The Short SB.5 (serialWG768) was a "highly unorthodox, adjustable wing"[1]British research aircraft designed by Short Brothers in response to the UKAir MinistryrequirementER.100; to provide input for the design of the English Electric P.1 (prototype of the English Electric Lightning) by testing the low speed flight characteristics of various configurations of wing-sweep required for supersonic flight. The tailplane could be mounted either on top of the fin ("T-tail") or below the fuselage. The tests ultimately confirmed that the original P.1/Lightning design was an effective configuration for high speed flight.
A technical dispute arose between the Royal Aircraft Establishment and the English Electric Company (EEC) as to the optimum configuration for the company's proposed supersonic fighter. A single-seat, mid-winged research machine was built to investigate the low speed handling of the possible configurations. The same basic configuration of the P.1 was incorporated into a simpler testbed that had a fixed undercarriage.[2] Since the SB5 was to test the low-speed flight characteristics, there was no requirement for the undercarriage to be retractable.
The contract was awarded to Short Brothers and Harland Ltd of Belfast on 2 August 1950. The machine was designed to allow three different wing sweep angles (50°, 60° and 69°). The sweep adjustment of the wings was made when the aircraft was on the ground. Two different tail plane positions (a) low on the rear fuselage and (b) on top of the fin, were also tested. "The complete rear fuselage, just aft of the engine, was detachable and two alternative rear fuselages were available, one with the tailplane set on top of the fin and the other with the tailplane set below the fuselage. The tailplane angle was adjustable in flight, being electrically actuated."[3]
The wings were made "of plywood, except for light alloy sheeting at the leading and trailing edges,"[3] which restricted the maximimum speed to a modest 350 knots (403mph; 649km/h).
"Two 20 feet [6.1 m] circumference brake parachutes and one 20 feet [6.1 m] anti-spin parachute ... housed in the rear fuselage above the jet pipe."[3]
The flight test report of the SB5 with 60 degrees of sweep and the tailplane in the lower position summarised the design criteria:
"At the time of the initial conception of the Short SB5 research aircraft (1949), it was recognised that the trend towards higher angles of sweepback was likely to continue, and this was emphasised by the existence of a design for an operational fighter aircraft, the English Electric P1 (Lightning), which was to have a sweepback of 60°. There was then no flight experience with wings of this amount of sweepback. The SB5 was designed to allow a gradual approach to this configuration, flying initially with 50° sweepback before conversion to 60° when it would resemble, aerodynamically, a seven-eighths scale model of the Lightning. To increase its usefulness as a research vehicle, the aircraft was capable of further modification to operate with 69° of wing sweepback."[3]
Operational testing
The Short SB.5 wearing the '28' code of the Empire Test Pilots School, on display at RAF Finningley, in 1969
Testing was conducted with increasing degrees of sweep and with the tailplane in both of its two possible positions. The first flight, with the sweep set to 50°, was made from Boscombe Down by the Chief Test Pilot of Shorts, Tom Brooke-Smith on 2 December 1952. In 1953, he gave an impressive display of the SB5's manœvrability and speed at the Society of British Aircraft Constructors Air Display at Farnborough.
In July 1953, the first test flights were carried out with the wing-sweep set to the intermediate angle of 60° and with the "T-tail." Testing with the lower tailplane position commenced in January 1954, so that flight-test feedback could be made available prior to the first flight of the P.1. It was eventually determined that the "T-tail" configuration was unsatisfactory. Testing in the 60° sweep configuration was completed in April 1958.
Before evaluating the final wing sweep configuration of 69°, a Martin-Baker ejection seat was fitted for the first time and the Rolls-Royce Derwent engine was changed for a Bristol Orpheus of greater thrust.[2] The first flight, with the final sweep setting of 69° was made by Denis Tayler on 18 October 1960 at RAE Bedford; this was, at the time, the greatest degree of wing-sweep in the world.[4]
The experience gained with the SB5 validated the wing-sweep and low tailplane configuration adopted for the P.1, which was to become the English Electric Lightning.[5] Over eleven months, the tests with 50° and 60° sweep were concluded with the high tail configuration. In January 1954, the low tail rear fuselage was fitted and tests continued for a further two years and proved that the EEC configuration was correct.
After completion of its test programme, the SB5 eventually joined the fleet of the Empire Test Pilots' School (ETPS) at Farnborough in 1967, as is evidenced by the ETPS 25th Anniversary brochure in 1968. The Empire Test Pilots School flew the machine to give students experience in flight-testing "slender" aircraft.[4]
The SB.5 is now on display in the RAF Museum, Cosford in Shropshire (with both of its tails).[2]
Buttler, Tony and Jean-Louis Delezenne. X-Planes of Europe: Secret Research Aircraft from the Golden Age 1946-1974. Manchester, UK: Hikoki Publications, 2012. ISBN978-1-902-10921-3
Taylor, John W.R. Jane's Pocket Book of Research and Experimental Aircraft, London, Macdonald and Jane's Publishers Ltd, 1976. ISBN0356 08409 4.
Warner, Guy (July–August 2002). "From Bombay to Bombardier: Aircraft Production at Sydenham, Part One". Air Enthusiast. No.100. pp.13–24. ISSN0143-5450.
A delta wing is a wing shaped in the form of a triangle. It is named for its similarity in shape to the Greek uppercase letter delta (Δ).
A flying wing is a tailless fixed-wing aircraft that has no definite fuselage, with its crew, payload, fuel, and equipment housed inside the main wing structure. A flying wing may have various small protuberances such as pods, nacelles, blisters, booms, or vertical stabilizers.
The English Electric Lightning is a British fighter aircraft that served as an interceptor during the 1960s, the 1970s and into the late 1980s. It remains the only UK-designed-and-built fighter capable of Mach 2. The Lightning was designed, developed, and manufactured by English Electric, which was later merged into the newly-formed British Aircraft Corporation. Later the type was marketed as the BAC Lightning. It was operated by the Royal Air Force (RAF), the Kuwait Air Force (KAF), and the Royal Saudi Air Force (RSAF).
A swept wing is a wing that angles either backward or occasionally forward from its root rather than in a straight sideways direction.
The Lockheed L-2000 was Lockheed Corporation's entry in a government-funded competition to build the United States' first supersonic airliner in the 1960s. The L-2000 lost the contract to the Boeing 2707, but that competing design was ultimately canceled for political, environmental and economic reasons.
The Gloster Javelin is a twin-engined T-tailed delta-wing subsonic night and all-weather interceptor aircraft that served with Britain's Royal Air Force from the mid-1950s until the late 1960s. The last aircraft design to bear the Gloster name, it was introduced in 1956 after a lengthy development period and received several upgrades during its lifetime to its engines, radar and weapons, which included the De Havilland Firestreak air-to-air missile.
The Bell X-5 was the first aircraft capable of changing the sweep of its wings in flight. It was inspired by the untested wartime P.1101 design of the German Messerschmitt company. In contrast with the German design, which could only have its wing sweepback angle adjusted on the ground, the Bell engineers devised a system of electric motors to adjust the sweep in flight.
The Grumman XF10F Jaguar was a prototype swing-wing fighter aircraft offered to the United States Navy in the early 1950s. Although it never entered service, its research pointed the way toward the later General Dynamics F-111 and Grumman's own F-14 Tomcat.
The empennage, also known as the tail or tail assembly, is a structure at the rear of an aircraft that provides stability during flight, in a way similar to the feathers on an arrow. The term derives from the French language verb empenner which means "to feather an arrow". Most aircraft feature an empennage incorporating vertical and horizontal stabilising surfaces which stabilise the flight dynamics of yaw and pitch, as well as housing control surfaces.
The Lockheed CL-1200 Lancer was a late 1960s company-funded proposal for a fighter aircraft based on the Lockheed F-104 Starfighter. The CL-1200 was conceived and marketed mainly for and to non-US military services, as an export product. As such it would have competed with combat-proven designs like the Dassault Mirage III, McDonnell Douglas F-4 Phantom II, Mikoyan-Gurevich MiG-21, and Northrop F-5E Tiger II. The CL-1200 competed unsuccessfully against proposed fourth generation designs, under the US government's Lightweight Fighter program, which would eventually result in the General Dynamics F-16 and Northrop F-17 Cobra.
A vertical stabilizer or tail fin is the static part of the vertical tail of an aircraft. The term is commonly applied to the assembly of both this fixed surface and one or more movable rudders hinged to it. Their role is to provide control, stability and trim in yaw. It is part of the aircraft empennage, specifically of its stabilizers.
A tandem wing is a wing configuration in which a flying craft or animal has two or more sets of wings set one behind another. All the wings contribute to lift.
An aircraft stabilizer is an aerodynamic surface, typically including one or more movable control surfaces, that provides longitudinal (pitch) and/or directional (yaw) stability and control. A stabilizer can feature a fixed or adjustable structure on which any movable control surfaces are hinged, or it can itself be a fully movable surface such as a stabilator. Depending on the context, "stabilizer" may sometimes describe only the front part of the overall surface.
The Messerschmitt P.1101 was a single-seat, single-jet fighter project of World War II, developed as part of the 15 July 1944 Emergency Fighter Program which sought a second generation of jet fighters for the Third Reich. A prominent feature of the P.1101 prototype was that the sweep angle of the wings could be changed before flight, a feature further developed in later variable-sweep aircraft such as the Bell X-5 and Grumman XF10F Jaguar.
The NASA AD-1 was both an aircraft and an associated flight test program conducted between 1979 and 1982 at the NASA Dryden Flight Research Center, Edwards California, which successfully demonstrated an aircraft wing that could be pivoted obliquely from zero to 60 degrees during flight.
The Boulton Paul P.120 was a research aircraft designed and produced by the British aircraft manufacturer Boulton Paul. It was the last aircraft design by the company to be flown.
The Short SB.4 Sherpa was an experimental aircraft designed and produced by the British aircraft manufacturer Short Brothers. Only a single example was ever produced.
A tailless aircraft has no other horizontal aerodynamic surface besides its main wing. It may still have a fuselage, vertical tail fin and/or vertical rudder.
The wing configuration of a fixed-wing aircraft is its arrangement of lifting and related surfaces.
The Arsenal 2301, Arsenal Ars.2301, SFECMAS 1301 or SFECMAS Ars.1301 was an experimental French air-launched glider, built to test the aerodynamics of aircraft of novel configuration at full scale. It first flew in 1951 with swept wings but after 1953 it had a delta wing. Trials with this wing established the layouts of the Nord Gerfaut and Griffon.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
