Aero Adventure Aventura

Last updated
Aventura
Aero Adventure Inc Aventura II photo 2.jpg
Aero Adventure Aventura II
Role Ultralight aircraft
National origin United States
Manufacturer Aero Adventure
DesignerBob Bailey
First flight1995
Introduction1995
Developed from Advanced Aeromarine Buccaneer
An Aventura II at Sun 'n Fun 2004 Aero Adventure Inc Aventura II photo 1.jpg
An Aventura II at Sun 'n Fun 2004

The Aero Adventure Aventura is a family of ultralight amphibians marketed as a kit aircraft by Aero Adventure of DeLand, Florida. [1] The aircraft was designed by Bob Bailey in 1995. [2] [3] [4]

Contents

The aircraft are high-wing flying boats of pusher configuration available in both single and two-seat models. Its design heritage stretches back to the Advanced Aeromarine Buccaneer amphibian ultralights. [2] [3]

Design

Introduced in 1995, the single-seat Aventura has repositionable main landing gear, down for runways and up for landing on water. The steerable tail wheel is retractable in concert with the repositioning of the main gear. There is no water rudder. The wing is an aluminium frame covered with pre-sewn Dacron envelopes. The hull is constructed from fibreglass and the wingtip floats are polyethylene. The remainder of the structure is anodized aluminium tubing, bolted together. Controls are conventional three-axis, with full span ailerons and no flaps. The company claims that the fast-build kit can be constructed in 90 hours. [3]

The two-seat Aventura II was introduced in 1996 and is similar to the single seater, but with a wider cabin and hull for two occupants in side-by-side configuration. The two-seater also features flaps to reduce landing speeds. The company claims 130 hours to build the two-seater from the kit. [3]

Variants

Aventura UL
Single seater optimised for the US FAR 103 Ultralight Vehicle category, with an empty weight of 328 lb (149 kg). Engines include the original 28 hp (21 kW) Rotax 277 in early models and the 40 hp (30 kW) Rotax 447 currently. 90 had been completed and flown by the end of 2011. [2] [3] [4] [5]
Aventura HP
Single seater intended to be registered as an amateur-built aircraft. Standard engines are the 50 hp (37 kW) Rotax 503 64 hp (48 kW) Rotax 582. 42 had been completed and flown by the end of 2011. [2] [3] [4] [5]
Aventura Sport
Two-seater marketed as the simplest and lightest model in the line-up. Standard engine is the 64 hp (48 kW) Rotax 582. 215 had been completed and flown by the end of 2011. [4] [6]
Aventura II
Two-seater with some options included as standard features. Standard engine is the 100 hp (75 kW) four-stroke Rotax 912ULS. [4] [5] [6] [7]
Aventura XLR
Limited edition two-seater with many extras as standard features, including a new style engine cowling, custom graphics package, redesigned instrument panel including GPS, vertical speed indicator and a mode-C transponder, electric landing gear retraction, gear indicator lights, differential hydraulic brakes, carpeting and a headliner. The standard engine is the 100 hp (75 kW) four-stroke Rotax 912ULS. [4] [6]
Aventura AVZ
Model with top-of-the-line equipment as standard. [7]

Specifications (Aventura HP)

Data from KitPlanes [2] [5]

General characteristics

Performance

See also

Related development

Related Research Articles

Advanced Aeromarine Buccaneer American amphibious flying boat

The Buccaneer is a one- or two-seat ultralight high-wing amphibious flying boat of pusher configuration marketed as a kit aircraft.

The Advanced Aviation Explorer is a two-seat ultralight marketed in kit form, for amateur construction. It is a high-wing taildragger aircraft of pusher configuration with tandem seating.

Rans S-6 Coyote II American light aircraft

The Rans S-6 Coyote II is an American single-engined, tractor configuration, two-seat, high-wing monoplane designed by Randy Schlitter and manufactured by Rans Inc. The Coyote is available in kit form for amateur construction or as a completed light-sport aircraft.

Fisher FP-404 Canadian homebuilt light aircraft

The Fisher FP-404 is a Canadian single-seat, conventional landing gear, single-engined biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

The Fisher FP-505 Skeeter is a Canadian single-seat, conventional landing gear, single-engined parasol-wing monoplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

Fisher Classic Canadian homebuilt light aircraft

The Fisher Classic is a Canadian two-seat, conventional landing gear, single-engined, biplane kit aircraft designed for construction by amateur builders. The aircraft is a two-seat derivation of the Fisher FP-404. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

The Freebird I is an American single-seat, high wing, tricycle gear, single engined pusher configuration ultralight kit aircraft designed for construction by amateur builders by the Freebird Airplane Company of Marshville, North Carolina and later also produced by Pro Sport Aviation of Wingate, North Carolina.

The Freebird II is a family of American side-by-side two-seat, high wing, tricycle gear, pusher configuration single engined kit aircraft originally designed for construction by amateur builders by the Freebird Airplane Company of Marshville, North Carolina and later Pro Sport Aviation of Wingate, North Carolina.

Kolb Mark III Type of aircraft

The Kolb Mark III is a family of American side-by-side two seater, high wing, strut-braced, pusher configuration, conventional landing gear-equipped ultralight aircraft that is produced in kit form by New Kolb Aircraft of London, Kentucky, and intended for amateur construction.

Ultravia Pelican Type of aircraft

The Ultravia Pelican is the name given to two series of high-wing, single-engine, tractor configuration ultralight aircraft that were designed by Jean Rene Lepage and produced in kit form for amateur construction by Ultravia Aero International of Mascouche, Quebec and later Gatineau, Quebec.

Rans S-12 Airaile Type of aircraft

The Rans S-12 Airaile is a family of related American single-engined, pusher configuration, high-wing monoplanes designed by Randy Schlitter and manufactured by Rans Inc. The aircraft are available in kit form for amateur construction.

The Flying K Sky Raider is a family of American, high wing, strut-braced, single engine, conventional landing gear ultralight aircraft that was designed by Ken Schrader and produced by Flying K Enterprises and later Sky Raider LLC of Caldwell, Idaho for amateur construction.

Carlson Sparrow Type of aircraft

The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.

Golden Circle Air T-Bird Type of aircraft

The Golden Circle Air T-Bird is a family of high-wing, strut-braced, pusher configuration ultralight aircraft that was produced by Teratorn Aircraft of Clear Lake, Iowa from 1983 to 1989 and then Golden Circle Air of De Soto, Iowa from 1989 until the mid-2000s. In 2011 the aircraft were back in production by Indy Aircraft. The aircraft is produced as a kit for amateur construction.

Earthstar Thunder Gull Type of aircraft

The Earthstar Thunder Gull is a family of cantilever high-wing, tricycle gear ultralight aircraft, manufactured by Earthstar Aircraft of Santa Margarita, California as a kit for amateur construction or as a completed aircraft.

Titan Tornado Type of aircraft

The Titan Tornado is large family of cantilever high-wing, pusher configuration, tricycle gear-equipped kit aircraft manufactured by Titan Aircraft of Austinburg, Ohio for amateur construction.

SlipStream Genesis Type of aircraft

The SlipStream Genesis is a family of American, strut-braced, high wing, pusher configuration, tricycle gear aircraft, produced in kit form, for amateur construction. Designed by Chuck Hamilton, the series were originally produced by Innovation Engineering of Davenport, Iowa and more recently by SlipStream International of Wautoma, Wisconsin.

The Arnet Pereyra Sabre II is an American, two-seats in side-by-side configuration, conventional landing gear-equipped, strut-braced, high-wing ultralight trainer that was produced by Arnet Pereyra Inc of Rockledge, Florida in kit form for amateur construction.

Antares MA-32 Type of aircraft

The Antares MA-32 is the first model in a large family of Ukrainian ultralight trikes that is designed and produced by Antares Aircraft and at one time marketed by Leading Edge Air Foils as the LEAF Antares. The aircraft are supplied as kits for amateur construction.

The Harmening High Flyer is an American powered parachute that was designed and produced by Harmening's High Flyers of Genoa, Illinois.

References

  1. "Company website". website. Retrieved 2019-07-09.
  2. 1 2 3 4 5 Downey, Julia: 2008 Kit Aircraft Directory, Kitplanes, Volume 24, Number 12, December 2007, page 37. Belvoir Publications. ISSN 0891-1851
  3. 1 2 3 4 5 6 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, pages B-6 & B-69. Cybair Limited Publishing, 2001. ISBN   0-9680628-1-4
  4. 1 2 3 4 5 6 Bayerl, Robby; Martin Berkemeier; et al: World Directory of Leisure Aviation 2011-12, page 90. WDLA UK, Lancaster UK, 2011. ISSN 1368-485X
  5. 1 2 3 4 Vandermeullen, Richard: 2011 Kit Aircraft Buyer's Guide, Kitplanes, Volume 28, Number 12, December 2011, page 37. Belvoir Publications. ISSN 0891-1851
  6. 1 2 3 Aero Adventure (n.d.). "Aventura II". Archived from the original on 2008-07-23. Retrieved 2009-07-28.
  7. 1 2 Tacke, Willi; Marino Boric; et al: World Directory of Light Aviation 2015-16, pages 92. Flying Pages Europe SARL, 2015. ISSN   1368-485X

Official website