Formerly | Weaver Aircraft Company |
---|---|
Industry | Aerospace |
Founded | 1920 |
Defunct | 1947 |
Headquarters | , United States |
The Waco Aircraft Company (WACO) was an aircraft manufacturer located in Troy, Ohio, United States. Between 1920 and 1947, the company produced a wide range of civilian biplanes.
The company initially started under the name Weaver Aircraft Company of Ohio but changed its name to the Waco Aircraft Company in 1928/29.
WACO (referring to the aircraft) is usually pronounced "wah-co" [1] (the first syllable pronounced as in "water"), not "way-co" like Waco, Texas, whose name is entirely unrelated.
Several companies operated under the Waco name, with the first company being the Weaver Aircraft Company, a firm founded by George E. Weaver, Clayton Bruckner, and Elwood Junkin in 1920 in Lorain and Medina, Ohio after they had already been collaborating for several years. In the spring of 1923 this became the Advance Aircraft Company in Troy, Ohio, after the departure of Weaver.
In 1929, it was changed from Advance Aircraft Company to Waco Aircraft Company. [2] The firm is often confused with Western Aviation Company, the name of four unrelated aircraft enterprises in Chicago, Illinois; San Antonio, Texas; and Burbank, California.
Waco's history started in 1919 when businessmen Clayton J. "Clayt" Brukner and Elwood "Sam" Junkin met barnstorming pilots Charles "Charley" William Meyers and George "Buck" Weaver. Although their initial floatplane design was a failure, they went on to found the Waco company in 1920 and established themselves as producers of reliable, rugged planes that were popular with travelling businessmen, postal services and explorers, especially after the company began producing closed-cabin biplane models after 1930 in addition to the open cockpit biplanes. [3]
The Waco name was extremely well represented in the U.S. civil aircraft registry between the wars, with more Wacos registered than the aircraft of any other company. Production types include open cockpit biplanes, cabin biplanes and cabin sesquiplanes (known by Waco as Custom Cabins) as well as numerous experimental types.[ citation needed ]
During World War II, Waco produced large numbers of military gliders for the RAF and US Army Air Forces for airborne operations, especially during the Normandy Invasion and Operation Market Garden. The Waco CG-4 was the most numerous of their glider designs to be produced. At the same time Waco produced over 600 of its UPF-7 open biplanes and 21 VKS-7F cabin biplanes for the Civilian Pilot Training Program, which supplemented the output of the military training establishments. 42 privately owned models of sixteen types were impressed into service as light transports and utility aircraft with the USAAF under the common designation C-72/UC-72.
Waco ceased operations in 1947, [4] having suffered the fate of a number of general aviation companies when an anticipated boom in aviation following World War II failed to develop. [5] The final Waco relied on an experimental Franklin engine which, with the cancellation of other contracts became so expensive, that the Aristocraft, which relied on it, was cancelled. [6]
The Waco brand name was briefly revived, in the 1960s and early 1970s—for a scheme to produce, assemble, re-assemble or market a series of modern, all-metal Italian and French lightplanes (semi-monocoque, enclosed-cabin, low-wing, single-engine) under licence in the United States. The program was headed by a "Mr. Berger," and the enterprise was known (in 1968) as Waco Aircraft Co., a subsidiary of Allied Aero Industries, Inc., and based at Pottstown-Limerick Airport, Pottstown, Pennsylvania, with dealers in Connecticut, Georgia, Oklahoma, Texas, California, and Ontario, Canada. [7] The European WACOs—in some cases replacing the original Lycoming engines with less-popular Franklin engines (Mr. Berger was involved with Franklin) -- were to be manufactured (or at least assembled or re-assembled) in the U.S. by WACO Aircraft Company at Syracuse, New York. Only several dozen (perhaps 65–150) of these European-origin aircraft were sold as WACOs before the death of Mr. Berger put an end to the program. These planes included: [8] [9] [10] [11] [12] [13]
The WACO Classic Aircraft company (unrelated to the original Waco) began building its WACO Classic YMF in 1986, an upgraded version based on Waco's original type certified design. [15]
A large number of survivors exist, with the largest single collection residing at the Historic Aircraft Restoration Museum at Dauster Field, Creve Coeur, near St Louis, Missouri. [16]
Letter | Engine |
---|---|
A | Jacobs L-6MB |
B | Wright R-540 |
C | Wright R-760 |
D | Wright R-760-E1 |
E | Wright R-760-E2 |
H | Lycoming R-680-E3 |
I | Kinner B-5 |
J | Wright R-975-E1 |
K | Kinner K-5 |
M | Menasco C-4 |
O | Kinner C-5 |
P | Jacobs LA-1 |
Q | Continental A-70 |
R | Warner Scarab |
S | Pratt & Whitney R-985 |
U | Continental R-670, W-670-K, W-670-6 |
V | Continental W-670-M |
W | Wright R-975-E3 |
Y | Jacobs L-4MB |
Z | Jacobs L-5MB |
Note: Waco civilian designations describe the configuration of the aircraft. The first letter lists the engine used, the second the specific type, and the third the general series. The coding system was changed in 1929 with several letters reassigned, and later with the introduction of the Custom Cabin series, the third letter 'C' was initially replaced with C-S (Cabin-Standard) and finally S. [18] The numeral suffix represents the first year of production if it is 6 or higher (6=1936), or a sub type if 2 or less. Thus EGC-7 is a Wright R-760-E2 (350 hp (261 kW)) engined, cabin biplane airframe, custom cabin model first manufactured in 1937. [17]
Many Waco Cabin Biplanes that were originally sold as civilian aircraft, were impressed into military service in World War II. The United States Army Air Forces classified theirs regardless of type as Waco C-72s, with type letters identifying specific models. Other countries used other designations for their own Wacos.
The Beechcraft Model 17 Staggerwing is an American biplane with an atypical negative wing stagger. It first flew in 1932.
The Howard DGA-15 was a single-engine civil aircraft produced in the United States by the Howard Aircraft Corporation from 1939 to 1944. After the United States' entry into World War II, it was built in large numbers for the United States Navy and also served various roles in the United States Army Air Forces.
The Stinson Reliant is a popular single-engine four- to five-seat high-wing monoplane manufactured by the Stinson Aircraft Division of the Aviation Manufacturing Corporation of Wayne, Michigan.
The Waco Custom Cabins were a series of up-market single-engined four-to-five-seat cabin sesquiplanes of the late 1930s produced by the Waco Aircraft Company of the United States. "Custom Cabin" was Waco's own description of the aircraft which despite minor differences, were all fabric-covered biplanes.
C-72 was a blanket designation given to a variety of privately owned Waco enclosed-cabin biplanes pressed into service by the United States Army Air Forces in 1942. In all, 42 aircraft were taken and used for light transport duty wherever needed.
The Continental R-670 was a seven-cylinder four-stroke radial aircraft engine produced by Continental displacing 668 cubic inches and a dry weight of 465 lb (211 kg). Horsepower varied from 210 to 240 at 2,200 rpm. The engine was the successor to Continental's first radial engine, the 170 hp Continental A-70. This engine was used on many aircraft in the 1930s and 1940s. The R-670 was widely used in the PT-17 Stearman primary training aircraft of the U.S. military.
The Wright R-975 Whirlwind was a series of nine-cylinder air-cooled radial aircraft engines built by the Wright Aeronautical division of Curtiss-Wright. These engines had a displacement of about 975 cu in (15.98 L) and power ratings of 300–450 hp (220–340 kW). They were the largest members of the Wright Whirlwind engine family to be produced commercially, and they were also the most numerous.
The Jacobs R-755 is a seven-cylinder, air-cooled, radial engine for aircraft manufactured in the United States by the Jacobs Aircraft Engine Company.
The Wright R-760 Whirlwind was a series of seven-cylinder air-cooled radial aircraft engines built by the Wright Aeronautical division of Curtiss-Wright. These engines had a displacement of 756 in³ (12.4 L) and power ratings of 225-350 hp (168-261 kW).
The Consolidated Model 2 was a PT-1 biplane trainer diverted to the United States Navy for a trainer competition in 1925. It beat out 14 other designs, and was ordered into production as the NY-1.
The Lycoming R-680 is a nine-cylinder air-cooled radial engine, the first aero engine produced by Lycoming. The engine was produced in two types, the E and B series; both are essentially the same. The B4E was available in a trainer version with a front exhaust collector "ring" for use without cylinder air baffles. R-680 received Approved Type Certificate No. 42 on 4 Feb 1930.
The Stinson Detroiter was a six-seat cabin airliner for passengers or freight designed and built by the Stinson Aircraft Syndicate, later the Stinson Aircraft Corporation. Two distinct designs used the Detroiter name, a biplane and a monoplane.
The Stearman C3 was an American-built civil biplane aircraft of the 1920s, designed by Stearman Aircraft of Wichita, Kansas. It was also the first Stearman aircraft to receive a type certificate.
The Waco F series is a series of American-built general aviation and military biplane trainers of the 1930s from the Waco Aircraft Company.
The Waco A series is a range of light American-built twin side-by-side seater sporting biplanes of the early 1930s.
The Waco N series is a range of 1930s American-built cabin biplanes with a fixed tricycle undercarriage produced by the Waco Aircraft Company.
The Waco Standard Cabin series is a range of American single-engine 4–5 seat fabric covered cabin biplanes produced by the Waco Aircraft Company beginning in 1931 with the QDC and continuing until 1942 when production ended for the VKS-7F. They were used as light passenger and utility transports, navigational trainers, bushplanes and briefly as maritime reconnaissance aircraft during World War 2.
The Waco S Series is a family of American cabin biplanes produced by the Waco Aircraft Company starting in 1935.
The Waco E series is a small family of American-built cabin biplanes built between 1939 and 1942, which differed primarily by engine installation.
The Waco D Series was a series of military biplanes created between 1934 and 1937 by the Waco Aircraft Company for export to countries other than the United States. The three letter designation indicated the engine, airframe, and series. Armed versions had a -A suffix.