Alecto-class sloop

Last updated

Class overview
NameAlecto-class sloop
Builders
OperatorsNaval Ensign of the United Kingdom.svg  Royal Navy
Preceded byStromboli class
Succeeded byDriver class
Built1838–1842
In commission1840–1865
Completed4
Lost1
Retired3
General characteristics
Type
Displacement1,283 tons
Tons burthen800+5894 bm
Length
  • 164 ft 0 in (50.0 m) gundeck
  • 142 ft 6 in (43.4 m) keel for tonnage
Beam
  • 32 ft 8 in (10.0 m) maximum
  • 32 ft 2 in (9.8 m) for tonnage
Depth of hold18 ft 7 in (5.7 m)
Installed power200 nominal horsepower
Propulsion
  • 2-cylinder VSE direct acting steam engine
  • Paddles
Armament
  • 2 x 32 pdr (42 cwt) MLSB guns on pivot mounts
  • 2 x 32 pdr (25 cwt) MLSB guns on broadside trucks

The Alecto-class steam vessels (SV3) later reclassed as Third Class Sloops, were designed by Sir William Symonds, the Surveyor of the Navy. The design was approved on 12 April 1839. [1] Initially four vessels were ordered and completed. A fifth unit was ordered (Rattler), but was reordered as a screw propelled vessel. And a sixth unit had been ordered but was requested to be reordered to a different design. The screw driven Rattler participated in the first of three 'tug o- wars with the Alecto. The vessels all participated during the Russian War. All had gone to the breakers by the mid-1860s.

Contents

Alecto was the second named vessel since it was used for a 12-gun fireship, launched by King of Dover on 26 May 1781 and sold in 1802. [2]

Ardent was the fifth named vessel since it was used for a 64-gun third rate, launched at Blaydes of Hull on 13 August 1764, captured by the French off Plymouth on 17 August 1779, recaptured in April 1782 and renamed Tiger then sold in June 1794. [3]

Prometheus was the second named vessel since it was used for an 18-gun fireship, Launched by Thompson of Southampton on 27 March 1807, assigned to harbour service in May 1819, then renamed Veteran on 2 May 1839 and broken in August 1852. [4]

Polyphemus was the second named vessel since it was used for a 64-gun third rate, launched at Sheerness Dockyard on 27 April 1782, converted to a powder hulk in September 1813 and her breaking was completed at Chatham on 15 September 1827. [5]

Design and specifications

The vessels were ordered in February 1839. The first two were laid down in July 1839 at Chatham and Sheerness Dockyards. The second pair were laid down at Chatham Dockyard in February 1840. The first two vessels (Alecto and Prometheus) were launched in July 1839 with Polyphemus launched in September 1840 and Ardent in February 1841. [6] The gundeck was 164 feet 0 inches (49.99 metres) with the keel length of 142 feet 6 inches (43.43 metres) reported for tonnage. [7] The maximum beam was 32 feet 8 inches (9.96 metres) with 32 feet 6 inches (9.91 metres) reported for tonnage. [8] The depth of hold was 18 feet 7 inches (5.66 metres). The builder's measure calculated at 800+5894 tons whereas the vessels displaced 878 tons. [9]

Seaward and Capel of Millwall supplied the machinery for all vessels. They were equipped with two fire-tube rectangular boilers. The engines were 2-cylinder vertical single expansion (VSE) direct acting steam engines rated at 200 nominal horsepower (NHP).

All four ships were armed with two 32-pounder 42 hundredweight (cwt) [Note 1] [10] muzzle loading smooth bore ( MLSB) guns on pivot mounts and two 32-pounder (25 cwt) MLSB carronades on broadside trucks. [11]

Initial cost of vessels

Alecto-class sloops
NameBuilderLaunchedRemarks
Alecto Chatham Dockyard7 September 1839Broken November 1865
Prometheus Sheerness Dockyard21 September 1839Broken 5 March 1863
Polyphemus Chatham Dockyard28 September 1840Wrecked 29 January 1856
Ardent Chatham Dockyard12 February 1841Broken 2 March 1865

Notes

  1. "cwt", or "hundredweight" refers to the weight of the gun itself. "32-pounder" refers to the weight of the ball fired
  2. A total cost accounting for inflation of approximately £2,552,800 in today's money for Alecto.
  3. A total cost accounting for inflation of approximately £2,863,600 in today's money for Ardent.
  4. A total cost accounting for inflation of approximately £2,619,300 in today's money for Prometheus.
  5. A total cost accounting for inflation of approximately £2,863,600 in today's money for Polyphemus.

Citations

  1. Winfield
  2. Colledge, Alecto
  3. Colledge, Ardent
  4. Colledge, Prometheus
  5. Colledge, Polyphemus
  6. Lyon Winfield, page 159-160
  7. Lyon Winfield, pages 159-160
  8. Winfield
  9. Winfield
  10. Lyon Winfield, pages 159-160
  11. Lyon Winfield, pages 159-160

Related Research Articles

HMS <i>Rattler</i> (1843) Sloop of the Royal Navy

HMS Rattler was a 9-gun steam screw sloop of the Royal Navy, and one of the first British warships to be completed with screw propulsion. She was originally ordered as a paddle wheel 4-gun steam vessel from Sheerness Dockyard on 12 March 1841. She was reordered on 24 February 1842 as a propeller type 9-gun sloop from HM Royal Dockyard, Sheerness, as a new vessel. William Symonds had redesigned the ship as a screw propeller driven vessel.

HMS <i>Expedition</i> (1679) Ship of the line of the Royal Navy

HMS Expedition was a 70-gun third-rate ship of the line built at Portsmouth Dockyard in 1677/79. She was in active commission during the War of the English Succession participating in the battles of Beachy Head and Barfleur. She was rebuilt in 1699. Again, for the War of Spanish Succession she was in commission for the operation at Cadiz then returned to England where she sat for two years. She was in the Mediterranean for the Battle of Marbella in 1705. She then went to the West Indies and fought in Wager's action off Cartagena in 1708. She was rebuilt in 1709-14 to the 1706 Establishment. She spent her time split between the Baltic and as guard ship at Portsmouth before being broken at Portsmouth in 1736. She was rebuilt in 1736/40 at Deptford Dockyard.

HMS <i>Niger</i> (1846) Sloop of the Royal Navy

HMS Niger was originally slated to be built as a Sampson designed sloop; however, she was ordered as a First-Class sloop with screw propulsion on 20 February 1845 to be built at Woolwich Dockyard, along the design developed by Oliver Lang and with a hull like the Basilisk designed paddle sloops. Her armament and engine were to be like the Encounter Design building at Pembroke. A second vessel (Florentia) was ordered on 26 March 1846 but after her keel was laid at Pembroke Dockyard, her construction was suspended on 6 October 1846 then cancelled three years later, on 22 May 1849. Niger She conducted important propulsion trials, finally proving the superiority of screw propulsion and served in West Africa, the Crimea, China, the East Indies and Australia. She took part in the New Zealand wars in 1860 and was sold for breaking in 1869.

HMS <i>Salamander</i> (1832) Sloop of the Royal Navy

HMS Salamander was one of the initial steam powered vessels built for the Royal Navy. On 10 January 1831 the First Sea Lord gave orders that four paddle vessels be built to competitive designs. The vessels were to be powered by Maudslay, Son & Field steam engines, carry a schooner rig and mount one or two 10-inch shell guns. Initially classed simply as a steam vessel (SV), she was re-classed as a second-class steam sloop when that categorization was introduced on 31 May 1844. Designed by Joseph Seaton, the Master Shipwright of Sheerness, she was initially slated to be built in Portsmouth, and was changed to Sheerness Dockyard. She was launched and completed in 1832, took part in the Second Anglo-Burmese War and was broken up in 1883.

<i>Conflict</i>-class sloop

This group of vessels were originally slated to be built to the Sampson designed steam vessel; however, the Admiralty on 9 May 1845, ordered the first pair as First-Class screw sloops to be built from a design of Sir William Symonds, Surveyor of the Navy. This design would become known as the Conflict-class sloop. These would be 10-gun vessels with 400 NHP engines. The second pair of vessels were ordered on 26 March 1846 but after their keels were laid at Pembroke Dockyard, their construction was suspended in September 1846 then cancelled five years later, on 4 April 1851. Both completed ships served in the Baltic during the Crimean war, and Desperate briefly served as a store ship to Edward Augustus Inglefield's Arctic expedition. They had both been broken up by 1865.

HMS <i>Reynard</i> (1848) Sloop of the Royal Navy

HMS Reynard was part of the 1847 Program, she was ordered on 25 April as a steam schooner from Deptford Dockyard with the name ‘Plumper’. However, the reference Ships of the Royal Navy, by J.J. College, © 2020, there is no entry that associates the name Plumper to this build. The vessel was reordered on 12 August as an 8-gun sloop as designed by John Edye. She was launched in 1848, conducted anti-piracy work in Chinese waters and was wrecked near Pratas Island in the South China Sea on 31 May 1851.

<i>Archer</i>-class sloop

On 26 March 1846, two vessels were ordered from Deptford Dockyard as Rifleman-designed gunvessels named Archer and Parthian. However, on 9 September 1846 the orders for both vessels were suspended prior to the vessels being laid down. On 25 April 1847 two vessels were ordered to the improved Rattler-type screw sloops as designed by John Edye of the Surveyor's Department from Deptford Dockyard. The first vessel, Archer may have been the change of the build from the Rifleman type to the sloop design. The second vessel, Wasp, appears to be a new vessel as the build for the Parthian remained on the books at Deptford until June 1849, when it was cancelled. Archer received the machinery from the gunvessel Rifleman, which resulted in an increase of speed over Wasp. Wasp's hull was sheathed in Muntz metal to retard marine growth. Their armament would increase from 12 to 15 guns over their careers. Both vessels would participate in the Russian War of 1854–1855. Both would be broken by 1869.

<i>Hermes</i>-class sloop

The Hermes class were a group of four vessels designed by John Edye of the Surveyor's Department to specifications outlined by Captain William Symonds, the Surveyor of the Navy. The design was approved in 1834. The vessels would be powered by a 140 nominal horsepower engine and carry an armament of two brass 9-pounder guns. The ships would be built in three Royal Dockyards, however, the Chatham vessel was transferred to Sheerness in 1837 prior to being laid down. Hermes was re-engined and lengthen in 1842, Megaera was wrecked in Jamaica in 1843. the remaining vessels served on many different stations of the Empire. Acheron was sold in 1855, Hermes went to the Breakers in 1864 and Volcano lasted until 1894.

<i>Merlin</i>-class packet boat

The Merlin-class packet boat of 1838 was a Sir William Symonds design that was approved on 2 April 1838. The vessels were to be built for steam mail packet service on the Liverpool to Dublin route. The initial two ships were ordered in the fall of 1838 from Pembroke Dockyard. The third vessel (Medina) was ordered in 1839, also from Pembroke. When completed all vessels were used on the Liverpool station. In 1848 all three were in the Mediterranean on mail packet service. Merlin went to the Baltic during the Russian Was as a survey ship. Medusa went to the Black Sea. Medina remained in the Mediterranean being converted to a survey ship for Mediterranean service. Merlin served on the West Coast of Africa and was sold for commercial use in 1863. Medina was sold at Malta in April 1864. Medusa was converted to a tugboat in 1861 and remained in that service until sold in 1872.

HMS <i>Dee</i> (1832) Sloop of the Royal Navy

HMS Dee was the first paddle steamer ordered for the Royal Navy, designed to carry a significant armament. She was ordered on 4 April 1827 from Woolwich Dockyard. She was designed by Sir Robert Seppings, Surveyor of the Navy and modified by Oliver Lang. This vessel was considered as new construction as a previous vessel ordered as a flush deck Cherokee-class brig in 1824, had been renamed African in May 1825. She was initially classed as a steam vessel (SV), and in 1837 reclassified as a steam vessel class 2 (SV2). She was converted to a troopship in May 1842 and as a second class sloop in 1846. She was converted into a storeship in 1868. She was broken at Sheerness in 1871.

HMS <i>Hermes</i> (1835) Sloop of the Royal Navy

HMS Hermes was a Hermes-class wooden paddle sloop of the Royal Navy. She was built at Portsmouth Dockyard. Initially she was used as apackey vessel until her guns were upgraded. She was re-engined and lengthened in 1842 to 43. She spent time on various stations in the Empire. She participated in the storming of Rangoon during the Second Burmese War. She was sold for breaking in October 1864.

HMS Rhadamanthus was one of the initial steam powered vessels built for the Royal Navy. On 10 January 1831 the First Sea Lord gave orders that four paddle vessels be built to competitive designs. The vessels were to be powered by Maudslay, Son & Field steam engines, carry a schooner rig and mount one or two 10-inch shell guns. Initially classed simply as a steam vessel (SV), she was re-classed as a second-class steam sloop in 1846. Designed by Thomas Roberts, the Master Shipwright of Plymouth. She was launched and completed in 1832, She was converted into a transport in 1841 then in 1851 she was a troopship and by the 1860s she was a transport again. Her breaking was completed in February 1864.

HMS Medea was one of the initial steam-powered vessels built for the Royal Navy. On 10 January 1831 the new First Lord Sir James Graham, 2nd Baronet gave orders that four paddle vessels be built to competitive designs. The vessels were to be powered by Maudslay, Son & Field steam engines, carry a schooner rig and mount one or two 10-inch shell guns. Initially classed simply as a steam vessel (SV), she was re-classed as a second-class steam sloop when that categorization was introduced on 31 May 1844. Designed by Oliver Lang, the master shipwright of Woolwich. She was launched and completed in 1834, took part in the Syrian Coast Campaign and was broken up in 1867.

The Stromboli class was a group of two vessels designed by Sir William Symonds the Surveyor of the Navy. The design was approved on 29 August 1838. The vessels were of the Medea design but were altered to the new draught derived from the Gorgon. The ships were initially classified as Steam Vessels Second Class (SV2) and were later classified as First Class sloops. The ships were built in two Royal Dockyards. Both ships were at the bombardment of Acre in 1840. Both were in the Black and Azov seas during the Russian War. They served on various stations of the Empire. Vesuvius was sold in 1865 and Stromboli in 1866. Both were broken by White at East Cowes on the Isle of Wight.

HMS Alecto was an Alecto-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally classed as a steam vessel (SV3), her classification would be changed to a Third Class Sloop. She initially served in the Mediterranean, prior to her tug of war with the Rattler. She spent her time in the Americas and mainly on the anti-slavery patrol off the west coast of Africa. She was broken in November 1865

HMS Prometheus was an Alecto-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally classed as a steam vessel (SV3), her classification would be changed to a Third Class Sloop. She initially served mainly on the west coast of Africa on the anti-slavery patrol except for a brief period on particular service in the Black Sea in late 1855. She was sold on 5 March 1863 for breaking.

HMS Polyphemus was an Alecto-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally classed as a steam vessel (SV3), her classification would be changed to a Third Class Sloop. She initially served in the Mediterranean, west coast of Africa and the Baltic. She was wrecked on the Baltic side Jutland on 29 January 1856.

The Bulldog-class steam vessels (SV2) later reclassed as First Class Sloops, were designed by Sir William Symonds, the Surveyor of the Navy. Designed from the Driver class by Admiralty Order of 26 December 1843, the design was approved in 1844. The changes included lengthening the bow by 10 feet to provide 6 feet of extra space in the engine room. Three vessels would have a single funnel whereas Scourge would have two and be completed as a bomb vessel. In July 1844 it was queried if Fury was to be completed as a screw vessel, however, since her construction was well along she would be completed as a paddle steamer. Four vessels were ordered and completed.

HMS Sheerness was a fifth rate built under the 1689 programme built at Sheerness Dockyard. Her guns were listed under old terms for guns as demi-culverines, sakers and minions. After commissioning she spent her career in Home Waters, North America, Mediterranean and the West Indies. She was reduced to a 20-gun sixth rate in 1717 then rebuilt as a Modified 1719 Establishment sixth rate in 1731. She was sold in 1744.

HMS Lowestoffe was a 32-gun fifth rate built at Chatham Dockyard in 1696/97. She spent her career on counter piracy patrols and trade Protection duties. She participated in the capture of Port Royal in Nova Scotia. She was rebuilt in 1722/24 as a 20-gun sixth rate. She was sold in July 1744.

References