldwell, Idaho for amateur construction.

<span class="mw-page-title-main">Carlson Sparrow</span> Type of aircraft

The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.

<span class="mw-page-title-main">Titan Tornado</span> American kit aircraft

The Titan Tornado is large family of cantilever high-wing, pusher configuration, tricycle gear-equipped kit aircraft manufactured by Titan Aircraft of Austinburg, Ohio, for amateur construction.

<span class="mw-page-title-main">Early Bird Jenny</span> American homebuilt aircraft

The Early Bird Jenny is an American homebuilt aircraft that was designed by Dennis Wiley and produced by the Early Bird Aircraft Company of Erie, Colorado, also by Leading Edge Airfoils of Peyton, Colorado. When it was available the aircraft was supplied as a kit and also in the form of plans for amateur construction.

References

  1. 1 2 3 4 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page B-13. Cybair Limited Publishing, 2001. ISBN   0-9680628-1-4
  2. 1 2 3 Armstrong, Kenneth: Choosing Your Homebuilt – the one you will finish and fly! Second Edition, pages 163–165. Butterfield Press, 1993. ISBN   0-932579-26-4
  3. 1 2 3 4 Purdy, Don: AeroCrafter – Homebuilt Aircraft Sourcebook, page 89. BAI Communications. ISBN   0-9636409-4-1
  4. 1 2 Transport Canada (September 2009). "Listing of Models Eligible to be Registered as Advanced Ultra-Light Aeroplanes (AULA)". Archived from the original on 2009-04-29. Retrieved 2009-10-01.