| Waco S series | |
|---|---|
 | |
| Waco YKS-6 of 1936 at Sun n'Fun, Lakeland, Florida, in April 2009 | |
| Role | single-engine light cabin biplane |
| National origin | United States |
| Manufacturer | Waco Aircraft Company |
| First flight | 1935 |
| Status | several airworthy in 2009 |
| Primary user | small commercial operators and private owner pilots |
| Developed from | Waco Standard Cabin series |
The Waco S Series is a family of American cabin biplanes produced by the Waco Aircraft Company starting in 1935.
The Waco closed cabin biplanes, initially known as the C (for Cabin) series were all unequal span, staggered single bay biplanes. They were fabric covered, the wings having a wooden structure and the control surfaces and fuselage constructed from metal frames. The wings were braced with outward splayed N form interplane struts plus a strut connecting the centre section rear spar to the bottom of the forward interplane strut, following Waco's standard practice. They had a fixed tailwheel undercarriage, which could be partially or completely faired. There was seating for 4/5 including the pilot. Most were powered by 7 cylinder radial engines of different makes.
When Waco released its slightly larger custom cabin series, those original Cabin series aircraft it continued to produce were redesignated as 'Waco Standard Cabin series', with the final designation letter changing from C to C-S to S. For instance in 1935 the YKC became the YKC-S, then the YKS-6 in 1936. All three were indistinguishable from each other. [1] [2] Waco used numeric suffixes like -7 to indicate a subvariant introduced in 1937 and so on. The standard cabin can be subdivided again into three groups, early examples having a boat-tail skylight (QDC, OEC & UEC), mid series aircraft with a faired skylight (CJC, UIC, UKC, YKC) or late examples with no skylight (DJC-S, HKS, ZKS, UKC-S UKS-7, VKS-7, YKC-S, YKS-6 & 7, ZKS-6 & 7). All of the types built under the C-S and S designators lacked a skylight though the skylight could be faired over on earlier aircraft. Later types were also slightly longer than earlier models.
From about 1937, all S series aircraft had wings lacking leading and trailing edge cutouts. Externally, the S series differed from the Custom or later C series in continuing with early C series features such as ailerons on both wings, linked by a prominent strut, and square edged rear side windows. Like most Waco aircraft, the S series were available with many different engines (identified by the first letter of the type designation).
The S series proved to be popular with both commercial and private pilots and over 50 were still airworthy in 2001, including examples of the CPTP VKS-7F version. During the Second World War several S series aircraft were impressed by the USAAF as the UC-72K or UC-72M and used as Liaison, executive light transport and instrument refresher training aircraft. [3] Only a handful remain airworthy in this century.
(per Simpson, 2001, p. 575 and Green, 1965, p. 307)
Data from Green, 1965, p. 307
General characteristics
Performance
The Piper J-3 Cub is an American light aircraft that was built between 1938 and 1947 by Piper Aircraft. The aircraft has a simple, lightweight design which gives it good low-speed handling properties and short-field performance. The Cub is Piper Aircraft's most-produced model, with nearly 20,000 built in the United States. Its simplicity, affordability and popularity invokes comparisons to the Ford Model T automobile.
The Stinson Reliant is a popular single-engine four- to five-seat high-wing monoplane manufactured by the Stinson Aircraft Division of the Aviation Manufacturing Corporation of Wayne, Michigan.
The Waco Custom Cabins were a series of up-market single-engined four-to-five-seat cabin sesquiplanes of the late 1930s produced by the Waco Aircraft Company of the United States. "Custom Cabin" was Waco's own description of the aircraft which despite minor differences, were all fabric-covered biplanes.
C-72 was a blanket designation given to a variety of privately owned Waco enclosed-cabin biplanes pressed into service by the United States Army Air Forces in 1942. In all, 42 aircraft were taken and used for light transport duty wherever needed.
The Continental R-670 was a seven-cylinder four-cycle radial aircraft engine produced by Continental displacing 668 cubic inches and a dry weight of 465 lb (211 kg). Horsepower varied from 210 to 240 at 2,200 rpm. The engine was the successor to Continental's first radial engine, the 170 hp Continental A-70. This engine was used on many aircraft in the 1930s and 1940s. The R-670 was widely used in the PT-17 Stearman primary training aircraft of the U.S. military.
The Canadian Vickers Vanessa was a Canadian biplane transport seaplane of the 1920s. It was a single-engine, twin-float biplane of mixed construction, evaluated by the Royal Canadian Air Force and used for experimental air-mail services..
The Jacobs R-755 is a seven-cylinder, air-cooled, radial engine for aircraft manufactured in the United States by the Jacobs Aircraft Engine Company.
The Waco Aircraft Company (WACO) was an aircraft manufacturer located in Troy, Ohio, United States. Between 1920 and 1947, the company produced a wide range of civilian biplanes.
The Fairchild Model 45 was a 1930s American five-seat cabin monoplane aircraft designed and built by Fairchild.
The Lycoming R-680 is a nine-cylinder air-cooled radial engine, the first aero engine produced by Lycoming. The engine was produced in two types, the E and B series; both are essentially the same. The B4E was available in a trainer version with a front exhaust collector "ring" for use without cylinder air baffles. R-680 received Approved Type Certificate No. 42 on 4 Feb 1930.
The Taylorcraft Model 20 Ranch Wagon was a four-seat cabin monoplane designed and built by Taylorcraft Aircraft as a development of the earlier experimental Model 18. The Model 20 was constructed of moulded fibreglass over a tubular framework. It had a conventional landing gear and a nose-mounted 225 hp (168 kW) Continental O-470-J engine.
The Spartan C3 is an American three-seat open-cockpit utility biplane from the late 1920s.
The Waco F series is a series of American-built general aviation and military biplane trainers of the 1930s from the Waco Aircraft Company.
The Waco A series is a range of light American-built twin side-by-side seater sporting biplanes of the early 1930s.
The Waco N series is a range of 1930s American-built cabin biplanes with a fixed tricycle undercarriage produced by the Waco Aircraft Company.
The Waco Standard Cabin series is a range of American single-engine 4–5 seat fabric covered cabin biplanes produced by the Waco Aircraft Company beginning in 1931 with the QDC and continuing until 1942 when production ended for the VKS-7F. They were used as light passenger and utility transports, navigational trainers, bushplanes and briefly as maritime reconnaissance aircraft during World War 2.
The Swallow Airplane Swallow is an American-built general purpose biplane of the mid to late 1920s.
The Waco E series is a small family of American-built cabin biplanes built between 1939 and 1942, which differed primarily by engine installation.
The Aristocraft II was a six-place homebuilt aircraft designed by Terrence O'Neill.
 | Wikimedia Commons has media related to Waco YKS-6 . |