Type 110A | |
---|---|
At the Olympia show of July 1929 with mockup Neptune engine | |
Role | Civil transport |
National origin | United Kingdom |
Manufacturer | Bristol Aeroplane Company |
Designer | Frank Barnwell |
First flight | 25 October 1929 |
Retired | February 1930 |
Number built | 1 |
The Bristol Type 110A was a single-engine biplane for charter work, accommodating four passengers in comfort. Designed by Frank Barnwell and built at Filton Aerodrome by the Bristol Aeroplane Company. No orders were obtained and only one aircraft was built.
The Bristol 110A [1] was a four-passenger biplane aimed at the charter market, a slightly enlarged version of a projected Type 110 three-passenger aeroplane. It was a single-engine, single-bay biplane that could be powered by one of two smaller relatives of the nine-cylinder Bristol Jupiter radial engine: the five-cylinder, 220 hp (164 kW) Titan or the seven-cylinder 315 hp (235 kW) Neptune. The wings were unswept, unstaggered, and of almost equal span, but the lower plane has a much narrower chord than the upper. Frise-type ailerons were fitted only on the upper wing. The Type 110A was an all-metal, fabric-covered aircraft with a flat-sided fuselage, a horn-balanced rudder and an unbraced horizontal tail carrying unbalanced elevators. The passenger cabin, located between the wings, had three windows on each side, one of which was on the starboard side door. [2] The pilot sat high ahead of the leading edge of the upper wing in a glazed cockpit behind the completely cowled engine. The undercarriage was of the divided type, with wide track main wheels and a tailskid. [1]
The Type 110A, registered G-AAFG, [3] first flew with the Titan engine, piloted by Cyril Uwins, on 25 October 1929, [4] after its appearance with a mockup Neptune engine at the Olympia Aero Show in July that year, [5] where its well-appointed cabin impressed visitors but gained no orders. The Neptune was installed in January 1930 and testing proceeded satisfactorily until the aircraft was damaged in a landing accident in early February; as there were no orders in sight, it was decided to abandon the project and the aircraft was scrapped. [6] [7]
Data from Barnes 1970, p. 238 Barnes does not say whether these specifications apply to the Titan or Neptune variant. Dimensions will not be much affected, weights and performance more so, They are more likely to refer to the Titan-powered 110A as this was tested longer.
General characteristics
Performance
The Boxkite was the first aircraft produced by the British and Colonial Aeroplane Company. A pusher biplane based on the successful Farman III, it was one of the first aircraft types to be built in quantity. As the type was used by Bristol for instruction purposes at their flying schools at Larkhill and Brooklands many early British aviators learned to fly in a Boxkite. Four were purchased in 1911 by the War Office and examples were sold to Russia and Australia. It continued to be used for training purposes until after the outbreak of the First World War.
The Short Springbok was a two-seat, all-metal reconnaissance biplane produced for the British Air Ministry in the 1920s. All together six aircraft of the Springbok design were built but none entered service with the armed forces.
The Short L.17 Scylla was a British four-engined 39-seat biplane airliner designed and built by Short Brothers at the request of Imperial Airways to supplement the Handley Page H.P.42 fleet already in service after Handley Page quoted an excessive price for two additional H.P.42s. They were ordered in 1933.
The Armstrong Whitworth A.W.14 Starling was a prototype British single-seat biplane fighter developed for the Royal Air Force in the late 1920s which unsuccessfully competed against the Bristol Bulldog.
The Bristol Ten-seater and Bristol Brandon were British single-engine biplane transport aircraft built by the Bristol Aeroplane Company in the early 1920s. Only three were built, two of which were used as civil transports and one of which served with the Royal Air Force.
The Bristol Taxiplane and Bristol Primary Trainer were British single-engine biplane light aircraft built by the Bristol Aeroplane Company in the early 1920s. A total of 28 were built, being mainly used as trainers.
The Bristol Titan was a British five-cylinder air-cooled radial engine, designed and built by the Bristol Aeroplane Company in the late 1920s. It had the same size cylinders as the earlier Bristol Mercury engine, 5.75 in × 6.5 in, and produced between 200–240 hp (150–180 kW). Later versions of the Bristol Titan also used a Farman-style reduction gear produced by Gnome-Rhône.
The Bristol Gordon England biplanes were a series of early British military biplane aircraft designed by Eric Gordon England for the Bristol Aeroplane Company that first flew in 1912. Designed for easy ground transport, the aircraft could be quickly disassembled.
The Bristol Bloodhound was a British two-seat reconnaissance/fighter aircraft designed and built by the Bristol Aeroplane Company as a possible replacement for the Bristol F.2 Fighter for the Royal Air Force. It was unsuccessful, only four prototypes being built.
The Avro 562 Avis was a two-seat light biplane designed and built by A.V.Roe and Company Limited at Hamble for the 1924 Lympne Light Aeroplane Trials.
The Bristol Type 109 was a British two-seat long-distance biplane built by the Bristol Aeroplane Company at Filton Aerodrome, England.
The Bristol Badger was designed to meet a British need for a two-seat fighter-reconnaissance aeroplane at the end of the First World War. Three Badgers were delivered to the Air Board to develop air-cooled radial engines, particularly that which became the Bristol Jupiter; two other Badgers were also built.
The Bristol Babe was a British-built light single-seat biplane, intended for the private flyer and produced immediately after the First World War. Only two flew.
The Bristol Seely was entered into an Air Ministry competition for safe civil aeroplanes held in 1920. It was a single-engine biplane with accommodation for one passenger. After the competition, the single Seely was used as a testbed for the Bristol Jupiter engine development programme.
The Bristol Type 92, sometimes known as the Laboratory biplane, was an aircraft built by the Bristol Aeroplane Company to address the differences between wind tunnel cowling models and full scale cowling for radial engines and was designed as a scaled-up version of a wind tunnel model aircraft. One was built and flew in the mid-1920s.
The Bristol Type 118 was a general-purpose military aircraft, a two-seat biplane built by the Bristol Aeroplane Company in the early 1930s, powered by a Bristol Mercury radial engine and aimed at overseas markets. The Type 120 was a Bristol Pegasus-engined variant entered into an Air Ministry competition and later used for armament tests. Two aircraft were built.
The Bristol Type 133 was a single-seat, single-engine monoplane fighter armed with four guns, using stressed-skin construction and with a retractable undercarriage. It was built by The Bristol Aeroplane Co. to meet Specification F.7/30. The single example crashed before the trials commenced.
The Vickers Viastra was an all-metal 12-seat passenger high-wing monoplane, with variants powered by one, two and three engines. Two twin-engined Viastras operated commercially in Australia from 1931-6; another served as a Royal transport.
The Vickers Vellore was a large biplane designed as a freight and mail carrier, in single-engined and twin-engined versions, which saw limited use as freighters and long-range experimental aircraft. A final variant with a broader fuselage, the Vellox, was completed as an airliner.
The Bristol Scout E and F were a British single-seat biplane fighters built in 1916 to use newer and more powerful engines. It was initially powered by the Sunbeam Arab, but the third prototype was used as a testbed for the Cosmos Mercury, marking the start of Roy Fedden's association with the Bristol Aeroplane Company. The Armistice ended hopes of production.