Aerocar Mini Imp | |
---|---|
General information | |
Type | Homebuilt aircraft |
National origin | United States |
Manufacturer | Aerocar International |
Designer | |
Status | Plans available (2015) |
History | |
Developed from | Aerocar IMP |
The Aerocar Mini-IMP (Independently Made Plane) is a light aircraft designed by Moulton Taylor and marketed for homebuilding by Aerocar International. It is a scaled-down derivative of his original Aerocar IMP design. A two-seat version called the Bullet was also built. The Mini-IMP follows the same unconventional layout as its larger predecessor, with a center mounted engine, long driveshaft to a tail propeller, and inverted-V rudder/elevators. [1]
The aircraft is available in the form of plans for amateur construction. Following Taylor's death, the plans and licensing for the Mini-IMP have been marketed by the Mini-IMP Aircraft Company of Weatherford, Texas. [2] [3] [4]
The aircraft features a cantilever high-wing, a single-seat enclosed cockpit, fixed or retractable tricycle landing gear or conventional landing gear and a single engine in pusher configuration. [2] [3]
The aircraft is made from riveted aluminum sheet. Its 24.5 ft (7.5 m) span wing is mounted well behind the pilot and employs a NASA GA(PC)-1 airfoil. The engine is mounted behind the pilot's seat driving the propeller through an extension shaft. Engines used include the 60 to 100 hp (45 to 75 kW) Volkswagen air-cooled engine four-stroke. [2] [3] [5]
Taylor claimed the Mini-IMP was not an original design, but an updated version of the 1912 Edson Fessenden Gallaudet Bullet, a design that was capable of 110 mph in the earliest days of flight. [6]
In the late 1970s inquiries were made concerning a military version of the Mini-IMP, skinned with Kevlar, armed with two 7.62-millimeter machine guns, and with room in the baggage compartment for a considerable quantity of ammunition. Nothing came of the proposal. [7]
Data from Bayerl and Tacke [2] [3]
General characteristics
Performance
Related development:
The Brügger MB-1, MB-2 and MB-3 Colibri is a family of small sports aircraft designed in Switzerland in the 1960s and 1970s for amateur construction.
The Alpi Pioneer 200 is an Italian ultralight and light-sport aircraft, designed and produced by Alpi Aviation, of Pordenone. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The ATEC 321 Faeta is a Czech ultralight and light-sport aircraft, designed and produced by ATEC v.o.s. of Libice nad Cidlinou. It was developed from the earlier ATEC 122 Zephyr 2000. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Aurore MB 02-2 Mini Bulle is a French ultralight aircraft, designed by Michel Barry and produced by Aurore Sarl of Sauvagnon. The aircraft is supplied as a kit or as plans for amateur construction.
The Aurore MB 04 Souris Bulle is a French ultralight aircraft, designed by Michel Barry and produced by Aurore Sarl of Sauvagnon. The aircraft is supplied as a kit or as plans for amateur construction.
The AV Leichtflugzeuge Vagabund is a German ultralight aircraft that was designed by Birk Meier, Hans Grannemann and Robert Kaps and produced by AV Leichtflugzeuge of Haren, Germany. The aircraft is supplied as a kit or plans for amateur construction or as a complete ready-to-fly-aircraft.
The Ehroflug Coach II S is a Swiss ultralight aircraft, designed by Egon Scheibe and produced by Ehroflug of Altnau. It was introduced in 1989. The aircraft is supplied as plans, as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Ekolot KR-030 Topaz is a Polish ultralight aircraft, designed and produced by Ekolot of Krosno. It was certified in Poland in February 2010. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly aircraft.
The Microleve Corsario is a Brazilian amphibious ultralight flying boat that was designed and produced by Microleve of Rio de Janeiro. The aircraft was supplied as a kit for amateur construction.
The Normand Dube Aerocruiser Plus is a four-seat Canadian amateur-built aircraft, designed by Normand Dube and produced by Aviation Normand Dube of Sainte-Anne-des-Plaines, Quebec. The aircraft is a development of the two-seat Norman Dube Aerocruiser.
The Circa Reproductions Morane Saulnier N, also called the Bullet, is a Canadian amateur-built aircraft that was designed by Graham Lee and produced by Circa Reproductions, of Surrey, British Columbia. The aircraft is supplied as plans for amateur construction.
The Lucas L7, also called the L 7 and L-7, is a French amateur-built aircraft that was designed by Emile Lucas of Lagny-le-Sec. The aircraft is supplied in the form of plans for amateur construction.
The Flitzer Z-21 or Staaken Flitzer is a British amateur-built aircraft, designed by Lynn Williams and produced by Flitzer Sportplanes of Aberdare, Wales. The aircraft is supplied as plans for amateur construction.
The JPM 01 Médoc is a French amateur-built aircraft that was designed by Jean-Pierre Marie in 1987 and produced by Avions Jean-Pierre Marie (JPM) of Le Mesnil-Esnard. The aircraft is supplied as plans for amateur construction.
The Peña Bilouis is a French aerobatic amateur-built aircraft that was designed by the competitive aerobatic pilot Louis Peña of Dax, Landes and made available in the form of plans for amateur construction.
The Peña Capeña is a French aerobatic amateur-built aircraft that was designed by competitive aerobatic pilot Louis Peña of Dax, Landes and made available in the form of plans for amateur construction.
The Peña Joker and Super Joker are a family of French amateur-built aircraft that were designed by Louis Peña of Dax, Landes and are made available in the form of plans for amateur construction.
The Platzer Kiebitz is a German amateur-built aircraft designed by Michael Platzer and made available in the form of plans for amateur construction.
The Stolp SA-500 Starlet is an American amateur-built aircraft. The aircraft is supplied in the form of plans for amateur construction by Aircraft Spruce & Specialty of Corona, California.
The Taiwan Dancer TD-3 is a Taiwanese amateur-built aircraft produced by Taiwan Dancer Technology Co. of Nangang Village, Dayuan District, Taoyuan City. Designed by Chin Lien Wei, the aircraft is supplied as a kit for amateur construction.