| B1 Charlotte | |
|---|---|
 | |
| Charlotte at the Rhön competition in 1922 | |
| Role | Sailplane |
| National origin | Germany |
| Manufacturer | Akaflieg Berlin |
| First flight | 1922 |
| Number built | 1 |
The Akaflieg Berlin B1 Charlotte (named after the university at Charlottenburg), was a glider built in Germany in the 1920s. It featured a high-wing, tailless sailplane configuration of all-wood construction, which had a pair of skids for landing. [1]
Hermann Winter and Edmund Pfister shared the design work for the "Charlotte", hoping to compete at the 2nd Rhön competition at the Wasserkuppe. Progress was slow as Pfister had a full-time job to fulfill. Professor Winter was determined to compete at the next Rhön meeting, so he engaged the Sablatnig Works for completion of the glider, which went on to win at the Wasserkuppe in August 1922. [2]
Data from 75 Jahre 10 NI AKAFLIEG BERLIN 1920 - 1995 [2]
General characteristics
Performance
The Akaflieg Stuttgart fs18a was a glider designed and built in Germany from 1938. It was characterized by a gull wing and was the first glider to have a retractable undercarriage. Only one example of the design was constructed.
The Akaflieg München Mü2 Münchner Kindl is a glider that was designed and built in Germany in 1926.
The Akaflieg München Mü3 Kakadu is a glider designed and built in Germany in 1928.
Akaflieg Darmstadt is one of approximately twenty aviation groups attached to German universities. Akaflieg is an abbreviation for Akademische Fliegergruppe, an academic group of students and faculty from a German University.
The Hannover H.1 Vampyr was a German glider designed by Georg Madelung for the 1921 Rhön gliding competition, which was held at the Wasserkuppe from 8 August to 25 August 1921. The Vampyr is believed to be the first heavier than air aircraft to use stressed skin. Several historical societies have argued that the aircraft is the precursor of all modern sailplanes.
The Akaflieg Darmstadt D-6 Geheimrat, often shortened to Darmstadt D-6 Geheimrat, was an early competition glider with a single seat and high cantilever wing, designed and built by German University students in 1922.
The Akaflieg Darmstadt D-7 Margarete, often shortened to Darmstadt D-7 Margarete, was one of the earliest two seat monoplane gliders, designed and built by German university students in 1923.
The Schleicher Rhönadler, DFS Rhönadler or Jacobs Rhönadler is a high performance, single seat competition sailplane built in Germany in the 1930s. More than 65 were built.
The RRG Fafnir, named after the legendary dragon, was a single seat German high performance glider designed by Alexander Lippisch. It won the Rhön competition in 1931 and made several outstanding flights as well as setting a fashion for gull wings.
Lore and a copy, Musterle, were high performance sailplanes designed at Darmstadt by Paul Laubenthal. Lore was flown successfully by the well known glider pilot Wolf Hirth at the 1929 Rhön (Wasserkuppe) glider competition. Musterle was used by Hirth used to demonstrate the possibilities of "blue sky" thermalling for the first time.
The Der Dessauer, later Der alte Dessauer, was a German single-seat glider built in the early 1920s. It took part in all the Rhön gliding contests on the Wasserkuppe between 1923 and 1928, flew in the Alps, and made a long-duration flight along the German sea shore.
The F.V.D. Stehaufchen or Der Dresdener Stehaufchen, later relabelled the Akaflieg Dresden D-B1 Stehaufchen, was an unequal span biplane glider designed and built in Germany in 1921. It flew with some success at the second and third Rhön competitions on the Wasserkuppe and was also used to train pilots.
The F.V.D. Doris or Dresden Doris, later known as the Akaflieg Dresden D-B2 Doris, was a monoplane glider built in Germany in 1922. It was unusual in having wings which could independently adjust their angles of attack, a feature intended to increase the energy acquired from gusts of wind.
The Akaflieg Hannover H.2 Greif was a 1922 development of the successful Vampyr glider. Though it flew in three successive Rhön (Wasserkuppe) contests, it failed to match the achievements of its predecessor.
The Akaflieg Berlin B2 Teufelchen was a glider built in Germany in the 1920s. It featured a high-wing, cantilever sailplane configuration of all-wood construction.
The Akaflieg Berlin B3 Charlotte II was a glider built in Germany in the 1920s. It featured a high-wing, tailless sailplane configuration of all-wood construction, which had a single skid for landing and applied brakes.
The Akaflieg Berlin B4 F.F. was a single-seat aircraft built in Germany in the early 1930s. It was a high-wing monoplane of all-wood construction with fabric-covered foldable wings
The Akaflieg Berlin B5 was a glider built in Germany in the late 1930s. It featured a high-wing, cantilever sailplane configuration of all-wood construction, with cantilevered gull-wings, retractable landing-gear, all-moving-tail, dive air-brakes.
The Akaflieg Berlin B6 was a glider built in Germany in the late 1930s. It featured a high-wing, cantilevered mid-wing sailplane configuration with Junkers-flaps, retractable landing gear, all moving tail, dive air brakes, wood and steel body.
The Akaflieg Berlin B8 was a German sailplane built in the late 1930s for the 1939 Olympic games glider competition in Rome. It was a high-wing sailplane with a cantilever shoulder-wing, dive air-brakes and all wood construction.
 | Wikimedia Commons has media related to Akaflieg Berlin B1 Charlotte . |