Allied Aviation XLRA

Last updated
LRA
Allied XLRA-1.jpg
XLRA-1
RoleTransport flying boat glider
Manufacturer Allied Aviation
First flight1943
Primary user U.S. Navy
Number built2

The Allied Aviation XLRA was a prototype flying-boat transport glider built for the US Navy during World War II. It was a low-wing wooden monoplane that could carry ten troops. Two prototypes were constructed, but orders for 100 production examples were cancelled when the Navy decided to opt for powered transport aircraft instead. The designation LR2A was assigned to a refined version of the design, but this was never produced.

Contents

Specifications (XLRA-1)

General characteristics

See also

Aircraft of comparable role, configuration, and era

Related lists

Related Research Articles

Douglas C-47 Skytrain Military transport aircraft derived from DC-3

The Douglas C-47 Skytrain or Dakota is a military transport aircraft developed from the civilian Douglas DC-3 airliner. It was used extensively by the Allies during World War II and remained in front-line service with various military operators for many years.

Messerschmitt Me 321 Gigant German cargo glider

The Messerschmitt Me 321 Gigant was a large German cargo glider developed and used during World War II. Intended to support large scale invasions, the Me 321 saw very limited use due to the low availability of suitable tug aircraft, high vulnerability whilst in flight and the difficult ground handling, both at base and at destination landing sites. The Me 321 was developed, in stages, into the six-engined Messerschmitt Me 323 Gigant, which removed some of the problems with ground handling, but vulnerability to ground fire and aerial attack remained a constant problem during operations of all variants.

General Aircraft Hotspur British military glider of the Second World War

The General Aircraft GAL.48 Hotspur was a military glider designed and built by the British company General Aircraft Ltd during World War II. When the British airborne establishment was formed in 1940 by order of Prime Minister Winston Churchill, it was decided that gliders would be used to transport airborne troops into battle. General Aircraft Ltd were given a contract by the Ministry of Aircraft Production in June 1940 to design and produce an initial glider for use by the airborne establishment, which resulted in the Hotspur.

Military glider Gliders used by the militaries of various countries

Military gliders have been used by the militaries of various countries for carrying troops and heavy equipment to a combat zone, mainly during the Second World War. These engineless aircraft were towed into the air and most of the way to their target by military transport planes, e.g., C-47 Skytrain or Dakota, or bombers relegated to secondary activities, e.g., Short Stirling. Most military gliders do not soar, although there were attempts to build military sailplanes as well, such as the DFS 228.

Gribovsky G-11

The Gribovsky G-11 was a Soviet light troop/cargo military glider of World War II.

The Kolesnikov-Tsibin KC-20 or KTs-20 was a Soviet light troop military glider of World War II.

Fouga CM.10

The Fouga CM.10 was an assault glider designed for the French Army shortly after World War II, capable of carrying 35 troops, later converted as a powered transport.

Chase YC-122 Avitruc

The Chase XCG-18A and YC-122 Avitruc was a military transport aircraft designed by Chase Aircraft and produced in limited numbers in the United States in the late 1940s, initially as a glider, but definitively in powered form. The design was based on the CG-14 cargo glider but was substantially larger and featured all-metal construction. It was a high-wing cantilever monoplane. The fuselage was of rectangular cross-section and featured a loading ramp at its rear. The main undercarriage units were carried at the sides of the fuselage and were fixed, while the nosewheel was retractable. In its powered form, two radial engines were fitted in nacelles in the wings.

Chase XCG-20 Transport glider, U.S. Air Force, 1950

The Chase XCG-20, also known as the XG-20 and by the company designation MS-8 Avitruc, was a large assault glider developed immediately after World War II by the Chase Aircraft Company for the United States Air Force, and was the largest glider ever built in the United States. The XG-20 did not see production due to a change in USAF requirements, however, it was modified into the successful Fairchild C-123 Provider twin-engined transport aircraft which saw extensive service in the Vietnam War.

Douglas XCG-17 Prototype for a sailing military aircraft, based on the Douglas DC-3

The Douglas XCG-17 was an American assault glider, developed by the conversion of a C-47 Skytrain twin-engine transport during World War II. Although the XCG-17 was successfully tested, the requirement for such a large glider had passed, and no further examples of the type were built; one additional C-47, however, was converted in the field to glider configuration briefly during 1946 for evaluation, but was quickly reconverted to powered configuration.

The Kokusai Ki-59 was an early 1940s light transport monoplane built by Nippon Kokusai Koku Kogyo K.K for the Imperial Japanese Army as a development of the Teradako-ken TK-3 which had first flown in 1938.

Piasecki HRP Rescuer

The Piasecki HRP Rescuer is a United States tandem-rotor transport or rescue helicopter designed by Frank Piasecki and built by Piasecki Helicopter. The Piasecki PV-3 was adopted as the HRP-1 Rescuer by the United States Navy, United States Marine Corps, and United States Coast Guard. An improved PV-17 variant was later produced as the HRP-2. As one of the first transport helicopters in military service, the HRP-1 was capable of carrying two crewmen and 8-10 passengers or 2,000 lb. (907 kg) of cargo.

Heinkel HD 25

The Heinkel HD 25 was a two-seat shipboard biplane reconnaissance floatplane developed in Germany during the 1920s for production in Japan.

Bristol XLRQ

The Bristol XLRQ-1 was a 12-seat amphibious glider of the Bristol Aeronautical Corporation, New Haven, Connecticut (USA), developed for the United States Marine Corps in 1942-43. Only two prototypes were built before the USMC scrapped the idea of glider use in 1943.

Pratt-Read TG-32

The Pratt-Read TG-32 was a 1940s American military training glider, designed and built by the Gould Aeronautical Division of the piano manufacturer Pratt, Read & Company of Deep River, Connecticut, for the United States Navy. The Pratt-Read glider was a monoplane glider having a fabric-covered steel tube fuselage and wooden wings and tail. The unique "polywog (tadpole)" shape was the suggestion of aerodynamicist Charles Townsend Ludington, former owner of the Ludington Line.

Taylorcraft LBT

The Taylorcraft LBT was a glider designed and built by Taylorcraft during World War II, in response to a United States Navy requirement for a glide bomb. One of three prototype "Glomb" models ordered by the Navy, the LBT suffered from technical and performance difficulties, and was cancelled early in production, none of the aircraft seeing operational service.

The Snead CG-11 was a proposed Second World War American transport glider to be built for the United States Army, none were built and the programme was cancelled.

The Snead LRH was a proposed amphibious transport glider design for the US Navy during World War II.

The AGA Aviation CG-9, company designation AGA Aviation G.5 was a proposed Second World War American transport glider to be built for the United States Army Air Force (USAAF), none were built and the programme was cancelled.

The AGA Aviation LRG was a proposed amphibious transport glider design for the US Navy during World War II.

References