Advanced Aeromarine Buccaneer

Buccaneer
	Buccaneer II
Role	Ultralight flying boat
Manufacturer	HighCraft AeroMarine ; Advanced Aeromarine ; Keuthan Aircraft ; Arnet Pereyra Inc
First flight	1984
Introduction	1984 (Buccaneer XA)
Retired	1998
Status	no longer in production
Variants	Arnet Pereyra Sabre II

Last updated April 14, 2023

The Buccaneer (also known in some of its many incarnations as the Mallard) is a one- or two-seat ultralight high-wing amphibious flying boat of pusher configuration marketed as a kit aircraft.

Development

The original single-seat model Buccaneer XA was introduced in 1984 and qualified for the US FAR 103 Ultralight Vehicle category. The aircraft was commercial success and sold well until being replaced by the Buccaneer SX in 1988. The SX remained available on the market until general production ended in 1998, although in 2001 the model was still available as a special order from Aero Adventure Aviation. The SX was replaced by the improved derivative Aero Adventure Aventura UL and HP single seaters.^[1]

The Buccaneer II was a two-seat side-by-side configuration model introduced in 1988 and intended as an ultralight trainer. This model was replaced by the Aero Adventure Aventura II, which is an improved model developed from the Buccaneer II.^[1]

Design

The original XA model is constructed from bolted together anodized aluminum tubing, with a fiberglass hull. The wire-braced wing is supported by a king post and is of aluminum structure, covered with pre-sewn Dacron covers. The wing features 2/3 span ailerons and no flaps. The tail wheel is retractable via a cable control, while the main landing gear is removed by the pilot in flight and stowed in the cockpit for landing on water after a land take-off.^[1]

The model SX was introduced to provide incremental design improvements over the XA. Primarily the SX eliminated the cable-bracing and replaced it with V-struts featuring jury struts. The wings feature full-span ailerons. The fuselage was completely redesigned and features a new hull shape that can better handle higher wave conditions. The landing gear can be pivoted up for water landings, rather than removed.^[1]

The Buccaneer II is similar to the SX, but with a wider hull to accommodate two seats, in side-by-side configuration. The ailerons are 2/3 span. The landing gear is repositioned by a lever control and moves the tailwheel in concert with the main wheels. The main gear includes mechanical brakes.^[1]

Operational use

The original model XA remains popular on the used aircraft market and aircraft for sale command high prices. Long operational use and the rigours of land and water operation have resulted in weak points in the design being identified as many older aircraft have suffered from bent wing trailing edges, wing root tube brackets, flying wire shackles and tail boom tubes. Cracked aft vertical stabilizer tubes and main bulkheads are also common. All of these deficiencies can be repaired in used aircraft.^[1]

Variants

Buccaneer XA: Single seat, wired-braced Part 103 ultralight flying boat. Engines available were the 28 hp (21 kW) Rotax 277 and the 35 hp (26 kW) Rotax 377.^[1]
Buccaneer SX: Single seat, strut-braced flying boat. Engines available were the 40 hp (30 kW) Rotax 447 and the 50 hp (37 kW) Rotax 503.^[1]
Buccaneer II: Two seat, strut-braced flying boat. Engines available were the 64 hp (48 kW) Rotax 582 and the 80 hp (60 kW) Rotax 912.^[1]
Mallard M2-A: Extensively modified Buccaneer, with the wing lowered. Was sold as a modification package and as a complete kit.^[3]

Specifications (Buccaneer XA)

General characteristics

Wingspan: 33 ft 6 in (10.21 m)
Wing area: 162 sq ft (15.1 m²)
Empty weight: 325 lb (147 kg)
Gross weight: 1,235 lb (560 kg)
Powerplant: 1 × Rotax 277 2-stroke air-cooled piston engine, 27 hp (20 kW)

Performance

Maximum speed: 75 mph (121 km/h, 65 kn)

Related Research Articles

Aero Adventure LLC is an American aircraft manufacturer based in DeLand, Florida.

The Aero Adventure Aventura is a family of ultralight amphibians marketed as a kit aircraft by Aero Adventure of DeLand, Florida. The aircraft was designed by Bob Bailey in 1995.

<span class="mw-page-title-main">Eipper Quicksilver</span> American ultralight aircraft

Quicksilver is a line of single and two-place high wing, single-engine, ultralight aircraft that evolved from weight-shift hang gliders including Bob Lovejoy's High Tailer.

The Progressive Aerodyne SeaRey is an American two-seat, single-engine, amphibious flying boat designed and manufactured by Progressive Aerodyne originally in Orlando, Florida, and now in Tavares, Florida. It was first flown in November 1992 and is sold as a kit aircraft for amateur construction as well as a light-sport aircraft.

The Rotax 503 is a 37 kW (50 hp), inline 2-cylinder, two-stroke aircraft engine, built by BRP-Rotax GmbH & Co. KG of Austria for use in ultralight aircraft.

The Rotax 447 is a 41.6 hp (31 kW), inline 2-cylinder, two-stroke aircraft engine, built by BRP-Rotax GmbH & Co. KG of Austria for use in ultralight aircraft.

The ISON Airbike and Tandem Airbike are a family of American high-wing, tractor configuration ultralight aircraft, that were available in kit form. The single-seat Airbike was introduced in 1994 and the two-seat Tandem Airbike was unveiled in 1996.

The Airdrome Dream Classic is a minimalist, high wing, single seat, single engine ultralight aircraft inspired by the 1908 Santos-Dumont Demoiselle and produced in kit form by Airdrome Aeroplanes of Holden, Missouri.

The Flightstar is a large family of single and two-seat, high wing, single engined kit aircraft that was produced by Flightstar Sportplanes of South Woodstock, Connecticut. In 2009 the rights, tooling and parts inventory were sold to Yuneec International of China when Flightstar Sportplanes' business was wound up.

The Fisher FP-404 is a Canadian single-seat, conventional landing gear, single-engined biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

The CGS Hawk is a family of high wing, strut-braced, pusher configuration, single and two-seats-in-tandem ultralight aircraft, designed by Chuck Slusarczyk and manufactured by CGS Aviation.

<span class="mw-page-title-main">Murphy Renegade</span> Type of aircraft

The Murphy Renegade is a family of Canadian two-seats-in-tandem, single engine, conventional landing gear, biplanes, produced by Murphy Aircraft and intended for amateur construction.

The Ultravia Pelican is the name given to two series of high-wing, single-engine, tractor configuration ultralight aircraft that were designed by Jean Rene Lepage and produced in kit form for amateur construction by Ultravia Aero International of Mascouche, Quebec and later Gatineau, Quebec.

<span class="mw-page-title-main">Phantom X1</span> Type of aircraft

The Phantom X1 is a single-engined, tractor configuration, single seat, cable-braced high wing tricycle gear-equipped ultralight aircraft that is produced by Phantom Aeronautics of Three Rivers, Michigan and available in kit form.

The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.

The Joplin Tundra is a family of Canadian, high-wing, strut-braced, pusher configuration ultralight aircraft that was originally produced by Back Forty Developments of Campbellford, Ontario, Canada and later by Joplin Light Aircraft of Joplin, Missouri and Laron Aviation of Borger, Texas for amateur construction. The aircraft is out of production.

The Arnet Pereyra Sabre II is an American, two-seats in side-by-side configuration, conventional landing gear-equipped, strut-braced, high-wing ultralight trainer that was produced by Arnet Pereyra Inc of Rockledge, Florida in kit form for amateur construction.

The Microleve Corsario is a Brazilian amphibious ultralight flying boat that was designed and produced by Microleve of Rio de Janeiro. The aircraft was supplied as a kit for amateur construction.

The Apollo Monsoon is a Hungarian ultralight trike, designed and produced by Apollo Ultralight Aircraft of Eger. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.

The Ramphos Trident is an Italian amphibious ultralight trike, designed and produced by Ramphos of Fontanafredda. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.

References

1 2 3 4 5 6 7 8 9 10 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, pages E-7-8. Cybair Limited Publishing, 2001. ISBN 0-9680628-1-4
↑ Downey, Julia: 1999 Kit Aircraft Directory, Kitplanes, Volume 15, Number 12, December 1998, page 37. Primedia Publications. ISSN 0891-1851
↑ Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, page 92. BAI Communications, 15 July 1998. ISBN 0-9636409-4-1

External links

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[Cliche-1] 1 2 3 4 5 6 7 8 9 10 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, pages E-7-8. Cybair Limited Publishing, 2001. ISBN 0-9680628-1-4

[KitplanesDec1998-2] Downey, Julia: 1999 Kit Aircraft Directory, Kitplanes, Volume 15, Number 12, December 1998, page 37. Primedia Publications. ISSN 0891-1851

[Aerocrafter-3] Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, page 92. BAI Communications, 15 July 1998. ISBN 0-9636409-4-1

[1]

[2]

[3]