Type 175 Britannia | |
---|---|
General information | |
Type | Turboprop airliner |
Manufacturer | Bristol Aeroplane Company |
Designer | Dr. Archibald E. Russell [1] |
Status | Retired |
Primary users | BOAC |
Number built | 85 |
History | |
Manufactured | 1952–1960 |
Introduction date | 1 February 1957 with BOAC |
First flight | 16 August 1952 |
Variants | Canadair CP-107 Argus Canadair CL-44/Canadair CC-106 Yukon Conroy Skymonster |
The Bristol Type 175 Britannia is a retired British medium-to-long-range airliner built by the Bristol Aeroplane Company in 1952 to meet British civilian aviation needs. During development two prototypes were lost and the turboprop engines proved susceptible to inlet icing, which delayed entry into service while solutions were sought.
By the time development was completed, "pure" jet airliners from France, the United Kingdom, and the United States were about to enter service, and consequently, only 85 Britannias were built before production ended in 1960. Nevertheless, the Britannia is considered one of the landmarks in turboprop-powered airliner design and was popular with passengers. It became known as "The Whispering Giant" for its quiet exterior noise and smooth flying, although the passenger interior remained less tranquil. [2] [3]
Canadair purchased a licence to build the Britannia in Canada, adding another 72 aircraft in two variants. These were the stretched Canadair CL-44/Canadair CC-106 Yukon, and the greatly modified Canadair CP-107 Argus maritime patrol aircraft.
In 1942, during the Second World War, Allied aircraft construction saw the UK of necessity concentrating on heavy bombers, leaving the production of transport aircraft to the USA. [4] This would have left the UK with little experience in transport construction at the end of the war, so in 1943, a committee under Lord Brabazon of Tara investigated the future British civilian airliner market. The Brabazon Committee called for several aircraft to be developed to its specifications for Britain's civilian aviation needs. [5]
Bristol won the Type I and Type III contracts, delivering their Type I design, the Bristol Brabazon in 1949. [6] The requirement for the 1946 British Overseas Airways Corporation (BOAC) Medium Range Empire (MRE) Requirements coincided with the Type III, Specification C.2/47, issued in April 1947 by the Minister of Supply. [7] The specifications called for an airliner capable of carrying 48 passengers and powered with Bristol Centaurus radial engines or Napier Nomad turbo-compound Diesel engine. [8] Turboprop options were also considered, but they were so new that Bristol could not guarantee their performance. [8] [9]
Although in-company Proposals "X" for conversions of Lockheed Constellations to Centaurus 662 powerplants or "Y" for licence production of the Constellation were considered in late 1946, BOAC decided that an entirely new design was preferred. [7] After wrangling between the Ministry of Supply and BOAC over costs, the go-ahead for the project assigned the company designation Model 175 in July 1948. [10] Three prototypes were ordered with the first being Mk 1 (Centaurus 662), and the second and third prototypes designated Mk 2 (to be convertible to Bristol Proteus turboprops, then under development). [1]
In October 1947, with work already underway, Bristol had settled on a Centaurus-powered design with a gross weight of 103,000 lb (47,000 kg) and a payload of 13,300 lb (6,000 kg). The anticipated Karachi-Cairo run necessitated a 48-seat limit including sufficient fuel for the lengthy stage. On 5 July 1949, the Ministry of Supply ordered five such prototypes with the understanding that BOAC would contract for 25 production units. [8] BOAC purchased options for 25 aircraft on 28 July powered by the Bristol Centaurus, but to be re-fitted with the Bristol Proteus when available. [10]
In November 1948, the Type 175 was revised again to accommodate 74 passengers and a longer wingspan in a contemplated long-range version aimed at long-haul Empire and transatlantic routes rather than the medium-haul Empire routes originally planned. [11] On reflection, BOAC decided that only the Proteus engine was viable, necessitating a further redesign eliminating the Centaurus option. Senior figures within BOAC such as the Deputy Chairman Whitney Straight, however, considered the Proteus engine to be "an obsolete contraption". [12] [N 1] Despite BOAC's desire to have a turboprop engine, the Type 175 project was contingent on the Proteus passing a 150-hour Type Test. [13]
During April 1950, the airliner's name, Britannia, was selected. The designation Britannia 101 was applied to first pair of prototypes, which were powered by the early Proteus 625, the successor to the 600 series engine that had already completed type trials. [14]
The first prototype, registered G-ALBO, with Bristol Chief Test Pilot A.J. "Bill" Pegg at the controls, first flew on 16 August 1952 at Filton Aerodrome. [3] [15] During the maiden flight, the over-sensitive flying controls led to wild pitching before Pegg restored control. During the landing approach, smoke filled the cockpit and the main undercarriage bogie temporarily stuck, only fully deploying seconds before landing. [15] The snags were resolved and by September, the prototype was cleared to perform at the 1952 SBAC Display at Farnborough where spectators commented on the "quietness" of the giant airliner. [1] In November 1952, Popular Science reported that by 1954 BOAC would have 25 of these aircraft on routes such as London-to-Tokyo over the Arctic and North Pole. [16]
After three de Havilland Comets crashed without explanation in 1953 and 1954, the Air Ministry demanded that the Britannia undergo lengthy tests. [17] Further delays were attributed to teething problems with the engine resulting in the loss in February 1954 of the second prototype, G-ALRX, caused by a failed reduction gear that led to an engine fire and the aircraft landing on the mudflats of the Severn Estuary. [N 2] Finally, time was lost in resolving inlet icing issues (by selecting a different cruising height) that were discovered as the first aircraft were being delivered to BOAC. These were exaggerated by BOAC, devastated future sales and delayed the Britannia's introduction by two years. [18] [19] [20]
The first prototype G-ALBO was modified to more closely approximate a production standard, but was retained by the company to undergo engine testing and development. [21] Bristol revised the design into a larger transatlantic airliner for BOAC, resulting in the Series 200 and 300; the Britannia 300LR (Long-Range) was viewed as being "eminently suitable" for BOAC's services between London and Sydney. [22] The purchase price for each Britannia 100-series aircraft was agreed by BOAC in 1955 at £768,000. [23]
Australian airline Qantas considered the procurement of a Britannia fleet, however its protracted development eroded any competitive advantage against the Douglas DC-8 and de Havilland Comet 4. [24] Route-proving trials continued through 1955, although orders were on the books from El Al and Canadian Pacific Air Lines alongside the standing order placed by BOAC. [21]
During the first eight months of its operational trials, [N 3] a total of 16 in-flight engine failures and 49 unscheduled engine changes punctuated the ongoing engine problem and delayed the Britannia's in-service date until February 1957, roughly two years late. [25] [26] The Britannia received a fair amount of attention in both the popular press and the British House of Commons, especially when it was revealed that BOAC had contemplated fitting Rolls-Royce Tynes to their fleet of Douglas DC-7s as an interim measure until the Britannia was cleared for service. [1]
In 1956, Bristol's managing director Peter Masefield flew the tenth production Britannia, G-ANBJ, on a world sales tour. American interest was strong, since the Britannia seemed to be a faster, longer-range, higher-capacity sister of the Vickers Viscount, which was already a marketing success on US domestic routes, and, compared to the piston-engined DC-7C, itself a new type, the Britannia offered similar transcontinental or transatlantic range with greater speeds and the public appeal of more modern powerplants. Eastern Air Lines and TWA both wished to place orders, which might have forced competitors to follow suit. TWA's majority owner Howard Hughes took the controls of the Britannia for one flight and immediately requested 30 aircraft. However, the Americans wanted delivery within a couple of years, and Bristol, with its limited production facilities and the prior commitment to the BOAC order, could not meet that requirement, so, with the Boeing 707 and Douglas DC-8 jets expected in service by 1958-9, the opportunity passed. [27]
Aviation historian Peter Pigott summarised the impact of the delays:
Had the Britannia appeared in 1950, when it was faster than every American aircraft, it would have put the British at the forefront of commercial aviation sales. Now, competing with the Boeing 707, the turboprop airliner had become passé. [28] [N 4]
In 1954, a licence was issued to Canadair to build the derivative Canadair CL-28/CP-107 Argus, and the Canadair CL-44/Canadair CC-106 Yukon. [29] Based on the Britannia, the Argus maritime patrol and anti-submarine military aircraft was optimised for endurance on long-range patrol, not speed, and used four Wright R-3350-32W Turbo-Compound engines [N 5] that used less fuel at low altitude. [30] Unlike its Britannia forebear, the Argus was a hybrid, using the Britannia wings, tail surfaces and landing gear matched to a "purpose-built", unpressurised fuselage. It substituted North American materials and standard parts for British parts. [31]
The interior of the Argus was well equipped to conduct anti-submarine warfare — navigation, communication and tactical electronic equipment along with weapon loads that included bombs, torpedoes, mines and depth charges. [30] A total of 33 Argus aircraft were built in two series (Mk 1 and Mk 2), serving the Royal Canadian Air Force (RCAF) and Canadian Forces from 1957 to 1982. [32]
Canadair built 39 Canadair CL-44/Canadair CC-106 Yukon turboprop Rolls-Royce Tyne-powered aircraft, comprising 12 CC-106 Yukon for the RCAF and 27 CL-44D4 passenger/cargo variants for the civil market. Civilian operators typically operated the type as freighters. Four CL-44D4s were converted as CL-44Js with lengthened fuselages for service with the Icelandic "budget" airline Loftleiðir . The CL-44D4s were all built with swing-tails to allow straight-in cargo loading and served with a variety of carriers, most notably Flying Tiger Line. [32] [33] The similar CC-106 Yukon was used by the RCAF in a solely passenger configuration. [34]
A final "one-off" development was the Conroy Skymonster, nicknamed Guppy, based on a Canadair CL-44D4 N447T. The prominent modification was an enlarged fuselage, like the Mini Guppy, which was produced by Jack Conroy's previous company, Aero Spacelines. [35] After a long operational career as a freighter, the Guppy was stored at Bournemouth Airport in 2003 and was later sold. [36]
Following a long period of uneventful development flying trials and the fitting of a modified Proteus 765 series engine that greatly reduced breakdowns, a full Certificate of Airworthiness was awarded at the end of 1955. [26] The first two Model 102s were delivered to BOAC on 30 December 1955 for crew training. [37] The Model 102 began scheduled service on 1 February 1957 with a BOAC flight from London to Johannesburg, [38] flights to Sydney following in March and to Tokyo in July. By August 1957, the first 15 Model 102 aircraft had been delivered to BOAC. [39] The last 10 aircraft of the order were built as Series 300 aircraft for transatlantic flights. [39]
In April 1959, a Model 102 Britannia was leased by BOAC to Ghana Airways for flights between Accra and London, and several more Britannias were purchased by the airline in the early 1960s. [40] The Model 102 was eventually made available to other BOAC associates, including Cathay Pacific, Central Africa, East African, Nigeria and Malayan airlines. [41]
The next production series was based on the long-range, mixed passenger/freight Model 200 series that was intended for civil airline use, but ultimately Bristol offered the series to the Royal Air Force (RAF) instead. [41] The production series of three Model 252 and 20 Model 253 aircraft were purchased by RAF Transport Command in 1959, assigned the designation Britannia C.2 (first Model 252 series) and C.1 (Model 253 series). [42] Those in RAF service were allocated the names of stars, such as "Arcturus", "Sirius" and "Vega". On retirement from the RAF in 1975, many Model 200 series were subsequently used by independent civil operators for cargo operations, harkening back to their original intended role. [3] [43]
Although the Bristol Model 302 was built first as part of the original BOAC order, BOAC released this series to other airlines; Aeronaves de Mexico took two Model 302s, which entered service in December 1957. [41] The 18 Bristol Britannia 312s for BOAC were delivered from September 1957 with its service introduction on the first-ever non-stop flight from London to Canada on 19 December 1957. [38] In late December 1957, BOAC began regular Britannia flights from London to New York. [44] Other airlines, such as Israel's El Al , also operated the Britannia on transatlantic routes. [45]
In 1959, BOAC started flying the Britannia across the Pacific to Tokyo and Hong Kong, thus extending their network round the world. [38] The westbound routing in 1959 for these intercontinental BOAC Britannia flights between the U.K. and Asia was London-New York-San Francisco-Honolulu-Wake Island-Tokyo-Hong Kong. [46]
On 1 April 1958 Canadian Pacific Air Lines took delivery of the first of six Model 314 Britannias, [29] with an additional two Model 324s (built to a 320 standard) arriving later and sold to Cathay Pacific in 1961. [47] BOAC ordered seven Model 302s, but never took delivery, instead they were taken on by airlines including Aeronaves de México and Ghana Airways. [42] [48] The main long-range series were the 310s, of which BOAC took 18 and, after deliveries began in September 1957, put them into service between London and New York City; in March 1964 BOAC owned 50 aircraft, 10 being Britannia 312s. [49] BOAC's last scheduled Britannia flight was April 1965. [50]
The 310 series (the Model 318) also saw transatlantic service with Cubana de Aviación starting in 1958, in spite of the Cuban Revolution the airline had a special accord with British aircraft manufacturers to maintain this model of aircraft. [51] In 1975, multiple Cuban Britannias were used to transport hundreds of soldiers of the Cuban Revolutionary Armed Forces to Angola in Operation Carlota, a proxy war. [52] Cubana de Aviación continued to fly its fleet of Britannias until March 1990. [53]
Following the purchase of remaining spare parts from the Royal Aircraft Establishment and Cubana, Zaïrois airlines continued to operate several Britannias into the early 1990s on regular cargo flights from N'djili Airport to various destinations within the country. [54]
Most aircraft were built by Bristol at Filton, but 30 were built at Belfast by Short Brothers and Harland. [55] [56] Due to the extended development instead of a projected production of 180 Britannias, only 80 were sold. [25] The negative experience with the development of the Britannia caused BOAC to be more cautious towards other British-made aircraft such as the Vickers VC10. [57] Throughout the Britannia's lifespan, the engine icing condition remained a "continual potential hazard" that flight crews ultimately learned to manage with a "high-lo" flight regime that minimized the danger, [58] Squadron Leader David Berry who had 5,000 hours on the type characterised it as flying "Beauty and the Beast." [59] Aeroplane in "100 Great British Aircraft" (2008) said the Britannia counted among the "greats". [60]
Seventy-four passenger airliner with 114 ft (35m) fuselage and powered by four Bristol Proteus 705
All cargo variant with a 124 ft 3 in (38 m) fuselage, BOAC option for five was cancelled, none built. [62]
Similar to the 200 series, but mixed passenger and freight. [62]
Passenger-only "stretched" version of the 200 series, incorporating 123 inches (3.1 m) longer fuselage, capable of carrying up to 139 (originally 99) passengers, medium-fuel capacity. [66]
As 305 series, but with strengthened fuselage skin and undercarriage. Long-range fuel capacity and was originally known as 300LR.
Fourteen Britannias were lost with a total of 365 fatalities between 1954 and 1980. The worst accident was the 1967 Nicosia Britannia disaster with a loss of life totalling 126. [71]
Data from Britannia... Last of the Bristol Line [83]
General characteristics
Performance
Avionics
Related development
Aircraft of comparable role, configuration, and era
Related lists
Aviation Traders Limited (ATL) was a war-surplus aircraft and spares trader formed in 1947. In 1949, it began maintaining aircraft used by some of Britain's contemporary independent airlines on the Berlin Airlift. In the early 1950s, it branched out into aircraft conversions and manufacturing. During that period it also became a subcontractor for other aircraft manufacturers. By the end of the decade, it was taken over by the Airwork group.
An airliner is a type of airplane for transporting passengers and air cargo. Such aircraft are most often operated by airlines. The modern and most common variant of the airliner is a long, tube shaped, and jet powered aircraft. The largest of them are wide-body jets which are also called twin-aisle because they generally have two separate aisles running from the front to the back of the passenger cabin. These are usually used for long-haul flights between airline hubs and major cities. A smaller, more common class of airliners is the narrow-body or single-aisle. These are generally used for short to medium-distance flights with fewer passengers than their wide-body counterparts.
The Airspeed AS.57 Ambassador is a British twin piston-engined airliner that was designed and produced by the British aircraft manufacturer Airspeed Ltd. It was one of the first postwar airliners to be produced.
The Bristol Type 167 Brabazon was a large British piston-engined propeller-driven airliner designed by the Bristol Aeroplane Company to fly transatlantic routes between the UK and the United States. The type was named Brabazon after the Brabazon Committee and its chairman, Lord Brabazon of Tara, which had developed the specification to which the airliner was designed.
The Bristol Proteus was the Bristol Engine Company's first mass-produced gas turbine engine design, a turboprop that delivered just over 4,000 hp (3,000 kW). The Proteus was a reverse-flow gas turbine. Because the second turbine drove no compressor stages, but only the propeller, this engine was classified as a free-turbine. It powered the Bristol Britannia airliner, small naval patrol craft, hovercraft and electrical generating sets. It was also used to power a land-speed record car, the Bluebird-Proteus CN7. After the merger of Bristol with Armstrong Siddeley the engine became the Bristol Siddeley Proteus, and later the Rolls-Royce Proteus. The Proteus was to have been superseded by the Bristol Orion which would have given a Britannia a 75% increase in power for cruising faster.
The Brabazon Committee was a committee set up by the British government in 1942 to investigate the future needs of the British Empire's civilian airliner market following World War II. The study was an attempt at defining, in broad overview, the impact of projected advances in aviation technology and to forecast the global needs of the post war British Empire and Commonwealth in the area of air transport, for passengers, mail, and cargo.
The Saunders-Roe SR.45 Princess was a British flying boat aircraft developed and built by Saunders-Roe at their Cowes facility on the Isle of Wight. It is the largest all-metal flying boat to have ever been constructed.
The Vickers VC10 is a mid-sized, narrow-body long-range British jet airliner designed and built by Vickers-Armstrongs (Aircraft) Ltd and first flown at Brooklands, Surrey, in 1962. The VC10 is often compared to the larger Soviet Ilyushin Il-62, the two types being the only airliners to use a rear-engined quad layout, while the smaller business jet Lockheed JetStar also has this engine arrangement.
The Vickers Vanguard was a short/medium-range turboprop airliner designed and produced by the British aircraft manufacturer Vickers-Armstrongs.
The Boeing 377 Stratocruiser was a large long-range airliner developed from the C-97 Stratofreighter military transport, itself a derivative of the B-29 Superfortress. The Stratocruiser's first flight was on July 8, 1947. Its design was advanced for its day; its relatively innovative features included two passenger decks and a pressurized cabin. It could carry up to 100 passengers on the main deck plus 14 in the lower deck lounge; typical seating was for 63 or 84 passengers or 28 berthed and five seated passengers.
The Lockheed L-188 Electra is an American turboprop airliner built by Lockheed. First flown in 1957, it was the first large turboprop airliner built in the United States. With its fairly high power-to-weight ratio, huge propellers and very short wings, large Fowler flaps which significantly increased effective wing area when extended, and four-engined design, the airplane had airfield performance capabilities unmatched by many jet transport aircraft even today—particularly on short runways and high altitude airfields. Initial sales were good, but after two fatal crashes that led to expensive modifications to fix a design defect, no more were ordered. Jet airliners soon supplanted turboprops for many purposes, and many Electras were modified as freighters. Some Electras are still being used in various roles into the 21st century. The airframe was also used as the basis for the Lockheed P-3 Orion maritime patrol aircraft.
The Avro York was a British transport aircraft developed by Avro during the Second World War. The design was derived from the Avro Lancaster heavy bomber, several sections of the York and Lancaster being identical. Due to the importance of Lancaster production, York output proceeded slowly until 1944, after which a higher priority was placed upon transport aircraft.
The Handley Page HP.81 Hermes was a civilian airliner designed and produced by the British aircraft manufacturer Handley Page.
The Short 330 is a small turboprop transport aircraft produced by Short Brothers. It seats up to 30 people and was relatively inexpensive and had low maintenance costs at the time of its introduction in 1976. The 330 was based on the SC.7 Skyvan. The C-23 Sherpa was a military version of the 330. Production of the aircraft ended in 1992, after 141 were produced. The Short 360 was a development of the Short 330.
The Short Belfast is a heavy lift turboprop freighter that was built by British manufacturer Short Brothers at Belfast. Only 10 aircraft were constructed, all of which entered service with the Royal Air Force (RAF), who operated it under the designation Short Belfast C.1.
The Canadair CL-44 was a Canadian turboprop airliner and cargo aircraft based on the Bristol Britannia that was developed and produced by Canadair in the late 1950s and early 1960s. Although innovative, only a small number of the aircraft were produced for the Royal Canadian Air Force (RCAF), and for commercial operators worldwide.
Lloyd International Airways Ltd was a private, British independent airline formed in 1961 to operate worldwide charter flights. It commenced operations with a single Douglas DC-4 piston airliner from Cambridge Marshall Airport. Lloyd International concentrated on passenger and cargo charters with four-engined, long-range aircraft. It also had links in Hong Kong since its inception and flew to the Far East regularly. During the mid-1960s, the airline began re-equipping its fleet with Bristol Britannia and Canadair CL-44 turboprops, all of which featured large cargo doors and palletised freight systems. Long-range Boeing 707 jets joined the Lloyd International fleet during the early 1970s for use on affinity group passenger and freight charters to North America and the Far East. Lloyd International ceased operations in June 1972.
The Canadair North Star is a 1940s Canadian development, for Trans-Canada Air Lines (TCA), of the Douglas DC-4. Instead of radial piston engines used by the Douglas design, Canadair used Rolls-Royce Merlin V12 engines to achieve a higher cruising speed of 325 mph (523 km/h) compared with the 246 mph (396 km/h) of the standard DC-4. Requested by TCA in 1944, the prototype flew on 15 July 1946. The type was used by various airlines and by the Royal Canadian Air Force (RCAF). It proved to be reliable but noisy when in service through the 1950s and into the 1960s. Some examples continued to fly into the 1970s, converted to cargo aircraft.
The Vickers-Armstrongs V-1000 was a proposed jet-powered cargo aircraft that was designed to meet a requirement issued by the British Ministry of Supply which sought a strategic transport for the Royal Air Force (RAF) to support its strategic bomber fleet, particularly the V-bombers. The design bears many similarities to the Vickers Valiant, one of the V-bombers, but also featured substantial changes. In addition to its military application, both the Ministry and Vickers also intended to use the same basic design as the VC7, a six-abreast trans-Atlantic jet airliner for British Overseas Airways Corporation (BOAC).
Sir Archibald Russell, CBE, FRS was a British aerospace engineer who worked most of his career at the Bristol Aeroplane Company, before becoming managing director of the Filton Division when Bristol merged into British Aircraft Corporation in 1960. He also served as the vice-chairman of the BAC-Sud Aviation Concorde Committee that produced the Concorde, working alongside Morien Morgan. His designs include the Blenheim, Britannia, Type 188 and many others. He was known throughout his career as a perfectionist, as well as his criticism for those who did not measure up – criticisms that included ministers, civil servants, the Brabazon Committee and BOAC.