Waco Custom Cabin series | |
---|---|
General information | |
Type | Four to five place cabin sesquiplane |
Manufacturer | Waco Aircraft Company |
Primary user | Private individuals, air taxiis |
Number built | 350+ |
History | |
Manufactured | 1935–1939 |
Introduction date | 1935 |
First flight | 1935 |
Variants | Waco E series, Waco N series |
The Waco Custom Cabins were a series of up-market single-engined four-to-five-seat cabin sesquiplanes of the late 1930s produced by the Waco Aircraft Company of the United States. "Custom Cabin" was Waco's own description of the aircraft which despite minor differences, were all fabric-covered biplanes.
Nearly all of the Waco Custom Cabins were powered by radial engines (there being one factory-built exception, the MGC-8) and the purchaser could specify almost any commercially available engine and Waco would build an aircraft powered by it, hence the profusion of designations, as the first letter indicates the engine installed. Some models were offered in case someone wanted a specific engine but not all were built. Fuselage structure was typical for the period, being welded steel tubing with light wood strips to fair the shape in. The wings were made of spruce with two spars each, having ailerons on only the upper wings, mounted on a false spar. Split flaps were installed on the undersides of the upper wings, though two designs were used depending on model – placed either mid-chord (OC, UC and QC), or in the conventional position at the trailing edge of the wing (GC and N). The model N was unusual in being the only model with flaps on the lower wings while the model E was the only one with plain flaps. Wing bracing was with a heavily canted N strut joining upper and lower wings, assisted by a single strut bracing the lower wing to the upper fuselage longeron, except on the E series which replaced the single strut with flying and landing wires. Elevators and rudder were aerodynamically counterbalanced and braced with wire cables. Both could be trimmed, the rudder via a ground-adjustable tab, the elevators via jack screw on the OC, UC and QC, while the GC, E and N used a single trim tab on the port (left) elevator. The main landing gear was sprung with oleo struts, and a castoring tailwheel was fitted on all versions except the VN model, which had a nosewheel.
Waco had been building a series of successful cabin biplanes, when in 1935 they introduced a new series of upmarket cabin sesquiplanes intended for the wealthy private individual or business. The original biplanes had been given a designation ending in C, however with the new Custom Cabin, Waco decided to differentiate the new design and existing C types that remained in production were recoded as C-S types to indicate Standard Cabin, until Waco changed their designation again in 1936 to just an S. [1] For example, the 1934 Standard Cabin YKC was redesignated as a YKC-S in 1935, and as a YKS-6 in 1936. [1] 1936 also saw the adoption of a numerical suffix to indicate the model year of the design, as "-6" for 1936, "-7" for 1937, etc. Since it referred to a model and not the year of production, the "-7" was carried into 1939 for some Custom Cabins, while others were designated "-8". [2] In 1936, Waco started using a short form to refer to the types of aircraft without the engine and model identifiers resulting in C-6, C-7 and C-8 however as Waco only built one type of Custom cabin in each of those years, they refer to the QC-6, GC-7 and GC-8 series respectively. [3]
The Custom Cabin series, with its improved performance proved to be popular and many were purchased by small commercial aviation firms and non-aviation businesses. Approximately 300 Custom Cabin Wacos of all types (excluding the Waco E series and the Waco N series), were produced between 1935 and 1939. Some were employed as "executive transports". Many served in the Canadian bush country, where they normally operated on skis in winter and EDO floats in summer. Many of these Canadian Wacos were ordered and built as freighters with additional doors. In 1936 an EQC-6 operated by Speers Airways of Regina, Saskatchewan was the first non-military government operated air ambulance in Canada. [4] With the onset of World War II, examples were impressed into the air forces of many Allied nations, including the US (USAAC and US Navy), the United Kingdom, South Africa, Australia and New Zealand. Most were used as utility aircraft, however a small number were operated by the US Civil Air Patrol, conducting anti-submarine patrols off the US coastline from March 1942 to August 1943 armed with 50- or 100-pound bombs. [5] A single impressed ZGC-7 referred to as the Big Waco, RAF serial AX695, was used by the British Long Range Desert Group (LRDG) along with a Standard Cabin YKC named Little Waco to support their activities behind Axis lines. [6] Flight Regiment 19, Finnish Air Force (Swedish Volunteer Air Force) used one Waco ZQC-6 (OH-SLA) during the Russo-Finnish Winter War in support of Finnish military operations. Numerous Custom Cabin series aircraft of several sub-models are currently registered in the US, and more are in under restoration. This is still a popular design among owners of classic aircraft.
The Waco Custom cabin series included all of the enlarged-cabin sesquiplanes from 1935 and can be further divided into six basic models, OC, UC QC, GC, RE and VN, with additional subtypes differing primarily in engine installation (indicated by the first letter of the designation or by a low dash number, i.e. -1, -2) and by model year (dash numbers -6, -7, -8). Letters were not used sequentially. Each basic type was offered with almost any engine the customer wished and designations were created accordingly, however some engines were more popular than others resulting in some types being offered, but never built. Due to the wide variety of engines already offered, it was both relatively easy and common to change the installed engine, resulting in a lot of confusion as to the correct designation to use for a specific airframe.
The RE series is more refined aerodynamically than earlier models; the wings are fully plywood-skinned, and instead of a bulky compression strut carrying lift loads, a more conventional set of streamlined flying wires completes the wing structure. It has the fastest cruise speed of any of the Waco cabin models, with a Vne of 270 mph.
UC-72B | : | EGC-8 | four impressed |
UC-72E | : | ZGC-7 | four impressed |
UC-72P | : | AGC-8 | two impressed |
UC-72Q | : | ZQC-6 | one impressed |
UC-72G | : | AQC-6 | one impressed |
UC-72H | : | ZQC-6 | five impressed |
UC-72F | : | CUC-1 | one impressed |
Wacos were used in small numbers by a very large number of individual operators in many countries. [12]
Most operators operated either a single example, or a very small number.
Aside from the large number of privately owned Wacos that continue to exist, [22] a number have also found their way into museums.
Museum | Location | Type | Identity |
Canadian Museum of Flight [23] | Langley, BC | AQC-6 | CF-CCW |
EAA AirVenture Museum [24] | Oshkosh, WI | ARE | NC20953 |
Historic Aircraft Restoration Museum [25] | Maryland Heights, MO | AVN-8 | NC19378 |
Golden Wings Flying Museum [26] | Minneapolis, MN | CUC-1 | NC15233 |
Virginia Aviation Museum [27] | Richmond, VA | YOC | NC17740 |
War Eagles Air Museum [28] | Santa Teresa, NM | EGC-8 | NC19354 |
Yukon Transportation Museum [29] | Whitehorse, YT | ZQC-6 | CF-BDZ |
Data from Juptner, U.S. Civil Aircraft Series, Vol. 6 [30]
General characteristics
Performance
Related development
Aircraft of comparable role, configuration, and era
Related lists
The Beechcraft Model 17 Staggerwing is an American biplane with an atypical negative wing stagger. It first flew in 1932 and was sold on the civilian market being used for transport and air racing. During WW2 it was by allied forces, and after the war continued in civilian production until 1949, with 785 having been produced.
The Fairchild Model 24, also called the Fairchild Model 24 Argus and UC-61 Forwarder, is a four-seat, single-engine monoplane light transport aircraft designed by the Fairchild Aviation Corporation in the 1930s. It was adopted by the United States Army Air Corps as UC-61 and also by the Royal Air Force. The Model 24 was itself a development of previous Fairchild models and became a successful civil and military utility aircraft. It first flew in 1932, and over 2230 would be produced by the time production ended in the late 1940s.
The Howard DGA-15 is a single-engine civil aircraft produced in the United States by the Howard Aircraft Corporation from 1939 to 1944. After the United States' entry into World War II, it was built in large numbers for the United States Navy and also served various roles in the United States Army Air Forces.
The Beechcraft Model 18 is a 6- to 11-seat, twin-engined, low-wing, tailwheel light aircraft manufactured by the Beech Aircraft Corporation of Wichita, Kansas. Continuously produced from 1937 to November 1969, over 9,000 were built, making it one of the world's most widely used light aircraft. Sold worldwide as a civilian executive, utility, cargo aircraft, and passenger airliner on tailwheels, nosewheels, skis, or floats, it was also used as a military aircraft.
The Stinson Reliant is a popular single-engine four- to five-seat high-wing monoplane manufactured by the Stinson Aircraft Division of the Aviation Manufacturing Corporation of Wayne, Michigan.
The Howard DGA-8, DGA-9, DGA-11, and DGA-12 were a family of four-place, single-engine, high-wing light monoplanes built by the Howard Aircraft Corporation, Chicago, Illinois from 1936.
C-72 was a blanket designation given to a variety of privately owned Waco enclosed-cabin biplanes pressed into service by the United States Army Air Forces in 1942. In all, 42 aircraft were taken and used for light transport duty wherever needed.
The Cessna Airmaster, is a family of single-engined aircraft manufactured by the Cessna Aircraft Company. The Airmaster played an important role in the revitalization of Cessna in the 1930s after the crash of the aviation industry during the Great Depression.
The Jacobs R-755 is a seven-cylinder, air-cooled, radial engine for aircraft manufactured in the United States by the Jacobs Aircraft Engine Company.
The Waco Aircraft Company (WACO) was an aircraft manufacturer located in Troy, Ohio, United States. Between 1920 and 1947, the company produced a wide range of civilian biplanes.
The Wright R-760 Whirlwind was a series of seven-cylinder air-cooled radial aircraft engines built by the Wright Aeronautical division of Curtiss-Wright. These engines had a displacement of 756 in³ (12.4 L) and power ratings of 225-350 hp (168-261 kW).
The Cessna Model DC-6 was a 1920s American high-wing four-seat tourer built by the Cessna Aircraft Company. It was used by the United States Army Air Corps as the UC-77/UC-77A.
The Stinson Voyager was an American light utility monoplane built during the 1940s by the Stinson Aircraft Company.
The Fairchild Model 45 was a 1930s American five-seat cabin monoplane aircraft designed and built by Fairchild.
The Jacobs R-830 or L-5 is a seven-cylinder, air-cooled, radial engine for aircraft manufactured in the United States by the Jacobs Aircraft Engine Company, beginning in 1935.
The Waco F series is a series of American-built general aviation and military biplane trainers of the 1930s from the Waco Aircraft Company.
The Waco N series is a range of 1930s American-built cabin biplanes with a fixed tricycle undercarriage produced by the Waco Aircraft Company.
The Waco Standard Cabin series is a range of American single-engine 4–5 seat fabric covered cabin biplanes produced by the Waco Aircraft Company beginning in 1931 with the QDC and continuing until 1942 when production ended for the VKS-7F. They were used as light passenger and utility transports, navigational trainers, bushplanes and briefly as maritime reconnaissance aircraft during World War 2.
The Waco S Series is a family of American cabin biplanes produced by the Waco Aircraft Company starting in 1935.
The Waco E series is a small family of American-built cabin biplanes built between 1939 and 1942, which differed primarily by engine installation.
Juptner, Joseph P. (1993). U.S. Civil Aircraft Vol. 6 . McGraw-Hill. ISBN 978-0830643714.