HMS Medea (1833)

Last updated

History
Naval Ensign of the United Kingdom.svg United Kingdom
NameHMS Medea
Ordered12 January 1831
Builder Woolwich Dockyard
Cost£35,961
Laid downApril 1831
Launched2 September 1833
Completed3 April 1834
Commissioned30 January 1834
Honours and
awards
Syrian Coast 1840
FateBroken up at Portsmouth in January 1867
General characteristics
Type Paddle sloop
Displacement1,142 tons
Tons burthen835 bm
Length
  • 179 ft 4.5 in (54.7 m) gundeck
  • 157 ft 4.875 in (48.0 m) keel for tonnage
Beam
  • 31 ft 11 in (9.7 m) maximum
  • 31 ft 7 in (9.6 m) for tonnage
Draught
  • 13 ft 10 in (4.2 m) (forward)
  • 14 ft 6 in (4.4 m) (aft)
Depth of hold20 ft (6.1 m)
Propulsion
  • 350 nominal horsepower
  • 2-cylinder VSE side lever steam engine
  • re-engined 1846
  • 4-cylinder Siamese steam engine
  • 900  ihp (670  kW)
  • Paddles
Sail plan Schooner rig, later changed to barquentine
Speed10.6 knots (19.6 km/h) (under steam)
Complement135
Armament
  • 2 × 10-inch (84 cwt) pivot guns
  • 2 (later 4) × 32-pounder (25 cwt) guns
  • 1862 1 x 110 pounder

HMS Medea was one of the initial steam-powered vessels built for the Royal Navy. On 10 January 1831 the new First Lord Sir James Graham, 2nd Baronet gave orders that four paddle vessels be built to competitive designs. The vessels were to be powered by Maudslay, Son & Field steam engines, carry a schooner rig and mount one or two 10-inch shell guns. [1] Initially classed simply as a steam vessel (SV), she was re-classed as a second-class steam sloop when that categorization was introduced on 31 May 1844. Designed by Oliver Lang, the master shipwright of Woolwich. She was launched and completed in 1834, took part in the Syrian Coast Campaign and was broken up in 1867.

Contents

Medea was the fifth named vessel (spelt Medea or Medee) since it was introduced for a 26-gun, sixth rate (Medee) captured from the French on 4 April 1744 by HMS Dreadnought, sold in March 1745 to become the privateer Boscawen. [2]

Design and specifications

Her keel was laid in April 1832 at Woolwich Dockyard and launched on 2 September 1833. [3] Her gundeck was 179 feet 4.5 inches (54.67 metres) with her keel length reported for tonnage calculation was 157 feet 4.875 inches (47.98 metres). Her maximum breadth was 31 feet 11 inches (9.73 metres) with 31 feet 7 inches (9.63 metres) being reported for tonnage. Her depth of hold was 20 feet 0 inches (6.10 metres). Her light draught was 13 feet 10 inches (4.22 metres) forward and 14 feet 6 inches (4.42 metres) aft. Her builder's measure tonnage was 835 tons though her displacement was 1,142 tons. [4]

Her machinery was supplied by John Penn & Sons of Greenwich. She was fitted with two fire-tube rectangular boilers. Her steam engine was a two-cylinder vertical single expansion (VSE) engine rated at 350 nominal horsepower (NHP). In 1846 she was re-engined with a Maudslay 4-cylinder Siamese engine of 220 NHP. During her steam trials the engine generated 900 indicated horsepower (670 kW) for a speed of 10.6 knots (19.6 km/h). [5] She originally was to have a schooner sail plan, however, this was changed to a barque or barquentine sail rig. [6]

Her armament initially consisted of two Miller's Original 10-inch 84 hundredweight (cwt) [Note 1] muzzle loading smooth bore (MLSB) shell guns on pivot mounts and two Bloomfield's 32-pounder [Note 2] 25 cwt MLSB guns on broadside trucks. [7] The number of 32-pounders was later increased to four guns. In 1862 one of the 10-inch guns was replaced by an Armstrong 7-inch rifled breach loading (RBL) gun on a pivot mount. [8] This Armstrong gun was more commonly known as the 100/110-pounder depending on the weight of shell carried. This gun was probably withdrawn in the late 1860s due to a weakness in the breach mechanism.

She was completed on 12 February 1833 with an initial cost of £35,961 (including machinery - £13,080). [9] [Note 3]

Commissioned service

First commission

Her first commission was on 30 January 1834 under the command of Commander Horatio Thomas Austin, RN for service in the Mediterranean. She returned to Home Waters paying off in October 1837. [10]

Second commission

Her next commissioning would occur on 14 February 1838 under the command of Commander John Neale Nott, RN for service on the North America and West Indies Station, including the St Lawrence River. She returned to Home Waters paying off in November 1839. [11]

Third commission

She commissioned on 12 August 1840 under Commander Frederick Warden, RN for service in the Mediterranean. She was involved with operations of the Syrian coast in late 1840 and the blockade of Alexandria. When ordered to return to Home Waters she proceeded to Greece to pick up the Xanthian Marbles. These were a group of marble artifacts discovered in Greece by Sir Charles Fellows at the city of Xanthus in 1838 and are now on display in the British Museum. [12] She paid off on 15 May 1845. [13]

Fourth commission

During her time in reserve her engine was changed. She was commissioned on 2 November 1846 under the command of Commander Francis Thomas Brown, RN. On 5 November 1846 Commander Graham E.W. Hammond assumed command. Commander Thomas Henry Mason, RN took command after the death of Commander Hamond on 23 January 1847 for service on the East Indies and China Station. Commander William Nicholar Lockyer, RN took temporary command on 20 February 1849 with his assumption of command confirmed on 7 December 1849. On 8 September she was in action with five pirate junks. Ordered to Home Waters she arrived on 1 July 1850 carrying the Koh-i-Noor diamond. She paid off on 8 July at Portsmouth. Here she underwent a refit starting in 1851 and completing in 1852. [14]

Fifth commission

Her fifth commission started on 18 December 1852 under the command of Commander John Crawshay Bailey, RN for service on the North America and West Indies Station. She returned to Home Waters in November 1853. On 16 November 1853 Commander Augustus Phillimore, RN took command for service in Home Waters. She went aground off Spurn Point on 30 December 1853. After being refloated she went to Woolwich for repairs in January 1854. After being repaired she went to the North America and West Indies Station in May 1854. On 10 October 1855 Commander Edward Peirse, RN took command. She returned to Home Waters paying off into the Portsmouth Steam Reserve on 17 June 1856. She underwent a repair and refit at Portsmouth in 1860. [15]

Sixth commission

Her last commission commenced on 18 September 1861 under the command of Commander D'Arcy Spense Preston, RN for service on the North America and West Indies Station. She returned to Home Waters paying off for the last time at Portsmouth on 22 June 1865. [16]

Disposition

She was surveyed then condemned in December 1866. She was broken in January 1867. [17]

Notes

  1. "cwt", or "hundredweight" refers to the weight of the gun itself.
  2. "32-pounder" refers to the weight of the shot fired.
  3. A total cost accounting for inflation of approximately £4,124,600 in today's money.

Citations

  1. Winfield
  2. Colledge
  3. Winfield
  4. Lyon Winfield, page 155
  5. Lyon Winfield, page 155
  6. Winfield
  7. Winfield
  8. Lyon Winfield, page 155
  9. Winfield
  10. Winfield
  11. Winfield
  12. "HMS Medea".
  13. Winfield
  14. Winfield
  15. Winfield
  16. Winfield
  17. Winfield

Related Research Articles

HMS <i>Plumper</i> (1848) Sloop of the Royal Navy

HMS Plumper was part of the 1847 programme, she was ordered on 25 April as a steam schooner from Woolwich Dockyard with the name Pincher. However, the reference Ships of the Royal Navy, by J.J. College, (c) 2020 there is no entry that associates this name to this build. The vessel was reordered on 12 August as an 8-gun sloop as designed by John Fincham, Master Shipwright at Portsmouth. Launched in 1848, she served three commissions, firstly on the West Indies and North American Station, then on the West Africa Station and finally in the Pacific Station. It was during her last commission as a survey ship that she left her most enduring legacy; in charting the west coast of British Columbia she left her name and those of her ship's company scattered across the charts of the region. She paid off for the last time in 1861 and was finally sold for breaking up in 1865.

HMS <i>Rattler</i> (1843) Sloop of the Royal Navy

HMS Rattler was a 9-gun steam screw sloop of the Royal Navy, and one of the first British warships to be completed with screw propulsion. She was originally ordered as a paddle wheel 4-gun steam vessel from Sheerness Dockyard on 12 March 1841. She was reordered on 24 February 1842 as a propeller type 9-gun sloop from HM Royal Dockyard, Sheerness, as a new vessel. William Symonds had redesigned the ship as a screw propeller driven vessel.

HMS Phoenix was built as a fireship as part of the 1693–94 programme of Fireships. After her commissioning she spent time in the English Channel then joined the Fleet for the Battle of Vigo Bay followed by the Battle of Velez-Malaga. She went aground in the Isles of Scilly and was salvaged. While laid up at Plymouth in 1708 was rebuilt as a 24-gun sixth rate. After recommissioning she spent her time in Home Waters, North America and the West Indies. She was rebuilt again in 1727 before finally being sold in 1744.

HMS <i>Niger</i> (1846) Sloop of the Royal Navy

HMS Niger was originally slated to be built as a Sampson designed sloop; however, she was ordered as a First-Class sloop with screw propulsion on 20 February 1845 to be built at Woolwich Dockyard, along the design developed by Oliver Lang and with a hull like the Basilisk designed paddle sloops. Her armament and engine were to be like the Encounter Design building at Pembroke. A second vessel (Florentia) was ordered on 26 March 1846 but after her keel was laid at Pembroke Dockyard, her construction was suspended on 6 October 1846 then cancelled three years later, on 22 May 1849. Niger She conducted important propulsion trials, finally proving the superiority of screw propulsion and served in West Africa, the Crimea, China, the East Indies and Australia. She took part in the New Zealand wars in 1860 and was sold for breaking in 1869.

HMS <i>Brisk</i> (1851)

HMS Brisk was a 14-gun wooden-hulled screw sloop designed by the Committee of Reference as part of the 1847 program. She is considered an enlarged Rattler with the design approved in 1847. She was ordered on 25 April 1847 from Woolwich Dockyard as a 10-gun sloop, but the guns were later increased due to the Russian War, to 14 guns by increasing the number of 32-pounder guns. She was launched on 2 June 1851 from Woolwich Dockyard. She served in the Russian War of 1854- 55 and as part of the Southern African anti-slavery patrol, with a final commission on the Australian Station. She was sold in 1870 for use in an pioneer, but unsuccessful, telegraph service.

HMS <i>Salamander</i> (1832) Sloop of the Royal Navy

HMS Salamander was one of the initial steam powered vessels built for the Royal Navy. On 10 January 1831 the First Sea Lord gave orders that four paddle vessels be built to competitive designs. The vessels were to be powered by Maudslay, Son & Field steam engines, carry a schooner rig and mount one or two 10-inch shell guns. Initially classed simply as a steam vessel (SV), she was re-classed as a second-class steam sloop when that categorization was introduced on 31 May 1844. Designed by Joseph Seaton, the Master Shipwright of Sheerness, she was initially slated to be built in Portsmouth, and was changed to Sheerness Dockyard. She was launched and completed in 1832, took part in the Second Anglo-Burmese War and was broken up in 1883.

HMS <i>Malacca</i> (1853) Sloop of the Royal Navy

HMS Malacca was a 17-gun wooden sloop of the Royal Navy. She was ordered on 9 November 1847 from Moulmein, Burma to be built of teak. As a Surveyor's Department design, Malacca was based on the Conflict designed sloop which was approved on 9 December 1848. After launching in April 1853 she was commissioned the following month to be sailed to England for the fitting of her engine. She entered British Naval service in 1854 and served three commissions including action in the Russian War 1854 - 55 before being sold in 1869. Her resale to Japan, she served in the Japanese Navy as a training ship until broken in 1906.

HMS <i>Encounter</i> (1846) Sloop of the Royal Navy

HMS Encounter was ordered as a First-Class Sloop with screw propulsion on 5 February 1845 to be built at Pembroke, in accordance with the design developed by John Fincham, Master Shipwright at Portsmouth. Her armament was to consist of 8 guns. She was to have a more powerful steam engine rated at 360 nominal horsepower. In 1848 she would be altered abaft and lengthened at Deptford prior to completion. A second vessel (Harrier) was ordered on 26 March 1846 but after her keel was laid at Pembroke Dockyard, her construction was suspended on 9 September 1846 then cancelled five years later, on 4 April 1851. Encounter had her armament radically altered in 1850 and she was broken up at Devonport in 1866.

HMS <i>Reynard</i> (1848) Sloop of the Royal Navy

HMS Reynard was part of the 1847 Program, she was ordered on 25 April as a steam schooner from Deptford Dockyard with the name ‘Plumper’. The vessel was reordered on 12 August as an 8-gun sloop as designed by John Edye. She was launched in 1848, conducted anti-piracy work in Chinese waters and was wrecked near Pratas Island in the South China Sea on 31 May 1851.

<i>Hermes</i>-class sloop

The Hermes class were a group of four vessels designed by John Edye of the Surveyor's Department to specifications outlined by Captain William Symonds, the Surveyor of the Navy. The design was approved in 1834. The vessels would be powered by a 140 nominal horsepower engine and carry an armament of two brass 9-pounder guns. The ships would be built in three Royal Dockyards, however, the Chatham vessel was transferred to Sheerness in 1837 prior to being laid down. Hermes was re-engined and lengthen in 1842, Megaera was wrecked in Jamaica in 1843. the remaining vessels served on many different stations of the Empire. Acheron was sold in 1855, Hermes went to the Breakers in 1864 and Volcano lasted until 1894.

HMS <i>Dee</i> (1832) Sloop of the Royal Navy

HMS Dee was the first paddle steamer ordered for the Royal Navy, designed to carry a significant armament. She was ordered on 4 April 1827 from Woolwich Dockyard. She was designed by Sir Robert Seppings, Surveyor of the Navy and modified by Oliver Lang. This vessel was considered as new construction as a previous vessel ordered as a flush deck Cherokee-class brig in 1824, had been renamed African in May 1825. She was initially classed as a steam vessel (SV), and in 1837 reclassified as a steam vessel class 2 (SV2). She was converted to a troopship in May 1842 and as a second class sloop in 1846. She was converted into a storeship in 1868. She was broken at Sheerness in 1871.

HMS <i>Hermes</i> (1835) Sloop of the Royal Navy

HMS Hermes was a Hermes-class wooden paddle sloop of the Royal Navy. She was built at Portsmouth Dockyard. Initially she was used as apackey vessel until her guns were upgraded. She was re-engined and lengthened in 1842 to 43. She spent time on various stations in the Empire. She participated in the storming of Rangoon during the Second Burmese War. She was sold for breaking in October 1864.

HMS Rhadamanthus was one of the initial steam powered vessels built for the Royal Navy. On 10 January 1831 the First Sea Lord gave orders that four paddle vessels be built to competitive designs. The vessels were to be powered by Maudslay, Son & Field steam engines, carry a schooner rig and mount one or two 10-inch shell guns. Initially classed simply as a steam vessel (SV), she was re-classed as a second-class steam sloop in 1846. Designed by Thomas Roberts, the Master Shipwright of Plymouth. She was launched and completed in 1832, She was converted into a transport in 1841 then in 1851 she was a troopship and by the 1860s she was a transport again. Her breaking was completed in February 1864.

The Stromboli class was a group of two vessels designed by Sir William Symonds the Surveyor of the Navy. The design was approved on 29 August 1838. The vessels were of the Medea design but were altered to the new draught derived from the Gorgon. The ships were initially classified as Steam Vessels Second Class (SV2) and were later classified as First Class sloops. The ships were built in two Royal Dockyards. Both ships were at the bombardment of Acre in 1840. Both were in the Black and Azov seas during the Russian War. They served on various stations of the Empire. Vesuvius was sold in 1865 and Stromboli in 1866. Both were broken by White at East Cowes on the Isle of Wight.

The Alecto-class steam vessels (SV3) later reclassed as Third Class Sloops, were designed by Sir William Symonds, the Surveyor of the Navy. The design was approved on 12 April 1839. Initially four vessels were ordered and completed. A fifth unit was ordered (Rattler), but was reordered as a screw propelled vessel. And a sixth unit had been ordered but was requested to be reordered to a different design. The screw driven Rattler participated in the first of three 'tug o- wars with the Alecto. The vessels all participated during the Russian War. All had gone to the breakers by the mid-1860s.

The Bulldog-class steam vessels (SV2) later reclassed as First Class Sloops, were designed by Sir William Symonds, the Surveyor of the Navy. Designed from the Driver class by Admiralty Order of 26 December 1843, the design was approved in 1844. The changes included lengthening the bow by 10 feet to provide 6 feet of extra space in the engine room. Three vessels would have a single funnel whereas Scourge would have two and be completed as a bomb vessel. In July 1844 it was queried if Fury was to be completed as a screw vessel, however, since her construction was well along she would be completed as a paddle steamer. Four vessels were ordered and completed.

HMS Seahorse was a member of the Gibraltar Group of 24-gun sixth rates. After commissioning she spent her career in Home waters and North America on trade protection duties. She was rebuilt at Deptford between 1725 and 1727. After her rebuild she served in Home Waters, North America, West Indies and the Mediterranean on trade protection. She was sold in 1749.

HMS Rose was a member of the Gibraltar Group of 24-gun sixth rates. After commissioning she spent her career in Home waters and North America on trade protection duties. She was rebuilt at Woolwich between 1722 and 1724. After her rebuild she served in Home Waters, North America, West Indies and the Mediterranean on trade protection. She was sold in 1744.

HMS Experiment was a fifth rate built under the 1689 programme built at Deptford Dockyard. Her guns were listed under old terms for guns as demi-culverines, sakers and minions. After commissioning she spent her career in Home Waters, North America, Mediterranean and the West Indies. She was reduced to a 20-gun sixth rate in 1717 then rebuilt as a 1719 Establishment sixth rate in 1724. Her breaking was finally completed at Portsmouth in 1738.

HMS Sheerness was a fifth rate built under the 1689 programme built at Sheerness Dockyard. Her guns were listed under old terms for guns as demi-culverines, sakers and minions. After commissioning she spent her career in Home Waters, North America, Mediterranean and the West Indies. She was reduced to a 20-gun sixth rate in 1717 then rebuilt as a Modified 1719 Establishment sixth rate in 1731. She was sold in 1744.

References