| Airelle | |
|---|---|
 | |
| Role | Kit-built ultralight |
| National origin | France |
| Manufacturer | Aeronix sarl, La Chapelle-Vendômoise |
| First flight | February 2002 |
| Status | Out of production |
| Number built | 5 |
The Aeronix Airelle is a tandem wing ultralight with twin engines in push-pull configuration, that was designed and built in France at the start of the millennium. It was intended to be homebuilt from kits, and a few prototypes were constructed, but development ended when the company went into receivership in 2006.
Design of the Airelle began in 1999, and a one third scale model flew the following October. The full scale Airelle was formally introduced with a mock-up at the Paris air show held at le Bourget in June 2003, although its first flight was made in February 2002. [1]
Its layout is very unusual, both in that it has a tandem pair of wings, and that its twin engines are in push-pull configuration. The rear wing has the greater span and chord, and is swept (at 30°) and tapered, with outward-leaning fins and rudders at its tips, rather as in traditional lifting canard aircraft. However, the unswept, straight tapered foreplane has a much greater fore/rear wing span ratio (about 80%) than most of this type, for example 66% for the World War II Miles Libellula. The whole trailing edge of each rear wing, which has a dihedral of 2°, is occupied by a combination of outboard mass balanced ailerons and inboard plain flaps. The foreplane has full span elevators and slightly turned down tips. The wings, like the rest of the Airelle's structure, is largely carbon fibre. The fins have inward turned tips. The Airelle's rudders have several modes of operation: used together they control yaw, as normal; they can be split on one side only, as spoilers, or both faces can separate to act as airbrakes. [1]
The Airelle's fuselage is short, with the centrally hinged, forward opening, transparent cabin doors between the wings and engines. Both two and four seat variants were planned. A glass cockpit and a control system without rudder bars is fitted. The fuselage is deeper aft, carrying the rear wing higher than the foreplane. The prototype Airelles were powered by 30 kW (40 hp) Zanzottera flat twin engines, though Hirth F23ES engines of the same power and configuration were planned for production aircraft, and a projected VLA version was intended to take engines of up 75 kW (100 hp). [1] [2] The Airelle has a tricycle undercarriage with sprung, composite main legs mounted on the fuselage. [1]
After the Paris Air Show of 2003, Aeronix concentrated on promoting and delivering kits of the ultralight version, with deliveries starting that year. [1] By June 2003, seven had been sold. [3] By 2005, at least five had been built [1] and the third prototype, with the French experimental registration F-WATC flew at that year's Paris show. [4] By that time the, first two Airelles were in storage at the Aeronix factory, the second prototype having been damaged in an engine fire during testing. [5] The fifth Airelle was prepared for a Pole-to-Pole publicity flight, equipped with non-standard instrumentation. Gary Purdom, the company test pilot, was to fly the aircraft, [1] but before it could be done Aeronix went into receivership in February 2006.
Data from Jane's All the World's Aircraft 2006-7: performance estimated [1]
General characteristics
Performance
The MAI-223 Kityonok is a single-engine STOL ultralight aircraft developed by the Moscow Aviation Institute's special design bureau (OSKBEC) from 2002. The first production aircraft was delivered in 2008. A crop spraying version is under development. The aircraft is supplied as a kit for amateur construction or complete and ready-to-fly.
The Canaero Toucan is a Canadian high-wing, two seats in tandem, twin engine push-pull configuration, twin-boom ultralight kit aircraft that was produced from 1983 to the late 1980s by Canaero Dynamics Aircraft of Rexdale, Ontario.
The Wings of Freedom Flitplane is an American single-seat, high-wing, single-engine ultralight aircraft that is available as a kit aircraft or as plans for amateur construction from Wings of Freedom of Hubbard, Ohio.
The Birdman Atlas is a single-seat, high wing, single engine in pusher configuration, ultralight aircraft that was based upon the Eipper Quicksilver design.
The Kolb Kolbra and King Kolbra are a family of American tandem two seater, high wing, strut-braced, pusher configuration, conventional landing gear-equipped ultralight aircraft that are produced in kit form by New Kolb Aircraft of London, Kentucky and intended for amateur construction.
The Alpaero Exel is a French single seat, single engine pusher pod-and-boom kit-built ultralight motor glider. About 10 had been produced by 2005.
The RemSchetMash RSM-15 Robust is a single-seat, single-engine ultralight built in Ukraine. It first flew in 2006 but no production aircraft had been produced by late 2009.
The RagWing RW9 Motor Bipe is a family of single seat, open-frame fuselage, open-cockpit, single engine ultralight aircraft designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction.
The Dedalus Poppy is a homebuilt, single engine, single seat ultralight aircraft flown in Italy in the 1980s. Several were built and flown; at least one remains on the Italian civil register in 2010.
The Iannotta I-66L San Francesco is a 1960s Italian ultralight designed to be homebuilt from plans. It has been powered by several flat-four engines in the 65-100 hp range and built in both single and two-seat tandem configurations. Only small numbers have been completed.
The Belite Superlite, originally the product of Belite Aircraft, is a single-seat, high-wing, single-engine ultralight aircraft developed from the Kitfox Lite aircraft especially for the United States FAR 103 Ultralight Vehicles category.
The Striplin FLAC is an American flying wing ultralight aircraft that was designed by Ken Striplin in 1977, first flying in October 1978. The aircraft was supplied as a kit for amateur construction.
The TL Ultralight TL-3000 Sirius is a conventional single engine high wing ultralight and Light-sport aircraft seating two side-by-side. It was designed and is produced in the Czech Republic.
The TL Ultralight TL-32 Typhoon is a wing and boom, high wing ultralight with its engine mounted above and ahead of the wing, seating two in side-by-side configuration. It was designed and built in the Czech Republic in the 1990s.
The Latécoère 225 was an unusual single seat canard microlight amphibian, with a swept wing, and of pusher configuration. It first flew in 1984 but was not put into production.
The Diehl AeroNautical XTC Hydrolight is an American amphibious flying boat ultralight aircraft that was designed and produced by Diehl AeroNautical in the 1980s. The prototype first flew in March 1982, with production of kits commencing the following year.
The Tisserand Hydroplum is a small amphibious aircraft with a single, pusher engine, built in France in the 1980s. Originally a single-seat, high-wing monoplane, it was developed into a two-seat biplane for production in kit form as the SMAN Pétrel.
The Aviakit Véga is an ultralight aircraft seating two in side-by-side configuration. It was designed in France in the late 1990s to be easily constructed by amateurs from kits and was offered with a choice of three engines and of tricycle or conventional undercarriages.
The ViS Sprint is a pusher configuration, pod-and-boom two-seat ultralight, designed and built in the Ukraine in the mid-2000s. It can serve as an agricultural spraying aircraft.
The Payen Arbalète was a small, pusher configuration, experimental French tailless aircraft, designed by Nicolas Roland Payen, and first flown in 1965.